mirrors/rtl8812au
1
0
Fork 0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2024-11-05 11:00:45 +00:00
Code Releases Activity
cf7aa86c38
rtl8812au/include/hal_data.h.edited
Hans Ulli Kroll d62c22e76e Add driver from found on aircrack-ng site 
filename: rtl8812AU_8821AU_linux_v4.3.22_15054.20150901_beta.tar.gz

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
2016-03-27 19:56:02 +02:00

653 lines
18 KiB
Plaintext
Executable File
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __HAL_DATA_H__
#define __HAL_DATA_H__
#if 1//def CONFIG_SINGLE_IMG
#include "../hal/phydm/phydm_precomp.h"
#ifdef CONFIG_BT_COEXIST
#include <hal_btcoex.h>
#endif
#ifdef CONFIG_SDIO_HCI
#include <hal_sdio.h>
#endif
#ifdef CONFIG_GSPI_HCI
#include <hal_gspi.h>
#endif
//
// <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06.
//
typedef enum _RT_MULTI_FUNC{
RT_MULTI_FUNC_NONE = 0x00,
RT_MULTI_FUNC_WIFI = 0x01,
RT_MULTI_FUNC_BT = 0x02,
RT_MULTI_FUNC_GPS = 0x04,
}RT_MULTI_FUNC,*PRT_MULTI_FUNC;
//
// <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08.
//
typedef enum _RT_POLARITY_CTL {
RT_POLARITY_LOW_ACT = 0,
RT_POLARITY_HIGH_ACT = 1,
} RT_POLARITY_CTL, *PRT_POLARITY_CTL;
// For RTL8723 regulator mode. by tynli. 2011.01.14.
typedef enum _RT_REGULATOR_MODE {
RT_SWITCHING_REGULATOR = 0,
RT_LDO_REGULATOR = 1,
} RT_REGULATOR_MODE, *PRT_REGULATOR_MODE;
//
// Interface type.
//
typedef enum _INTERFACE_SELECT_PCIE{
INTF_SEL0_SOLO_MINICARD = 0, // WiFi solo-mCard
INTF_SEL1_BT_COMBO_MINICARD = 1, // WiFi+BT combo-mCard
INTF_SEL2_PCIe = 2, // PCIe Card
} INTERFACE_SELECT_PCIE, *PINTERFACE_SELECT_PCIE;
typedef enum _INTERFACE_SELECT_USB{
INTF_SEL0_USB = 0, // USB
INTF_SEL1_USB_High_Power = 1, // USB with high power PA
INTF_SEL2_MINICARD = 2, // Minicard
INTF_SEL3_USB_Solo = 3, // USB solo-Slim module
INTF_SEL4_USB_Combo = 4, // USB Combo-Slim module
INTF_SEL5_USB_Combo_MF = 5, // USB WiFi+BT Multi-Function Combo, i.e., Proprietary layout(AS-VAU) which is the same as SDIO card
} INTERFACE_SELECT_USB, *PINTERFACE_SELECT_USB;
typedef enum _RT_AMPDU_BRUST_MODE{
RT_AMPDU_BRUST_NONE = 0,
RT_AMPDU_BRUST_92D = 1,
RT_AMPDU_BRUST_88E = 2,
RT_AMPDU_BRUST_8812_4 = 3,
RT_AMPDU_BRUST_8812_8 = 4,
RT_AMPDU_BRUST_8812_12 = 5,
RT_AMPDU_BRUST_8812_15 = 6,
RT_AMPDU_BRUST_8723B = 7,
}RT_AMPDU_BRUST,*PRT_AMPDU_BRUST_MODE;
/*
#define CHANNEL_MAX_NUMBER 14+24+21 // 14 is the max channel number
*/
#define CHANNEL_GROUP_MAX (3 + 9) /* ch1~3, ch4~9, ch10~14 total three groups */
