mirrors/rtl8812au
1
0
Fork 0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2024-11-26 07:04:12 +00:00
Code Releases Activity

Code cleanup + more debug ++

Browse Source
This commit is contained in:
kimocoder 2018-02-16 22:40:26 +01:00
parent 605ecfa886
commit b8e3b80e4f
22 changed files with 304 additions and 1015 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Makefile
View File

@ -86,7 +86,7 @@ CONFIG_HIGH_ACTIVE = n
CONFIG_PNO_SUPPORT = n
CONFIG_PNO_SET_DEBUG = n
CONFIG_AP_WOWLAN = n
######### Notify SDIO Host Keep Power During Syspend ##########
######### Notify SDIO Host Keep Power During Suspend ##########
CONFIG_RTW_SDIO_PM_KEEP_POWER = y
###################### MP HW TX MODE FOR VHT #######################
CONFIG_MP_VHT_HW_TX_MODE = n
@ -175,12 +175,12 @@ CONFIG_RTL8814A = y
endif
ifeq ($(DEBUG), 1)
EXTRA_CFLAGS += -DDBG=1 -DCONFIG_RTW_DEBUG -DCONFIG_DBG_COUNTER -DRTW_LOG_LEVEL=5
EXTRA_CFLAGS += -DDBG=1 -DCONFIG_RTW_DEBUG -DCONFIG_DBG_COUNTER -DRTW_LOG_LEVEL=5
EXTRA_CFLAGS += -DCONFIG_RADIOTAP_WITH_RXDESC
else ifeq ($(DEBUG), 2)
EXTRA_CFLAGS += -DDBG=1 -DCONFIG_RTW_DEBUG -DCONFIG_DBG_COUNTER -DRTW_LOG_LEVEL=5
EXTRA_CFLAGS += -DCONFIG_DEBUG_RTL871X
EXTRA_CFLAGS += -DCONFIG_RADIOTAP_WITH_RXDESC
EXTRA_CFLAGS += -DCONFIG_DEBUG_RTL871X
EXTRA_CFLAGS += -DCONFIG_RADIOTAP_WITH_RXDESC
else
EXTRA_CFLAGS += -DDBG=0
endif
@ -226,7 +226,7 @@ _HAL_INTFS_FILES := hal/hal_intf.o \
hal/hal_hci/hal_$(HCI_NAME).o \
hal/led/hal_$(HCI_NAME)_led.o
_OUTSRC_FILES := hal/phydm/phydm_debug.o \
hal/phydm/phydm_antdiv.o\
hal/phydm/phydm_antdect.o\
@ -517,7 +517,7 @@ _OUTSRC_FILES += hal/phydm/rtl8821a/halhwimg8821a_fw.o\
hal/phydm/rtl8821a/phydm_rtl8821a.o\
hal/phydm/rtl8821a/phydm_iqk_8821a_ce.o\
hal/phydm/txbf/haltxbfjaguar.o
endif
endif
@ -609,7 +609,7 @@ _HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o
hal/$(RTL871X)/$(RTL871X)_cmd.o
# hal/$(RTL871X)/hal8814a_fw.o
@ -1837,7 +1837,7 @@ rtk_core := core/rtw_cmd.o \
core/rtw_btcoex.o \
core/rtw_beamforming.o \
core/rtw_odm.o \
core/efuse/rtw_efuse.o
core/efuse/rtw_efuse.o
ifeq ($(CONFIG_SDIO_HCI), y)
rtk_core += core/rtw_sdio.o

8
README.md
View File

@ -94,6 +94,10 @@ $ sudo modprobe 8812au rtw_led_ctrl=1
## Credits
```
astsam - for the main work + monitor/injection support - https://github.com/astsam
evilphish - for great patching (USB3, VHT + txpower control +++) - https://github.com/evilphish
astsam - for the main work + monitor/injection support - https://github.com/astsam
evilphish - for great patching (USB3, VHT + txpower control +++) - https://github.com/evilphish
jcard0na - for fixing the "sluggish" / broken injection - https://github.com/jcard0na
dpShaker - for adding support for pre-configured SeqNum (RadioTap)
CGarces - for providing kernel support patch (v4.15)
brimstone - for providing kernel support patch (v4.14)
```

