Fix DKMS to include 8814au chipset

Makefile

@@ -39,7 +39,7 @@ CONFIG_RTL8812A = y
 CONFIG_RTL8821A = y
 CONFIG_RTL8192E = n
 CONFIG_RTL8723B = n
-CONFIG_RTL8814A = y
+CONFIG_RTL8814A = n
 CONFIG_RTL8723C = n
 CONFIG_RTL8188F = n
 CONFIG_RTL8822B = n
@@ -196,17 +196,11 @@ ifeq ($(CONFIG_PCI_HCI), y)
 HCI_NAME = pci
 endif
 
-#ifeq ($(RTL8814), 1)
+ifeq ($(RTL8814), 1)
-#CONFIG_RTL8812A = n
+CONFIG_RTL8812A = y
-#CONFIG_RTL8821A = n
+CONFIG_RTL8821A = y
-#CONFIG_RTL8814A = y
+CONFIG_RTL8814A = y
-#endif
+endif
-
-#ifeq ($(RTL8821), 1)
-#CONFIG_RTL8812A = y
-#CONFIG_RTL8821A = y
-#CONFIG_RTL8814A = n
-#endif
 
 ifeq ($(CONFIG_USB2_EXTERNAL_POWER), y)
 EXTRA_CFLAGS += -DCONFIG_USE_EXTERNAL_POWER

README.md

@@ -1,30 +1,37 @@
-# rtl8812au
+# RTL8812AU/21AU and RTL8814AU drivers
+# with monitor mode and frame injection
 
-## Realtek 8812AU driver v5.2.20.2 with monitor mode and frame injection
+## DKMS
-
+This driver can be installed using [DKMS]. This is a system which will automatically recompile and install a kernel module when a new kernel gets installed or updated. To make use of DKMS, install the `dkms` package, which on Debian (based) systems is done like this:
-This driver supports 8812au / 8821au and 8814au chipsets.
-
-### Building / Installing
-
-To build and install module manually:
 ```
-$ sudo make
+sudo apt install dkms
-$ sudo make install
 ```
 
-To use DKMS install:
+## Installation of Driver
-
+In order to install the driver open a terminal in the directory with the source code and execute the following command:
 ```
-$ sudo ./dkms-install.sh
+sudo ./dkms-install.sh
 ```
 
-To use DKMS uninstall and remove:
+## Removal of Driver
-
+In order to remove the driver from your system open a terminal in the directory with the source code and execute the following command:
 ```
-$ sudo ./dkms-remove.sh
+sudo ./dkms-remove.sh
 ```
 
-### Notes
+## Make
+For building & installing the rtl8812au/rtl8821au driver with 'make' use
+```
+make
+make install
+```
+and for building & installing the rtl8814au driver with 'make' use
+```
+make RTL8814=1
+make install RTL8814=1
+```
+
+## Notes
 Download
 ```
 git clone -b v5.2.20 https://github.com/aircrack-ng/rtl8812au.git
@@ -35,72 +42,45 @@ Package / Build dependencies (Kali)
 sudo apt-get install build-essential
 sudo apt-get install bc
 sudo apt-get install libelf-dev
-sudo apt-get install dkms
 sudo apt-get install linux-headers-`uname -r`
 ```
-Building for  Raspberry (RPI) also needs
+For Raspberry (RPI)
 ```
 sudo apt install raspberrypi-kernel-headers
 ```
-
+For setting monitor mode
-### For setting monitor mode
+  1. Fix problematic interference in monitor mode. 
-1. Fix problematic interference in monitor mode. 
+  ```
+  airmon-ng check kill
+  ```
+  You may also uncheck the box "Automatically connect to this network when it is avaiable" in nm-connection-editor. This only works if you have a saved wifi connection.
+  
+  2. Set interface down
+  ```
+  sudo ip link set wlan0 down
+  ``` 
+  3. Set monitor mode
+  ```
+  sudo iw dev wlan0 set type monitor
+  ```
+  4. Set interface up
+  ```
+  sudo ip link set wlan0 up
+  ```
+For setting TX power
 ```
-airmon-ng check kill
+sudo iw wlan0 set txpower fixed 3000
-```
-You may also uncheck the box "Automatically connect to this network when it is avaiable" in nm-connection-editor. This only works if you have a saved wifi connection.
-
-2. Set interface down
-```
-sudo ip link set wlan0 down
-``` 
-3. Set monitor mode
-```
-sudo iw dev wlan0 set type monitor
-```
-4. Set interface up
-```
-sudo ip link set wlan0 up
 ```
 
-### TX Power Control
+## LED Parameter
-
-The txpower may be adjusted with these commands
-```
-ifconfig <adapter> down
-iwconfig <adapter> txpower 30
 ```
+We've added the "realtek-leds.conf" in build directory, 
+with this you may change the leds to 
+"2: Allways On", "1: Normal" or "0: Allways Off" with placing the file in "/etc/modprobe.d/
 
-### LED control
+Manual modprobe will override this file if option value also included at the command line, e.g.,
-
+$ sudo modprobe -r 8812au
-#### You can now control LED behaviour statically by Makefile, for example:
+$ sudo modprobe 8812au rtw_led_ctrl=1
-
-```sh
-CONFIG_LED_ENABLE = n
-```
-value can be y or n
-
-#### statically by module parameter in /etc/modprobe.d/8812au.conf or wherever, for example:
-
-```sh
-options 8812au rtw_led_enable=0
-```
-value can be 0 or 1
-
-#### or dynamically by writing to /proc/net/rtl8812au/$(your interface name)/led_enable, for example:
-
-```sh
-$ echo "0" > /proc/net/rtl8812au/$(your interface name)/led_enable
-```
-value can be 0 or 1
-
-#### check current value:
-
-```sh
-$ cat /proc/net/rtl8812au/$(your interface name)/led_enable
-```
-
-### NetworkManager
 
 Newer versions of NetworkManager switches to random MAC address. Some users would prefer to use a fixed address. 
 Simply add these lines below
@@ -111,3 +91,4 @@ wifi.scan-rand-mac-address=no
 at the end of file /etc/NetworkManager/NetworkManager.conf and restart NetworkManager with the command:
 ```
 sudo service NetworkManager restart
+```

dkms.conf

@@ -1,10 +1,11 @@
 PACKAGE_NAME="realtek-rtl88xxau"
 PACKAGE_VERSION="5.2.20.2~20180804"
-BUILT_MODULE_NAME[0]="8812au"
+CLEAN="make clean"
+BUILT_MODULE_NAME[0]=8812au
 PROCS_NUM=`nproc`
 [ $PROCS_NUM -gt 16 ] && PROCS_NUM=16
-MAKE="'make' -j$PROCS_NUM KVER=${kernelver} KSRC=/lib/modules/${kernelver}/build"
-CLEAN="'make' clean"
 DEST_MODULE_LOCATION[0]="/updates"
+MAKE[0]="'make' -j$PROCS_NUM KVER=${kernelver} && 'make' -j$PROCS_NUM RTL8814=1 KVER=${kernelver}"
+BUILT_MODULE_NAME[1]=8814au
+DEST_MODULE_LOCATION[1]="/updates"
 AUTOINSTALL="yes"
-REMAKE_INITRD=no