#define MAX_PG_GROUP 13
// Tx Power Limit Table Size
#define MAX_REGULATION_NUM 4
#define MAX_RF_PATH_NUM_IN_POWER_LIMIT_TABLE 4
#define MAX_2_4G_BANDWIDTH_NUM 2
#define MAX_RATE_SECTION_NUM 10
#define MAX_5G_BANDWIDTH_NUM 4
#define MAX_BASE_NUM_IN_PHY_REG_PG_2_4G 10 // CCK:1,OFDM:1, HT:4, VHT:4
#define MAX_BASE_NUM_IN_PHY_REG_PG_5G 9 // OFDM:1, HT:4, VHT:4
//###### duplicate code,will move to ODM #########
//#define IQK_MAC_REG_NUM 4
//#define IQK_ADDA_REG_NUM 16
//#define IQK_BB_REG_NUM 10
#define IQK_BB_REG_NUM_92C 9
#define IQK_BB_REG_NUM_92D 10
#define IQK_BB_REG_NUM_test 6
#define IQK_Matrix_Settings_NUM_92D 1+24+21
//#define HP_THERMAL_NUM 8
//###### duplicate code,will move to ODM #########
#ifdef CONFIG_USB_RX_AGGREGATION
typedef enum _USB_RX_AGG_MODE{
USB_RX_AGG_DISABLE,
USB_RX_AGG_DMA,
USB_RX_AGG_USB,
USB_RX_AGG_MIX
}USB_RX_AGG_MODE;
//#define MAX_RX_DMA_BUFFER_SIZE 10240 // 10K for 8192C RX DMA buffer
#endif
/* For store initial value of BB register */
typedef struct _BB_INIT_REGISTER {
u16 offset;
u32 value;
} BB_INIT_REGISTER, *PBB_INIT_REGISTER;
#define PAGE_SIZE_128 128
#define PAGE_SIZE_256 256
#define PAGE_SIZE_512 512
#define HCI_SUS_ENTER 0
#define HCI_SUS_LEAVING 1
#define HCI_SUS_LEAVE 2
#define HCI_SUS_ENTERING 3
#define HCI_SUS_ERR 4
#ifdef CONFIG_AUTO_CHNL_SEL_NHM
typedef enum _ACS_OP {
ACS_INIT, /*ACS - Variable init*/
ACS_RESET, /*ACS - NHM Counter reset*/
ACS_SELECT, /*ACS - NHM Counter Statistics */
} ACS_OP;
typedef enum _ACS_STATE {
ACS_DISABLE,
ACS_ENABLE,
} ACS_STATE;
struct auto_chan_sel {
ATOMIC_T state;
u8 ch; /* previous channel*/
};
#endif /*CONFIG_AUTO_CHNL_SEL_NHM*/
#define EFUSE_FILE_UNUSED 0
#define EFUSE_FILE_FAILED 1
#define EFUSE_FILE_LOADED 2
#define MACADDR_FILE_UNUSED 0
#define MACADDR_FILE_FAILED 1
#define MACADDR_FILE_LOADED 2
#define KFREE_FLAG_ON BIT0
#define KFREE_FLAG_THERMAL_K_ON BIT1
struct kfree_data_t {
u8 flag;
s8 bb_gain[BB_GAIN_NUM][RF_PATH_MAX];
#ifdef CONFIG_IEEE80211_BAND_5GHZ
s8 pa_bias_5g[RF_PATH_MAX];
s8 pad_bias_5g[RF_PATH_MAX];
#endif
s8 thermal;
};
bool kfree_data_is_bb_gain_empty(struct kfree_data_t *data);
struct hal_spec_t {
u8 macid_num;
u8 sec_cam_ent_num;
u8 sec_cap;
u8 nss_num;
u8 band_cap; /* value of BAND_CAP_XXX */
u8 bw_cap; /* value of BW_CAP_XXX */
u8 wl_func; /* value of WL_FUNC_XXX */
};
typedef struct hal_com_data
{
HAL_VERSION VersionID;
RT_MULTI_FUNC MultiFunc; // For multi-function consideration.
RT_POLARITY_CTL PolarityCtl; // For Wifi PDn Polarity control.
