172 lines
6.0 KiB
Markdown
172 lines
6.0 KiB
Markdown
### FAQ
|
|
|
|
Question: Is WPA3 supported?
|
|
|
|
Answer: WPA3-SAE is supported. It works well on most modern Linux distros but
|
|
not all. Generally the reason for WPA3 not working on Linux distros is that the
|
|
distro has an old version of wpa_supplicant or Network Manager. Your options
|
|
are to upgrade to a more modern distro (distros released after mid 2022) or
|
|
compile and install new versions of wpa_supplicant and/or Network Manager.
|
|
|
|
-----
|
|
|
|
Question: I bought two usb wifi adapters based on this chipset and am planning
|
|
to use both in the same computer. How do I set that up?
|
|
|
|
Answer: Realtek drivers do not support more than one adapter with the
|
|
same chipset in the same computer. You can have multiple Realtek based
|
|
adapters in the same computer as long as the adapters are based on
|
|
different chipsets.
|
|
|
|
-----
|
|
|
|
Question: Why do you recommend Mediatek based adapters when you maintain
|
|
this repo for a Realtek driver?
|
|
|
|
Answer: Many new and existing Linux users already have adapters based on
|
|
Realtek chipsets. This repo is for Linux users to support their existing
|
|
adapters but my STRONG recommendation is for Linux users to seek out USB
|
|
WiFi solutions based on Mediatek chipsets:
|
|
|
|
https://github.com/morrownr/USB-WiFi
|
|
|
|
-----
|
|
|
|
Question: Will you put volunteers to work?
|
|
|
|
Answer: Yes. Post a message in `Issues` or `Discussions` if interested.
|
|
|
|
-----
|
|
|
|
Question: I am having problems with my adapter and I use Virtualbox?
|
|
|
|
Answer: This [article](https://null-byte.wonderhowto.com/forum/wifi-hacking-attach-usb-wireless-adapter-with-virtual-box-0324433/) may help.
|
|
|
|
-----
|
|
|
|
Question: The driver installation script completed successfully and the
|
|
driver is installed but does not seem to be working. What is wrong?
|
|
|
|
Answer: Turn secure boot off to see if that allows the driver to work.
|
|
This driver is primarily tested on Debian based distros such as Ubuntu,
|
|
Raspberry Pi OS and Kali. In an attempt to make this driver work well on
|
|
many Linux distros, other distros, including the Arch based Manjaro is
|
|
used for testing. Currently I do not have installations of Fedora or
|
|
OpenSUSE available for testing and reply on user reports of success or
|
|
failure. I have two test systems with secure boot on so as to test secure
|
|
boot. I have not seen any secure boot problems with Debian based systems
|
|
and I don't remember problems with Manjaro.
|
|
|
|
dkms is used in the installation script. It helps with a lot of issues that
|
|
will come up if a simple manual installation is used. dkms has the
|
|
capability to handle the needs of secure boot. dkms was written by and is
|
|
maintained by Dell. Dell has been offering some Ubuntu pre-loaded systems
|
|
for years so their devs likely test on Ubuntu. I suspect Fedora and
|
|
OpenSUSE may be handing their secure boot support differently than Debian
|
|
based systems and this is leading to problems. This and the other repos
|
|
I have are VERY heavily used and I am sure there are plenty of non-Debian
|
|
users that use this driver. Are they all turning off secure boot and not
|
|
reporting the problem? I don't know. What I do know is that reports like
|
|
this are rare.
|
|
|
|
For the driver to compile and install correctly but not be available
|
|
tells me there is likely a key issue. Here is an interesting link
|
|
regarding Debian systems and secure boot:
|
|
|
|
https://wiki.debian.org/SecureBoot
|
|
|
|
That document contains a lot of information that can help an investigation
|
|
into what the real problem is and I invite you and other Fedora, OpemSUSE
|
|
and users of other distros that show this problem to investigate and
|
|
present what you know to the devs of your distro via their problem
|
|
reporting system. Turning off secure boot is NOT a fix. A real fix needs
|
|
to happen.
|
|
|
|
-----
|
|
|
|
Question: Can you provide additional information about monitor mode?
|
|
|
|
Answer: I have a repo that is setup to help with monitor mode:
|
|
|
|
https://github.com/morrownr/Monitor_Mode
|
|
|
|
Work to improve monitor mode is ongoing with this driver. Your
|
|
reports of success or failure are needed. If you have yet to buy an
|
|
adapter to use with monitor mode, there are adapters available that are
|
|
known to work very well with monitor mode. My recommendation for those
|
|
looking to buy an adapter for monitor mode is to buy adapters based on
|
|
the following chipsets: mt7921au, mt7612u, mt7610u, rtl8812au, rtl8821cu and
|
|
rtl8811au. My specific recommendations for adapters in order of
|
|
preference are:
|
|
|
|
ALFA AWUS036ACHM - long range - in-kernel driver
|
|
|
|
ALFA AWUS036ACM - in-kernel driver
|
|
|
|
ALFA AWUS036ACH - long range - [driver](https://github.com/morrownr/8812au-20210629)
|
|
|
|
ALFA AWUS036ACS - [driver](https://github.com/morrownr/8821au-20210708)
|
|
|
|
To ask questions, go to [USB-WiFi](https://github.com/morrownr/USB-WiFi)
|
|
and post in `Discussions` or `Issues`.
|
|
|
|
-----
|
|
|
|
Question: I have an adapter with the 8821cu chipset and it supports
|
|
bluetooth. The bluetooth works but the wifi does not. What is wrong?
|
|
|
|
Answer: There appears to be an issue where adapters can be set up differently
|
|
by makers. The fix is to set the driver option ( `rtw_RFE_type` ) in 8821cu.conf.
|
|
The easiest way to edit 8821cu.conf is to run the following from the driver
|
|
directory:
|
|
|
|
```
|
|
sudo ./edit-options.sh
|
|
```
|
|
|
|
Once in the document, you can scroll down to the documentation about
|
|
`rtw_RFE_type`. You will likely have to experiment to find out what setting
|
|
works best for your adapter but a good place to start is probably...
|
|
|
|
```
|
|
rtw_RFE_type=7
|
|
```
|
|
|
|
Simply add that option to the end of the `options` line, save and reboot.
|
|
|
|
-----
|
|
|
|
Question: How do I disable the onboard WiFi in a Raspberry Pi?
|
|
|
|
Note: This answer is for the Raspberry Pi OS.
|
|
|
|
Answer:
|
|
|
|
Add the following line to `/boot/config.txt`
|
|
|
|
```
|
|
dtoverlay=disable-wifi
|
|
```
|
|
|
|
-----
|
|
|
|
Question: How do I forget a saved WiFi network on a Raspberry Pi?
|
|
|
|
Note: This answer is for the Raspberry Pi OS without Network Manager active.
|
|
|
|
Step 1: Edit `wpa_supplicant.conf`
|
|
|
|
```
|
|
sudo ${EDITOR} /etc/wpa_supplicant/wpa_supplicant.conf
|
|
```
|
|
|
|
Note: Replace ${EDITOR} with the name of the text editor you wish to use.
|
|
|
|
#### Step 2: Delete the relevant WiFi network block (including the '`network=`' and opening/closing braces).
|
|
|
|
#### Step 3: Save the file.
|
|
|
|
#### Step 4: Reboot
|
|
|
|
-----
|