7
hal/rtl8814a/rtl8814a_phycfg.c
View File

@ -554,7 +554,6 @@ PHY_ConfigBB_8814A(
}
//2 3.3 RF Config
s32
@ -1157,7 +1156,7 @@ PHY_GetTxPowerIndex_8814A(
tpt_offset = PHY_GetTxPowerTrackingOffset(pAdapter, RFPath, Rate);
powerDiffByRate = powerDiffByRate > limit ? limit : powerDiffByRate;
/*RTW_INFO("Rate-0x%x: (TxPower, PowerDiffByRate Path-%c) = (0x%X, %d)\n", Rate, ((RFPath==0)?'A':(RFPath==1)?'B':(RFPath==2)?'C':'D'), txPower, powerDiffByRate);*/
RTW_INFO("Rate-0x%x: (TxPower, PowerDiffByRate Path-%c) = (0x%X, %d)\n", Rate, ((RFPath==0)?'A':(RFPath==1)?'B':(RFPath==2)?'C':'D'), txPower, powerDiffByRate);
txPower += powerDiffByRate;
@ -1184,8 +1183,8 @@ PHY_GetTxPowerIndex_8814A(
//(pHalData->bautoload_fail_flag || pHalData->EfuseMap[EFUSE_INIT_MAP][EEPROM_TX_PWR_INX_JAGUAR] == 0xFF))
//txPower = 0x12;
/*RTW_INFO("Final Tx Power(RF-%c, Channel: %d) = %d(0x%X)\n", ((RFPath==0)?'A':(RFPath==1)?'B':(RFPath==2)?'C':'D'), Channel,
txPower, txPower);*/
RTW_INFO("Final Tx Power(RF-%c, Channel: %d) = %d(0x%X)\n", ((RFPath==0)?'A':(RFPath==1)?'B':(RFPath==2)?'C':'D'), Channel,
txPower, txPower);
return (u8) txPower;
}

2
hal/rtl8814a/rtl8814a_sreset.c
View File

@ -93,7 +93,7 @@ void rtl8814_sreset_linked_status_check(_adapter *padapter)
regc58 = rtw_read32(padapter,0xc58);
reg824 = rtw_read32(padapter,0x824);
reg800 = rtw_read32(padapter,0x800);
if( ((regc50&0xFFFFFF00)!= 0x69543400)||
if ( ((regc50&0xFFFFFF00)!= 0x69543400)||
((regc58&0xFFFFFF00)!= 0x69543400)||
(((reg824&0xFFFFFF00)!= 0x00390000)&&(((reg824&0xFFFFFF00)!= 0x80390000)))||
( ((reg800&0xFFFFFF00)!= 0x03040000)&&((reg800&0xFFFFFF00)!= 0x83040000)))

4
hal/rtl8814a/rtl8814a_xmit.c
View File

@ -172,7 +172,6 @@ InsertEMContent_8814(
}
void UpdateEarlyModeInfo8814(struct xmit_priv *pxmitpriv,struct xmit_buf *pxmitbuf )
{
//_adapter *padapter, struct xmit_frame *pxmitframe,struct tx_servq *ptxservq
@ -254,7 +253,6 @@ void rtl8814a_cal_txdesc_chksum(u8 *ptxdesc)
u32 index;
u16 checksum = 0;
usPtr = (u16*)ptxdesc;
// checksume is always calculated by first 32 bytes,
// and it doesn't depend on TX DESC length.
@ -439,7 +437,7 @@ BWMapping_8814(
else
BWSettingOfDesc = 0;
}
else if(pHalData->CurrentChannelBW== CHANNEL_WIDTH_40) {
else if (pHalData->CurrentChannelBW== CHANNEL_WIDTH_40) {
if ((pattrib->bwmode == CHANNEL_WIDTH_40) || (pattrib->bwmode == CHANNEL_WIDTH_80))
BWSettingOfDesc = 1;
else