RT_REGULATOR_MODE RegulatorMode; // switching regulator or LDO
u8 hw_init_completed;
/****** FW related ******/
u16 FirmwareVersion;
u16 FirmwareVersionRev;
u16 FirmwareSubVersion;
u16 FirmwareSignature;
u8 RegFWOffload;
u8 fw_ractrl;
u8 FwRsvdPageStartOffset; /* 2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.*/
u8 LastHMEBoxNum; /* H2C - for host message to fw */
/****** current WIFI_PHY values ******/
WIRELESS_MODE CurrentWirelessMode;
CHANNEL_WIDTH CurrentChannelBW;
BAND_TYPE CurrentBandType; /* 0:2.4G, 1:5G */
BAND_TYPE BandSet;
u8 CurrentChannel;
u8 CurrentCenterFrequencyIndex1;
u8 nCur40MhzPrimeSC; /* Control channel sub-carrier */
u8 nCur80MhzPrimeSC; /* used for primary 40MHz of 80MHz mode */
BOOLEAN bSwChnlAndSetBWInProgress;
u8 bDisableSWChannelPlan; /* flag of disable software change channel plan */
u16 BasicRateSet;
u32 ReceiveConfig;
BOOLEAN bSwChnl;
BOOLEAN bSetChnlBW;
BOOLEAN bChnlBWInitialized;
#ifdef CONFIG_AUTO_CHNL_SEL_NHM
struct auto_chan_sel acs;
#endif
/****** rf_ctrl *****/
u8 rf_chip;
u8 rf_type;
u8 PackageType;
u8 NumTotalRFPath;
/****** Debug ******/
u16 ForcedDataRate; /* Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M. */
u8 u1ForcedIgiLb; /* forced IGI lower bound */
u8 bDumpRxPkt;
u8 bDumpTxPkt;
u8 bDisableTXPowerTraining;
/****** EEPROM setting.******/
u8 bautoload_fail_flag;
u8 efuse_file_status;
u8 macaddr_file_status;
u8 EepromOrEfuse;
u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /*92C:256bytes, 88E:512bytes, we use union set (512bytes)*/
u8 InterfaceSel; /* board type kept in eFuse */
u16 CustomerID;
u16 EEPROMVID;
u16 EEPROMSVID;
#ifdef CONFIG_USB_HCI
u16 EEPROMPID;
u16 EEPROMSDID;
#endif
#ifdef CONFIG_PCI_HCI
u16 EEPROMDID;
u16 EEPROMSMID;
#endif
u8 EEPROMCustomerID;
u8 EEPROMSubCustomerID;
u8 EEPROMVersion;
u8 EEPROMRegulatory;
u8 EEPROMThermalMeter;
u8 EEPROMBluetoothCoexist;
u8 EEPROMBluetoothType;
u8 EEPROMBluetoothAntNum;
u8 EEPROMBluetoothAntIsolation;
u8 EEPROMBluetoothRadioShared;
u8 bTXPowerDataReadFromEEPORM;
u8 EEPROMMACAddr[ETH_ALEN];
#ifdef CONFIG_RF_GAIN_OFFSET
u8 EEPROMRFGainOffset;
u8 EEPROMRFGainVal;
struct kfree_data_t kfree_data;
#endif /*CONFIG_RF_GAIN_OFFSET*/
#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B)
u8 adjuseVoltageVal;
#endif
u8 EfuseUsedPercentage;
u16 EfuseUsedBytes;
/*u8 EfuseMap[2][HWSET_MAX_SIZE_JAGUAR];*/
EFUSE_HAL EfuseHal;
/*---------------------------------------------------------------------------------*/
//3 [2.4G]
u8 Index24G_CCK_Base[MAX_RF_PATH][CENTER_CH_2G_NUM];
u8 Index24G_BW40_Base[MAX_RF_PATH][CENTER_CH_2G_NUM];
//If only one tx, only BW20 and OFDM are used.
s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
//3 [5G]
u8 Index5G_BW40_Base[MAX_RF_PATH][CENTER_CH_5G_ALL_NUM];
u8 Index5G_BW80_Base[MAX_RF_PATH][CENTER_CH_5G_80M_NUM];
s8 OFDM_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW80_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
u8 Regulation2_4G;
u8 Regulation5G;
u8 TxPwrInPercentage;
/********************************
* TX power by rate table at most 4RF path.
