rtl8812au-chinawrj/README.md
Christian B 083a5592e0
Update README.md
* Removed "TODO" tab, as we're aware of the problems/issues on the drivers and it's better to use issue reports rather than updating the README.md all the time.
2017-12-06 10:30:04 +01:00

98 lines
2.5 KiB
Markdown

# RTL8812AU/21AU and RTL8814AU drivers
# with monitor mode and frame injection
## DKMS
This driver can be installed using [DKMS]. This is a system which will automatically recompile and install a kernel module when a new kernel gets installed or updated. To make use of DKMS, install the `dkms` package, which on Debian (based) systems is done like this:
```
sudo apt install dkms
```
## Installation of Driver
In order to install the driver open a terminal in the directory with the source code and execute the following command:
```
sudo ./dkms-install.sh
```
## Removal of Driver
In order to remove the driver from your system open a terminal in the directory with the source code and execute the following command:
```
sudo ./dkms-remove.sh
```
## Make
For building & installing the RTL8812AU driver with 'make' use
```
make
make install
```
and for building & installing the RTL8814AU driver with 'make' use
```
make RTL8814=1
make install RTL8814=1
```
## Notes
Download
```
git clone -b v5.1.5 https://github.com/aircrack-ng/rtl8812au.git
cd rtl*
```
Package / Build dependencies
```
sudo apt-get install build-essential
sudo apt-get install linux-headers-`uname -r`
```
For setting monitor mode
1. Fix problematic interference in monitor mode.
```
airmon-ng check kill
```
You may also uncheck the box "Automatically connect to this network when it is avaiable" in nm-connection-editor. This only works if you have a saved wifi connection.
2. Set interface down
```
sudo ip link set wlan0 down
```
3. Set monitor mode
```
sudo iw dev wlan0 set type monitor
```
4. Set interface up
```
sudo ip link set wlan0 up
```
For setting TX power
```
sudo iwconfig wlan0 txpower 30
```
or
```
sudo iw wlan0 set txpower fixed 3000
```
For Ubuntu 17.04 add the following lines
```
[device]
wifi.scan-rand-mac-address=no
```
at the end of file /etc/NetworkManager/NetworkManager.conf and restart NetworkManager with the command:
```
sudo service NetworkManager restart
```
## LED Parameter
```
We've added the "realtek-leds.conf" in build directory,
with this you may change the leds to
"2: Allways On", "1: Normal" or "0: Allways Off" with placing the file in "/etc/modprobe.d/
Manual modprobe will override this file if option value also included at the command line, e.g.,
$ sudo modprobe -r 8812au
$ sudo modprobe 8812au rtw_led_ctrl=1
```
## Credits
```
astsam - for the main work + monitor/injection support - https://github.com/astsam
evilphish - for great patching (USB3, VHT + txpower control +++) - https://github.com/evilphish
```