18
hal/rtl8814a/usb/rtl8814au_xmit.c
View File

@ -61,7 +61,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bag
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
if (padapter->registrypriv.mp_mode == 0) {
if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt) &&(rtw_usb_bulk_size_boundary(padapter,TXDESC_SIZE+sz)==_FALSE)) {
if ((PACKET_OFFSET_SZ != 0) && (!bagg_pkt) &&(rtw_usb_bulk_size_boundary(padapter,TXDESC_SIZE+sz)==_FALSE)) {
ptxdesc = (pmem+PACKET_OFFSET_SZ);
//RTW_INFO("==> non-agg-pkt,shift pointer...\n");
pull = 1;
@ -94,10 +94,9 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bag
}
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
if (padapter->registrypriv.mp_mode == 0)
{
if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt)){
if((pull) && (pxmitframe->pkt_offset>0)) {
if (padapter->registrypriv.mp_mode == 0) {
if ((PACKET_OFFSET_SZ != 0) && (!bagg_pkt)) {
if ((pull) && (pxmitframe->pkt_offset>0)) {
pxmitframe->pkt_offset = pxmitframe->pkt_offset -1;
}
}
@ -130,8 +129,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bag
SET_TX_DESC_SEQ_8814A(ptxdesc, pattrib->seqnum);
}
if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
{
if ((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG) {
//RTW_INFO("pxmitframe->frame_tag == DATA_FRAMETAG\n");
rtl8814a_fill_txdesc_sectype(pattrib, ptxdesc);
@ -189,7 +187,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bag
if (padapter->fix_rate != 0xFF) { // modify data rate by iwpriv
SET_TX_DESC_USE_RATE_8814A(ptxdesc, 1);
DriverFixedRate = 0x01;
if(padapter->fix_rate & BIT(7))
if (padapter->fix_rate & BIT(7))
SET_TX_DESC_DATA_SHORT_8814A(ptxdesc, 1);
SET_TX_DESC_TX_RATE_8814A(ptxdesc, (padapter->fix_rate & 0x7F));
@ -202,7 +200,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bag
if (pattrib->stbc)
SET_TX_DESC_DATA_STBC_8814A(ptxdesc, 1);
//work arond before fixing RA
//work around before fixing RA
//SET_TX_DESC_USE_RATE_8814A(ptxdesc, 1);
//SET_TX_DESC_TX_RATE_8814A(ptxdesc, 0x10);
} else {
@ -253,7 +251,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bag
SET_TX_DESC_DATA_RETRY_LIMIT_8814A(ptxdesc, 5);
SET_TX_DESC_DISABLE_FB_8814A(ptxdesc, 1);
//if(pattrib->rts_cca)
//if (pattrib->rts_cca)
//{
// SET_TX_DESC_NDPA_8812(ptxdesc, 2);
//}