* The register is
*
* VHT TX power by rate off setArray =
* Band:-2G&5G = 0 / 1
* RF: at most 4*4 = ABCD=0/1/2/3
* CCK=0 OFDM=1/2 HT-MCS 0-15=3/4/56 VHT=7/8/9/10/11
**********************************/
u8 TxPwrByRateTable;
u8 TxPwrByRateBand;
s8 TxPwrByRateOffset[TX_PWR_BY_RATE_NUM_BAND]
[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RATE];
//---------------------------------------------------------------------------------//
/*
//2 Power Limit Table
u8 TxPwrLevelCck[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
u8 TxPwrLevelHT40_1S[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
u8 TxPwrLevelHT40_2S[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
s8 TxPwrHt20Diff[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
u8 TxPwrLegacyHtDiff[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
*/
u8 tx_pwr_lmt_5g_20_40_ref;
// Power Limit Table for 2.4G
s8 TxPwrLimit_2_4G[MAX_REGULATION_NUM]
[MAX_2_4G_BANDWIDTH_NUM]
[MAX_RATE_SECTION_NUM]
[CENTER_CH_2G_NUM]
[MAX_RF_PATH];
// Power Limit Table for 5G
s8 TxPwrLimit_5G[MAX_REGULATION_NUM]
[MAX_5G_BANDWIDTH_NUM]
[MAX_RATE_SECTION_NUM]
[CENTER_CH_5G_ALL_NUM]
[MAX_RF_PATH];
// Store the original power by rate value of the base of each rate section of rf path A & B
u8 TxPwrByRateBase2_4G[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[MAX_BASE_NUM_IN_PHY_REG_PG_2_4G];
u8 TxPwrByRateBase5G[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[MAX_BASE_NUM_IN_PHY_REG_PG_5G];
<<<<<<< .mine
u8 TxPwrShadow[MAX_RF_PATH][DESC_RATEMAX];
=======
u8 txpwr_by_rate_loaded:1;
u8 txpwr_by_rate_from_file:1;
u8 txpwr_limit_loaded:1;
u8 txpwr_limit_from_file:1;
>>>>>>> .r15056
// For power group
/*
u8 PwrGroupHT20[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
u8 PwrGroupHT40[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
*/
u8 PGMaxGroup;
// The current Tx Power Level
u8 CurrentCckTxPwrIdx;
u8 CurrentOfdm24GTxPwrIdx;
u8 CurrentBW2024GTxPwrIdx;
u8 CurrentBW4024GTxPwrIdx;
// Read/write are allow for following hardware information variables
u8 pwrGroupCnt;
u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
u32 CCKTxPowerLevelOriginalOffset;
u8 CrystalCap;
u8 PAType_2G;
u8 PAType_5G;
u8 LNAType_2G;
u8 LNAType_5G;
u8 ExternalPA_2G;
u8 ExternalLNA_2G;
u8 ExternalPA_5G;
u8 ExternalLNA_5G;
u16 TypeGLNA;
u16 TypeGPA;
u16 TypeALNA;
u16 TypeAPA;
u16 RFEType;
u8 bLedOpenDrain; /* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */
u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
BB_REGISTER_DEFINITION_T PHYRegDef[MAX_RF_PATH]; //Radio A/B/C/D
u32 RfRegChnlVal[MAX_RF_PATH];
//RDG enable
BOOLEAN bRDGEnable;
u8 RegTxPause;
// Beacon function related global variable.
u8 RegBcnCtrlVal;
u8 RegFwHwTxQCtrl;
u8 RegReg542;
u8 RegCR_1;
u8 Reg837;
u16 RegRRSR;
/****** antenna diversity ******/
u8 CurAntenna;
u8 AntDivCfg;
u8 AntDetection;
u8 TRxAntDivType;
u8 ant_path; //for 8723B s0/s1 selection
u32 AntennaTxPath; /* Antenna path Tx */
u32 AntennaRxPath; /* Antenna path Rx */
/******** PHY DM & DM Section **********/
u8 DM_Type;
_lock IQKSpinLock;
u8 INIDATA_RATE[MACID_NUM_SW_LIMIT];
/* Upper and Lower Signal threshold for Rate Adaptive*/
int EntryMinUndecoratedSmoothedPWDB;
int EntryMaxUndecoratedSmoothedPWDB;
int MinUndecoratedPWDBForDM;
DM_ODM_T odmpriv;
u8 bIQKInitialized;
u8 bNeedIQK;
/******** PHY DM & DM Section **********/
// 2010/08/09 MH Add CU power down mode.
