mirrors/rtl8812au
1
0
Fork 0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2024-11-08 20:25:11 +00:00
Code Releases Activity
6b6f1347dc
rtl8812au/include/rtl_autoconf.h

364 lines
9.5 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
/* ***** temporarily flag ******* */
#define CONFIG_SINGLE_IMG
/* #define CONFIG_DISABLE_ODM */
/* ***** temporarily flag ******* */
/*
* Public General Config
*/
#define AUTOCONF_INCLUDED
#define RTL871X_MODULE_NAME "8812AU"
/*
#ifndef DRV_NAME
#define DRV_NAME "rtl8812au"
#endif
*/
#define CONFIG_USB_HCI
#define PLATFORM_LINUX
#ifdef CONFIG_IOCTL_CFG80211
/* #define RTW_USE_CFG80211_STA_EVENT */ /* Indecate new sta asoc through cfg80211_new_sta */
#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
/* #define CONFIG_DEBUG_CFG80211 */
/* #define CONFIG_DRV_ISSUE_PROV_REQ */ /* IOT FOR S2 */
#define CONFIG_SET_SCAN_DENY_TIMER
#endif
/*
* Internal General Config
*/
/* #define CONFIG_H2CLBK */
#define CONFIG_EMBEDDED_FWIMG 1
#if (CONFIG_EMBEDDED_FWIMG==1)
#define LOAD_FW_HEADER_FROM_DRIVER
#endif
/* #define CONFIG_FILE_FWIMG */
#define CONFIG_XMIT_ACK
#ifdef CONFIG_XMIT_ACK
//#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif
#define CONFIG_80211N_HT
#define CONFIG_80211AC_VHT
#ifdef CONFIG_80211AC_VHT
#ifndef CONFIG_80211N_HT
#define CONFIG_80211N_HT
#endif
#endif
#ifdef CONFIG_80211AC_VHT
#define CONFIG_BEAMFORMING
#ifdef CONFIG_BEAMFORMING
#define CONFIG_BEAMFORMER_FW_NDPA
#define CONFIG_PHYDM_BEAMFORMING
#ifdef CONFIG_PHYDM_BEAMFORMING
#define BEAMFORMING_SUPPORT 1 /*for phydm beamforming*/
#define SUPPORT_MU_BF 0
#else
#define BEAMFORMING_SUPPORT 0 /*for driver beamforming*/
#endif
#endif
#endif
#define CONFIG_RECV_REORDERING_CTRL 1
#define CONFIG_DFS 0
/* #define CONFIG_SUPPORT_USB_INT */
#ifdef CONFIG_SUPPORT_USB_INT
/* #define CONFIG_USB_INTERRUPT_IN_PIPE 1 */
#endif
#ifdef CONFIG_POWER_SAVING
#define CONFIG_IPS 1
#ifdef CONFIG_IPS
/* #define CONFIG_IPS_LEVEL_2 1 */ /* enable this to set default IPS mode to IPS_LEVEL_2 */
#define CONFIG_IPS_CHECK_IN_WD /* Do IPS Check in WatchDog. */
#ifdef CONFIG_PNO_SUPPORT
#define CONFIG_FWLPS_IN_IPS /* issue H2C command to let FW do LPS when entering IPS */
#endif /* CONFIG_PNO_SUPPORT */
#endif
/* #define SUPPORT_HW_RFOFF_DETECTED 1 */
#define CONFIG_LPS 1
#if defined(CONFIG_LPS)
/* #define CONFIG_LPS_LCLK 1 */
#endif
#ifdef CONFIG_LPS_LCLK
#ifdef CONFIG_POWER_SAVING
/* #define CONFIG_XMIT_THREAD_MODE */
#endif /* CONFIG_POWER_SAVING */
#ifndef CONFIG_SUPPORT_USB_INT
#define LPS_RPWM_WAIT_MS 300
#define CONFIG_DETECT_CPWM_BY_POLLING
#endif /* !CONFIG_SUPPORT_USB_INT */
/* #define DBG_CHECK_FW_PS_STATE */
#endif /* CONFIG_LPS_LCLK */
#endif /*CONFIG_POWER_SAVING*/
/*#define CONFIG_ANTENNA_DIVERSITY*/
/* #define CONFIG_CONCURRENT_MODE 1 */
#ifdef CONFIG_CONCURRENT_MODE
#define CONFIG_RUNTIME_PORT_SWITCH
/* #define DBG_RUNTIME_PORT_SWITCH */
/* #ifdef CONFIG_RTL8812A */
/* #define CONFIG_TSF_RESET_OFFLOAD 1 */ /* For 2 PORT TSF SYNC. */