560
hal/rtl8814a/usb/usb_halinit.c
View File

File diff suppressed because it is too large Load Diff

50
hal/rtl8814a/usb/usb_ops_linux.c
View File

@ -1,7 +1,7 @@
/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
@ -24,17 +24,16 @@
#ifdef CONFIG_SUPPORT_USB_INT
void interrupt_handler_8814au(_adapter *padapter,u16 pkt_len,u8 *pbuf)
{
{
HAL_DATA_TYPE *pHalData=GET_HAL_DATA(padapter);
struct reportpwrstate_parm pwr_rpt;
if ( pkt_len != INTERRUPT_MSG_FORMAT_LEN )
{
if ( pkt_len != INTERRUPT_MSG_FORMAT_LEN ) {
RTW_INFO("%s Invalid interrupt content length (%d)!\n", __FUNCTION__, pkt_len);
return ;
}
// HISR
// HISR
_rtw_memcpy(&(pHalData->IntArray[0]), &(pbuf[USB_INTR_CONTENT_HISR_OFFSET]), 4);
_rtw_memcpy(&(pHalData->IntArray[1]), &(pbuf[USB_INTR_CONTENT_HISRE_OFFSET]), 4);
@ -42,25 +41,24 @@ void interrupt_handler_8814au(_adapter *padapter,u16 pkt_len,u8 *pbuf)
{
u32 hisr=0 ,hisr_ex=0;
_rtw_memcpy(&hisr,&(pHalData->IntArray[0]),4);
hisr = le32_to_cpu(hisr);
hisr = le32_to_cpu(hisr);
_rtw_memcpy(&hisr_ex,&(pHalData->IntArray[1]),4);
hisr_ex = le32_to_cpu(hisr_ex);
if((hisr != 0) || (hisr_ex!=0))
if ((hisr != 0) || (hisr_ex!=0))
RTW_INFO("===> %s hisr:0x%08x ,hisr_ex:0x%08x \n",__FUNCTION__,hisr,hisr_ex);
}
#endif
#ifdef CONFIG_LPS_LCLK
if( pHalData->IntArray[0] & IMR_CPWM_88E )
{
if ( pHalData->IntArray[0] & IMR_CPWM_88E ) {
_rtw_memcpy(&pwr_rpt.state, &(pbuf[USB_INTR_CONTENT_CPWM1_OFFSET]), 1);
//_rtw_memcpy(&pwr_rpt.state2, &(pbuf[USB_INTR_CONTENT_CPWM2_OFFSET]), 1);
//88e's cpwm value only change BIT0, so driver need to add PS_STATE_S2 for LPS flow.
pwr_rpt.state |= PS_STATE_S2;
//88e's cpwm value only change BIT0, so driver need to add PS_STATE_S2 for LPS flow.
pwr_rpt.state |= PS_STATE_S2;
_set_workitem(&(adapter_to_pwrctl(padapter)->cpwm_event));
}
#endif//CONFIG_LPS_LCLK
@ -72,40 +70,38 @@ void interrupt_handler_8814au(_adapter *padapter,u16 pkt_len,u8 *pbuf)
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
if (pHalData->IntArray[0] & (IMR_TBDER_88E|IMR_TBDOK_88E))
#endif
{
#endif
{
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
#if 0
if(pHalData->IntArray[0] & IMR_BCNDMAINT0_88E)
if (pHalData->IntArray[0] & IMR_BCNDMAINT0_88E)
RTW_INFO("%s: HISR_BCNERLY_INT\n", __func__);
if(pHalData->IntArray[0] & IMR_TBDOK_88E)
if (pHalData->IntArray[0] & IMR_TBDOK_88E)
RTW_INFO("%s: HISR_TXBCNOK\n", __func__);
if(pHalData->IntArray[0] & IMR_TBDER_88E)
if (pHalData->IntArray[0] & IMR_TBDER_88E)
RTW_INFO("%s: HISR_TXBCNERR\n", __func__);
#endif
if(check_fwstate(pmlmepriv, WIFI_AP_STATE))
{
if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
//send_beacon(padapter);
if(pmlmepriv->update_bcn == _TRUE)
if (pmlmepriv->update_bcn == _TRUE)
{
//tx_beacon_hdl(padapter, NULL);
set_tx_beacon_cmd(padapter);
}
}
#ifdef CONFIG_CONCURRENT_MODE
if(check_buddy_fwstate(padapter, WIFI_AP_STATE))
{
if (check_buddy_fwstate(padapter, WIFI_AP_STATE)) {
//send_beacon(padapter);
if(padapter->pbuddy_adapter->mlmepriv.update_bcn == _TRUE)
if (padapter->pbuddy_adapter->mlmepriv.update_bcn == _TRUE)
{
//tx_beacon_hdl(padapter, NULL);
set_tx_beacon_cmd(padapter->pbuddy_adapter);
}
}
#endif
}
#endif //CONFIG_INTERRUPT_BASED_TXBCN

2
include/autoconf.h
View File

@ -355,4 +355,4 @@
/*#define DBG_MEMORY_LEAK*/
#define DBG_RX_DFRAME_RAW_DATA
/*#define CONFIG_USE_EXTERNAL_POWER */ /* NOT USB2.0 power, so no 500mA power constraint, no limitation in Power by Rate*/
#define CONFIG_USE_EXTERNAL_POWER /* NOT USB2.0 power, so no 500mA power constraint, no limitation in Power by Rate */