BOOLEAN pwrdown;
// Add for dual MAC 0--Mac0 1--Mac1
u32 interfaceIndex;
#ifdef CONFIG_P2P
u8 p2p_ps_offload;
#endif
/* Auto FSM to Turn On, include clock, isolation, power control for MAC only */
u8 bMacPwrCtrlOn;
u8 hci_sus_state;
u8 RegIQKFWOffload;
struct submit_ctx iqk_sctx;
RT_AMPDU_BRUST AMPDUBurstMode; //92C maybe not use, but for compile successfully
u8 OutEpQueueSel;
u8 OutEpNumber;
#if defined (CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
//
// For SDIO Interface HAL related
//
//
// SDIO ISR Related
//
// u32 IntrMask[1];
// u32 IntrMaskToSet[1];
// LOG_INTERRUPT InterruptLog;
u32 sdio_himr;
u32 sdio_hisr;
//
// SDIO Tx FIFO related.
//
// HIQ, MID, LOW, PUB free pages; padapter->xmitpriv.free_txpg
u8 SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE];
_lock SdioTxFIFOFreePageLock;
u8 SdioTxOQTMaxFreeSpace;
u8 SdioTxOQTFreeSpace;
//
// SDIO Rx FIFO related.
//
u8 SdioRxFIFOCnt;
u16 SdioRxFIFOSize;
u32 sdio_tx_max_len[SDIO_MAX_TX_QUEUE];// H, N, L, used for sdio tx aggregation max length per queue
#endif //CONFIG_SDIO_HCI
#ifdef CONFIG_USB_HCI
// 2010/12/10 MH Add for USB aggreation mode dynamic shceme.
BOOLEAN UsbRxHighSpeedMode;
BOOLEAN UsbTxVeryHighSpeedMode;
u32 UsbBulkOutSize;
BOOLEAN bSupportUSB3;
// Interrupt relatd register information.
u32 IntArray[3];//HISR0,HISR1,HSISR
u32 IntrMask[3];
u8 C2hArray[16];
#ifdef CONFIG_USB_TX_AGGREGATION
u8 UsbTxAggMode;
u8 UsbTxAggDescNum;
#endif // CONFIG_USB_TX_AGGREGATION
#ifdef CONFIG_USB_RX_AGGREGATION
u16 HwRxPageSize; // Hardware setting
u32 MaxUsbRxAggBlock;
USB_RX_AGG_MODE UsbRxAggMode;
u8 UsbRxAggBlockCount; /* FOR USB Mode, USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed */
u8 UsbRxAggBlockTimeout;
u8 UsbRxAggPageCount; /* FOR DMA Mode, 8192C DMA page count*/
u8 UsbRxAggPageTimeout;
u8 RegAcUsbDmaSize;
u8 RegAcUsbDmaTime;
#endif//CONFIG_USB_RX_AGGREGATION
#endif //CONFIG_USB_HCI
#ifdef CONFIG_PCI_HCI
//
// EEPROM setting.
//
u32 TransmitConfig;
u32 IntrMaskToSet[2];
u32 IntArray[2];
u32 IntrMask[2];
u32 SysIntArray[1];
u32 SysIntrMask[1];
u32 IntrMaskReg[2];
u32 IntrMaskDefault[2];
BOOLEAN bL1OffSupport;
BOOLEAN bSupportBackDoor;
u8 bDefaultAntenna;
u8 bInterruptMigration;
u8 bDisableTxInt;
u16 RxTag;
#endif //CONFIG_PCI_HCI
#ifdef DBG_CONFIG_ERROR_DETECT
struct sreset_priv srestpriv;
#endif //#ifdef DBG_CONFIG_ERROR_DETECT
#ifdef CONFIG_BT_COEXIST
// For bluetooth co-existance
BT_COEXIST bt_coexist;
#endif // CONFIG_BT_COEXIST
#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B) || defined(CONFIG_RTL8188F)
#ifndef CONFIG_PCI_HCI // mutual exclusive with PCI -- so they're SDIO and GSPI
// Interrupt relatd register information.