/* #endif */
#endif
/* #else */ /* #ifndef CONFIG_MP_INCLUDED */
/* #endif */ /* #ifndef CONFIG_MP_INCLUDED */
#define CONFIG_AP_MODE 1
#ifdef CONFIG_AP_MODE
/* #define CONFIG_INTERRUPT_BASED_TXBCN */ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */
#if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
#undef CONFIG_INTERRUPT_BASED_TXBCN
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN
/* #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT */
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#endif
#define CONFIG_NATIVEAP_MLME
#ifndef CONFIG_NATIVEAP_MLME
#define CONFIG_HOSTAPD_MLME 1
#endif
#define CONFIG_FIND_BEST_CHANNEL 1
#endif
#define CONFIG_P2P 1
#ifdef CONFIG_P2P
/* The CONFIG_WFD is for supporting the Wi-Fi display */
#define CONFIG_WFD
#define CONFIG_P2P_REMOVE_GROUP_INFO
/* #define CONFIG_DBG_P2P */
#define CONFIG_P2P_PS
#define CONFIG_P2P_OP_CHK_SOCIAL_CH
#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */
/*#define CONFIG_P2P_INVITE_IOT*/
#endif
/* Added by Kurt 20110511 */
#ifdef CONFIG_TDLS
#define CONFIG_TDLS_DRIVER_SETUP
/* #ifndef CONFIG_WFD */
/* #define CONFIG_WFD */
/* #endif */
/* #define CONFIG_TDLS_AUTOSETUP */
#define CONFIG_TDLS_AUTOCHECKALIVE
#define CONFIG_TDLS_CH_SW /* Enable this flag only when we confirm that TDLS CH SW is supported in FW */
#endif
#define CONFIG_SKB_COPY 1 /* for amsdu */
#define CONFIG_RTW_LED
#ifdef CONFIG_RTW_LED
#define CONFIG_RTW_SW_LED
#ifdef CONFIG_RTW_SW_LED
/* #define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */
#endif
#endif /* CONFIG_RTW_LED */
#define CONFIG_GLOBAL_UI_PID
#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME
/* #define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */
/* #define CONFIG_RESUME_IN_WORKQUEUE */
/* #define CONFIG_SET_SCAN_DENY_TIMER */
#define CONFIG_LONG_DELAY_ISSUE
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
/* #define CONFIG_SIGNAL_DISPLAY_DBM */ /* display RX signal with dbm */
#ifdef CONFIG_SIGNAL_DISPLAY_DBM
/* #define CONFIG_BACKGROUND_NOISE_MONITOR */
#endif
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
#define CONFIG_TX_MCAST2UNI /*Support IP multicast->unicast*/
/* #define CONFIG_CHECK_AC_LIFETIME 1 */ /* Check packet lifetime of 4 ACs. */
/*
* Interface Related Config
*/
#ifndef CONFIG_MINIMAL_MEMORY_USAGE
#define CONFIG_USB_TX_AGGREGATION 1
#define CONFIG_USB_RX_AGGREGATION 1
#endif
/* #define CONFIG_REDUCE_USB_TX_INT 1 */ /* Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. */
/* #define CONFIG_EASY_REPLACEMENT 1 */
/*
* CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
*/
/* #define CONFIG_USE_USB_BUFFER_ALLOC_TX 1 */ /* Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. */
/* #define CONFIG_USE_USB_BUFFER_ALLOC_RX 1 */ /* For RX path */
#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
#else
#define CONFIG_PREALLOC_RECV_SKB
#ifdef CONFIG_PREALLOC_RECV_SKB
/* #define CONFIG_FIX_NR_BULKIN_BUFFER */ /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */
#endif
#endif
/*
* USB VENDOR REQ BUFFER ALLOCATION METHOD
* if not set we'll use function local variable (stack memory)
*/
/* #define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE */
#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
#define CONFIG_USB_VENDOR_REQ_MUTEX
#define CONFIG_VENDOR_REQ_RETRY
/* #define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ 1 */
#ifdef CONFIG_WOWLAN
#define CONFIG_GTK_OL
/* #define CONFIG_ARP_KEEP_ALIVE */
#endif /* CONFIG_WOWLAN */
#ifdef CONFIG_GPIO_WAKEUP
#ifndef WAKEUP_GPIO_IDX
#define WAKEUP_GPIO_IDX 1 /* WIFI Chip Side */
#endif /* !WAKEUP_GPIO_IDX */
#endif /* CONFIG_GPIO_WAKEUP */
/*
* HAL Related Config
*/
#define RTL8812A_RX_PACKET_INCLUDE_CRC 0
#define CONFIG_RX_PACKET_APPEND_FCS
/* #define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0 */
#define CONFIG_OUT_EP_WIFI_MODE 0
#define ENABLE_USB_DROP_INCORRECT_OUT
#define CONFIG_ADHOC_WORKAROUND_SETTING 1
#define ENABLE_NEW_RFE_TYPE 0
#define DISABLE_BB_RF 0
#ifdef CONFIG_MP_INCLUDED
#define MP_DRIVER 1
#define CONFIG_MP_IWPRIV_SUPPORT 1
/* #undef CONFIG_USB_TX_AGGREGATION */
/* #undef CONFIG_USB_RX_AGGREGATION */
#else
#define MP_DRIVER 0
#endif
/*
* Platform Related Config
*/
#if defined(CONFIG_PLATFORM_ACTIONS_ATM702X)
#ifdef CONFIG_USB_TX_AGGREGATION
#undef CONFIG_USB_TX_AGGREGATION
#endif
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
#define CONFIG_USE_USB_BUFFER_ALLOC_TX
#endif
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX
#define CONFIG_USE_USB_BUFFER_ALLOC_RX
#endif
#endif
#ifdef CONFIG_BT_COEXIST
/* for ODM and outsrc BT-Coex */
#define CONFIG_BT_COEXIST_SOCKET_TRX
#ifndef CONFIG_LPS
#define CONFIG_LPS /* download reserved page to FW */
#endif
#endif /* !CONFIG_BT_COEXIST */
#ifdef CONFIG_USB_TX_AGGREGATION
/* #define CONFIG_TX_EARLY_MODE */
#endif
#define RTL8188E_EARLY_MODE_PKT_NUM_10 0
/*
* Debug Related Config
*/
#define DBG 0
#define CONFIG_PROC_DEBUG
#define DBG_CONFIG_ERROR_DETECT
/* #define DBG_CONFIG_ERROR_DETECT_INT */
/* #define DBG_CONFIG_ERROR_RESET */
/* #define DBG_IO */
/* #define DBG_DELAY_OS */
/* #define DBG_MEM_ALLOC */
/* #define DBG_IOCTL */
/* #define DBG_TX */
/* #define DBG_XMIT_BUF */
/* #define DBG_XMIT_BUF_EXT */
/* #define DBG_TX_DROP_FRAME */
/* #define DBG_RX_DROP_FRAME */
/* #define DBG_RX_SEQ */
/* #define DBG_RX_SIGNAL_DISPLAY_PROCESSING */
/* #define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap" */
#define DBG_TX_POWER_IDX 1
#define DBG_PG_TXPWR_READ 1
#define DBG_HIGHEST_RATE_BMP_BW_CHANGE 1
/* #define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE */
/* #define DBG_ROAMING_TEST */
/* #define DBG_HAL_INIT_PROFILING */
/*#define DBG_MEMORY_LEAK*/
#define DBG_RX_DFRAME_RAW_DATA
/*#define CONFIG_USE_EXTERNAL_POWER */ /* NOT USB2.0 power, so no 500mA power constraint, no limitation in Power by Rate*/
/*#define DBG_FW_DEBUG_MSG_PKT*/ /* FW use this feature to tx debug broadcast pkt. This pkt include FW debug message*/
View Git Blame Copy Permalink