0
include/hal_data.h Executable file → Normal file
View File

652
include/hal_data.h.edited
View File

@ -1,652 +0,0 @@
/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __HAL_DATA_H__
#define __HAL_DATA_H__
#if 1//def CONFIG_SINGLE_IMG
#include "../hal/phydm/phydm_precomp.h"
#ifdef CONFIG_BT_COEXIST
#include <hal_btcoex.h>
#endif
#ifdef CONFIG_SDIO_HCI
#include <hal_sdio.h>
#endif
#ifdef CONFIG_GSPI_HCI
#include <hal_gspi.h>
#endif
//
// <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06.
//
typedef enum _RT_MULTI_FUNC{
RT_MULTI_FUNC_NONE = 0x00,
RT_MULTI_FUNC_WIFI = 0x01,
RT_MULTI_FUNC_BT = 0x02,
RT_MULTI_FUNC_GPS = 0x04,
}RT_MULTI_FUNC,*PRT_MULTI_FUNC;
//
// <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08.
//
typedef enum _RT_POLARITY_CTL {
RT_POLARITY_LOW_ACT = 0,
RT_POLARITY_HIGH_ACT = 1,
} RT_POLARITY_CTL, *PRT_POLARITY_CTL;
// For RTL8723 regulator mode. by tynli. 2011.01.14.
typedef enum _RT_REGULATOR_MODE {
RT_SWITCHING_REGULATOR = 0,
RT_LDO_REGULATOR = 1,
} RT_REGULATOR_MODE, *PRT_REGULATOR_MODE;
//
// Interface type.
//
typedef enum _INTERFACE_SELECT_PCIE{
INTF_SEL0_SOLO_MINICARD = 0, // WiFi solo-mCard
INTF_SEL1_BT_COMBO_MINICARD = 1, // WiFi+BT combo-mCard
INTF_SEL2_PCIe = 2, // PCIe Card
} INTERFACE_SELECT_PCIE, *PINTERFACE_SELECT_PCIE;
typedef enum _INTERFACE_SELECT_USB{
INTF_SEL0_USB = 0, // USB
INTF_SEL1_USB_High_Power = 1, // USB with high power PA
INTF_SEL2_MINICARD = 2, // Minicard
INTF_SEL3_USB_Solo = 3, // USB solo-Slim module
INTF_SEL4_USB_Combo = 4, // USB Combo-Slim module
INTF_SEL5_USB_Combo_MF = 5, // USB WiFi+BT Multi-Function Combo, i.e., Proprietary layout(AS-VAU) which is the same as SDIO card
} INTERFACE_SELECT_USB, *PINTERFACE_SELECT_USB;
typedef enum _RT_AMPDU_BRUST_MODE{
RT_AMPDU_BRUST_NONE = 0,
RT_AMPDU_BRUST_92D = 1,
RT_AMPDU_BRUST_88E = 2,
RT_AMPDU_BRUST_8812_4 = 3,
RT_AMPDU_BRUST_8812_8 = 4,
RT_AMPDU_BRUST_8812_12 = 5,
RT_AMPDU_BRUST_8812_15 = 6,
RT_AMPDU_BRUST_8723B = 7,
}RT_AMPDU_BRUST,*PRT_AMPDU_BRUST_MODE;
/*
#define CHANNEL_MAX_NUMBER 14+24+21 // 14 is the max channel number
*/
#define CHANNEL_GROUP_MAX (3 + 9) /* ch1~3, ch4~9, ch10~14 total three groups */
#define MAX_PG_GROUP 13
// Tx Power Limit Table Size
#define MAX_REGULATION_NUM 4
#define MAX_RF_PATH_NUM_IN_POWER_LIMIT_TABLE 4
#define MAX_2_4G_BANDWIDTH_NUM 2
#define MAX_RATE_SECTION_NUM 10
#define MAX_5G_BANDWIDTH_NUM 4