u32 SysIntrStatus;
u32 SysIntrMask;
#endif
#endif /*endif CONFIG_RTL8723B */
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
char para_file_buf[MAX_PARA_FILE_BUF_LEN];
char *mac_reg;
u32 mac_reg_len;
char *bb_phy_reg;
u32 bb_phy_reg_len;
char *bb_agc_tab;
u32 bb_agc_tab_len;
char *bb_phy_reg_pg;
u32 bb_phy_reg_pg_len;
char *bb_phy_reg_mp;
u32 bb_phy_reg_mp_len;
char *rf_radio_a;
u32 rf_radio_a_len;
char *rf_radio_b;
u32 rf_radio_b_len;
char *rf_tx_pwr_track;
u32 rf_tx_pwr_track_len;
char *rf_tx_pwr_lmt;
u32 rf_tx_pwr_lmt_len;
#endif
#ifdef CONFIG_BACKGROUND_NOISE_MONITOR
s16 noise[ODM_MAX_CHANNEL_NUM];
#endif
struct hal_spec_t hal_spec;
u8 RfKFreeEnable;
u8 RfKFree_ch_group;
BOOLEAN bCCKinCH14;
BB_INIT_REGISTER RegForRecover[5];
} HAL_DATA_COMMON, *PHAL_DATA_COMMON;
typedef struct hal_com_data HAL_DATA_TYPE, *PHAL_DATA_TYPE;
#define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)((__pAdapter)->HalData))
#define GET_HAL_SPEC(__pAdapter) (&(GET_HAL_DATA((__pAdapter))->hal_spec))
#define GET_HAL_RFPATH_NUM(__pAdapter) (((HAL_DATA_TYPE *)((__pAdapter)->HalData))->NumTotalRFPath )
#define RT_GetInterfaceSelection(_Adapter) (GET_HAL_DATA(_Adapter)->InterfaceSel)
#define GET_RF_TYPE(__pAdapter) (GET_HAL_DATA(__pAdapter)->rf_type)
#define GET_KFREE_DATA(_adapter) (&(GET_HAL_DATA((_adapter))->kfree_data))
#define SUPPORT_HW_RADIO_DETECT(Adapter) ( RT_GetInterfaceSelection(Adapter) == INTF_SEL2_MINICARD ||\
RT_GetInterfaceSelection(Adapter) == INTF_SEL3_USB_Solo ||\
RT_GetInterfaceSelection(Adapter) == INTF_SEL4_USB_Combo)
#define get_hal_mac_addr(adapter) (GET_HAL_DATA(adapter)->EEPROMMACAddr)
#define is_boot_from_eeprom(adapter) (GET_HAL_DATA(adapter)->EepromOrEfuse)
#define rtw_get_hw_init_completed(adapter) (GET_HAL_DATA(adapter)->hw_init_completed)
#define rtw_is_hw_init_completed(adapter) (GET_HAL_DATA(adapter)->hw_init_completed == _TRUE)
#endif
#ifdef CONFIG_AUTO_CHNL_SEL_NHM
#define GET_ACS_STATE(padapter) (ATOMIC_READ(&GET_HAL_DATA(padapter)->acs.state))
#define SET_ACS_STATE(padapter, set_state) (ATOMIC_SET(&GET_HAL_DATA(padapter)->acs.state, set_state))
#define rtw_get_acs_channel(padapter) (GET_HAL_DATA(padapter)->acs.ch)
#define rtw_set_acs_channel(padapter, survey_ch) (GET_HAL_DATA(padapter)->acs.ch = survey_ch)
#endif /*CONFIG_AUTO_CHNL_SEL_NHM*/
#endif //__HAL_DATA_H__
View Git Blame Copy Permalink