1
0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2024-11-09 15:47:02 +00:00
rtl8812au/include/hal_com_phycfg.h
2017-04-15 11:46:31 +03:00

349 lines
8.2 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __HAL_COM_PHYCFG_H__
#define __HAL_COM_PHYCFG_H__
#define PathA 0x0 /* Useless */
#define PathB 0x1
#define PathC 0x2
#define PathD 0x3
typedef enum _RF_TX_NUM {
RF_1TX = 0,
RF_2TX,
RF_3TX,
RF_4TX,
RF_MAX_TX_NUM,
RF_TX_NUM_NONIMPLEMENT,
} RF_TX_NUM;
#define MAX_POWER_INDEX 0x3F
typedef enum _REGULATION_TXPWR_LMT {
TXPWR_LMT_FCC = 0,
TXPWR_LMT_MKK = 1,
TXPWR_LMT_ETSI = 2,
TXPWR_LMT_WW = 3,
TXPWR_LMT_MAX_REGULATION_NUM = 4
} REGULATION_TXPWR_LMT;
#define TX_PWR_LMT_REF_VHT_FROM_HT BIT0
#define TX_PWR_LMT_REF_HT_FROM_VHT BIT1
/*------------------------------Define structure----------------------------*/
typedef struct _BB_REGISTER_DEFINITION {
u32 rfintfs; /* set software control: */
/* 0x870~0x877[8 bytes] */
u32 rfintfo; /* output data: */
/* 0x860~0x86f [16 bytes] */
u32 rfintfe; /* output enable: */
/* 0x860~0x86f [16 bytes] */
u32 rf3wireOffset; /* LSSI data: */
/* 0x840~0x84f [16 bytes] */
u32 rfHSSIPara2; /* wire parameter control2 : */
/* 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes] */
u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
/* 0x8a0~0x8af [16 bytes] */
u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for Path A and B */
} BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
/* ---------------------------------------------------------------------- */
u8
PHY_GetTxPowerByRateBase(
IN PADAPTER Adapter,
IN u8 Band,
IN u8 RfPath,
IN u8 TxNum,
IN RATE_SECTION RateSection
);
VOID
PHY_GetRateValuesOfTxPowerByRate(
IN PADAPTER pAdapter,
IN u32 RegAddr,
IN u32 BitMask,
IN u32 Value,
OUT u8 *Rate,
OUT s8 *PwrByRateVal,
OUT u8 *RateNum
);
u8
PHY_GetRateIndexOfTxPowerByRate(
IN u8 Rate
);
VOID
PHY_SetTxPowerIndexByRateSection(
IN PADAPTER pAdapter,
IN u8 RFPath,
IN u8 Channel,
IN u8 RateSection
);
s8
_PHY_GetTxPowerByRate(
IN PADAPTER pAdapter,
IN u8 Band,
IN u8 RFPath,
IN u8 TxNum,
IN u8 RateIndex
);
s8
PHY_GetTxPowerByRate(
IN PADAPTER pAdapter,
IN u8 Band,
IN u8 RFPath,
IN u8 TxNum,
IN u8 RateIndex
);
#ifdef CONFIG_PHYDM_POWERTRACK_BY_TSSI
s8
PHY_GetTxPowerByRateOriginal(
IN PADAPTER pAdapter,
IN u8 Band,
IN u8 RFPath,
IN u8 TxNum,
IN u8 Rate
);
#endif
VOID
PHY_SetTxPowerByRate(
IN PADAPTER pAdapter,
IN u8 Band,
IN u8 RFPath,
IN u8 TxNum,
IN u8 Rate,
IN s8 Value
);
VOID
PHY_SetTxPowerLevelByPath(
IN PADAPTER Adapter,
IN u8 channel,
IN u8 path
);
VOID
PHY_SetTxPowerIndexByRateArray(
IN PADAPTER pAdapter,
IN u8 RFPath,
IN CHANNEL_WIDTH BandWidth,
IN u8 Channel,
IN u8 *Rates,
IN u8 RateArraySize
);
VOID
PHY_InitTxPowerByRate(
IN PADAPTER pAdapter
);
VOID
PHY_StoreTxPowerByRate(
IN PADAPTER pAdapter,
IN u32 Band,
IN u32 RfPath,
IN u32 TxNum,
IN u32 RegAddr,
IN u32 BitMask,
IN u32 Data
);
VOID
PHY_TxPowerByRateConfiguration(
IN PADAPTER pAdapter
);
u8
PHY_GetTxPowerIndexBase(
IN PADAPTER pAdapter,
IN u8 RFPath,
IN u8 Rate,
IN CHANNEL_WIDTH BandWidth,
IN u8 Channel,
OUT PBOOLEAN bIn24G
);
s8
PHY_GetTxPowerLimit(
IN PADAPTER Adapter,
IN u32 RegPwrTblSel,
IN BAND_TYPE Band,
IN CHANNEL_WIDTH Bandwidth,
IN u8 RfPath,
IN u8 DataRate,
IN u8 Channel
);
s8
PHY_GetTxPowerLimit_no_sc(
IN PADAPTER Adapter,
IN u32 RegPwrTblSel,
IN BAND_TYPE Band,
IN CHANNEL_WIDTH Bandwidth,
IN u8 RfPath,
IN u8 DataRate,
IN u8 Channel
);
#ifdef CONFIG_PHYDM_POWERTRACK_BY_TSSI
s8
PHY_GetTxPowerLimitOriginal(
IN PADAPTER Adapter,
IN u32 RegPwrTblSel,
IN BAND_TYPE Band,
IN CHANNEL_WIDTH Bandwidth,
IN u8 RfPath,
IN u8 DataRate,
IN u8 Channel
);
#endif
VOID
PHY_ConvertTxPowerLimitToPowerIndex(
IN PADAPTER Adapter
);
VOID
PHY_InitTxPowerLimit(
IN PADAPTER Adapter
);
s8
PHY_GetTxPowerTrackingOffset(
PADAPTER pAdapter,
u8 Rate,
u8 RFPath
);
struct txpwr_idx_comp {
u8 base;
s8 by_rate;
s8 limit;
s8 tpt;
s8 ebias;
};
u8
PHY_GetTxPowerIndex(
IN PADAPTER pAdapter,
IN u8 RFPath,
IN u8 Rate,
IN CHANNEL_WIDTH BandWidth,
IN u8 Channel
);
VOID
PHY_SetTxPowerIndex(
IN PADAPTER pAdapter,
IN u32 PowerIndex,
IN u8 RFPath,
IN u8 Rate
);
void dump_tx_power_idx_title(void *sel, _adapter *adapter);
void dump_tx_power_idx_by_path_rs(void *sel, _adapter *adapter, u8 rfpath, u8 rs);
void dump_tx_power_idx(void *sel, _adapter *adapter);
bool phy_is_tx_power_limit_needed(_adapter *adapter);
bool phy_is_tx_power_by_rate_needed(_adapter *adapter);
int phy_load_tx_power_by_rate(_adapter *adapter, u8 chk_file);
int phy_load_tx_power_limit(_adapter *adapter, u8 chk_file);
void phy_load_tx_power_ext_info(_adapter *adapter, u8 chk_file);
void phy_reload_tx_power_ext_info(_adapter *adapter);
void phy_reload_default_tx_power_ext_info(_adapter *adapter);
const struct map_t *hal_pg_txpwr_def_info(_adapter *adapter);
void dump_pg_txpwr_info_2g(void *sel, TxPowerInfo24G *txpwr_info, u8 rfpath_num, u8 max_tx_cnt);
void dump_pg_txpwr_info_5g(void *sel, TxPowerInfo5G *txpwr_info, u8 rfpath_num, u8 max_tx_cnt);
void dump_hal_txpwr_info_2g(void *sel, _adapter *adapter, u8 rfpath_num, u8 max_tx_cnt);
void dump_hal_txpwr_info_5g(void *sel, _adapter *adapter, u8 rfpath_num, u8 max_tx_cnt);
void hal_load_txpwr_info(
_adapter *adapter,
TxPowerInfo24G *pwr_info_2g,
TxPowerInfo5G *pwr_info_5g,
u8 *pg_data
);
void dump_tx_power_ext_info(void *sel, _adapter *adapter);
void dump_target_tx_power(void *sel, _adapter *adapter);
void dump_tx_power_by_rate(void *sel, _adapter *adapter);
void dump_tx_power_limit(void *sel, _adapter *adapter);
int rtw_get_phy_file_path(_adapter *adapter, const char *file_name);
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
#define MAC_FILE_FW_NIC "FW_NIC.bin"
#define MAC_FILE_FW_WW_IMG "FW_WoWLAN.bin"
#define PHY_FILE_MAC_REG "MAC_REG.txt"
#define PHY_FILE_AGC_TAB "AGC_TAB.txt"
#define PHY_FILE_PHY_REG "PHY_REG.txt"
#define PHY_FILE_PHY_REG_MP "PHY_REG_MP.txt"
#define PHY_FILE_PHY_REG_PG "PHY_REG_PG.txt"
#define PHY_FILE_RADIO_A "RadioA.txt"
#define PHY_FILE_RADIO_B "RadioB.txt"
#define PHY_FILE_RADIO_C "RadioC.txt"
#define PHY_FILE_RADIO_D "RadioD.txt"
#define PHY_FILE_TXPWR_TRACK "TxPowerTrack.txt"
#define PHY_FILE_TXPWR_LMT "TXPWR_LMT.txt"
#define PHY_FILE_WIFI_ANT_ISOLATION "wifi_ant_isolation.txt"
#define MAX_PARA_FILE_BUF_LEN 25600
#define LOAD_MAC_PARA_FILE BIT0
#define LOAD_BB_PARA_FILE BIT1
#define LOAD_BB_PG_PARA_FILE BIT2
#define LOAD_BB_MP_PARA_FILE BIT3
#define LOAD_RF_PARA_FILE BIT4
#define LOAD_RF_TXPWR_TRACK_PARA_FILE BIT5
#define LOAD_RF_TXPWR_LMT_PARA_FILE BIT6
int phy_ConfigMACWithParaFile(IN PADAPTER Adapter, IN char *pFileName);
int phy_ConfigBBWithParaFile(IN PADAPTER Adapter, IN char *pFileName, IN u32 ConfigType);
int phy_ConfigBBWithPgParaFile(IN PADAPTER Adapter, IN const char *pFileName);
int phy_ConfigBBWithMpParaFile(IN PADAPTER Adapter, IN char *pFileName);
int PHY_ConfigRFWithParaFile(IN PADAPTER Adapter, IN char *pFileName, IN u8 eRFPath);
int PHY_ConfigRFWithTxPwrTrackParaFile(IN PADAPTER Adapter, IN char *pFileName);
int PHY_ConfigRFWithPowerLimitTableParaFile(IN PADAPTER Adapter, IN const char *pFileName);
void phy_free_filebuf_mask(_adapter *padapter, u8 mask);
void phy_free_filebuf(_adapter *padapter);
#endif /* CONFIG_LOAD_PHY_PARA_FROM_FILE */
#endif /* __HAL_COMMON_H__ */