#define MAX_BASE_NUM_IN_PHY_REG_PG_2_4G 10 // CCK:1,OFDM:1, HT:4, VHT:4
#define MAX_BASE_NUM_IN_PHY_REG_PG_5G 9 // OFDM:1, HT:4, VHT:4
//###### duplicate code,will move to ODM #########
//#define IQK_MAC_REG_NUM 4
//#define IQK_ADDA_REG_NUM 16
//#define IQK_BB_REG_NUM 10
#define IQK_BB_REG_NUM_92C 9
#define IQK_BB_REG_NUM_92D 10
#define IQK_BB_REG_NUM_test 6
#define IQK_Matrix_Settings_NUM_92D 1+24+21
//#define HP_THERMAL_NUM 8
//###### duplicate code,will move to ODM #########
#ifdef CONFIG_USB_RX_AGGREGATION
typedef enum _USB_RX_AGG_MODE{
USB_RX_AGG_DISABLE,
USB_RX_AGG_DMA,
USB_RX_AGG_USB,
USB_RX_AGG_MIX
}USB_RX_AGG_MODE;
//#define MAX_RX_DMA_BUFFER_SIZE 10240 // 10K for 8192C RX DMA buffer
#endif
/* For store initial value of BB register */
typedef struct _BB_INIT_REGISTER {
u16 offset;
u32 value;
} BB_INIT_REGISTER, *PBB_INIT_REGISTER;
#define PAGE_SIZE_128 128
#define PAGE_SIZE_256 256
#define PAGE_SIZE_512 512
#define HCI_SUS_ENTER 0
#define HCI_SUS_LEAVING 1
#define HCI_SUS_LEAVE 2
#define HCI_SUS_ENTERING 3
#define HCI_SUS_ERR 4
#ifdef CONFIG_AUTO_CHNL_SEL_NHM
typedef enum _ACS_OP {
ACS_INIT, /*ACS - Variable init*/
ACS_RESET, /*ACS - NHM Counter reset*/
ACS_SELECT, /*ACS - NHM Counter Statistics */
} ACS_OP;
typedef enum _ACS_STATE {
ACS_DISABLE,
ACS_ENABLE,
} ACS_STATE;
struct auto_chan_sel {
ATOMIC_T state;
u8 ch; /* previous channel*/
};
#endif /*CONFIG_AUTO_CHNL_SEL_NHM*/
#define EFUSE_FILE_UNUSED 0
#define EFUSE_FILE_FAILED 1
#define EFUSE_FILE_LOADED 2
#define MACADDR_FILE_UNUSED 0
#define MACADDR_FILE_FAILED 1
#define MACADDR_FILE_LOADED 2
#define KFREE_FLAG_ON BIT0
#define KFREE_FLAG_THERMAL_K_ON BIT1
struct kfree_data_t {
u8 flag;
s8 bb_gain[BB_GAIN_NUM][RF_PATH_MAX];
#ifdef CONFIG_IEEE80211_BAND_5GHZ
s8 pa_bias_5g[RF_PATH_MAX];
s8 pad_bias_5g[RF_PATH_MAX];
#endif
s8 thermal;
};
bool kfree_data_is_bb_gain_empty(struct kfree_data_t *data);
struct hal_spec_t {
u8 macid_num;
u8 sec_cam_ent_num;
u8 sec_cap;
u8 nss_num;
u8 band_cap; /* value of BAND_CAP_XXX */
u8 bw_cap; /* value of BW_CAP_XXX */
u8 wl_func; /* value of WL_FUNC_XXX */
};
typedef struct hal_com_data
{
HAL_VERSION VersionID;
RT_MULTI_FUNC MultiFunc; // For multi-function consideration.
RT_POLARITY_CTL PolarityCtl; // For Wifi PDn Polarity control.
RT_REGULATOR_MODE RegulatorMode; // switching regulator or LDO
u8 hw_init_completed;
/****** FW related ******/
u16 FirmwareVersion;
u16 FirmwareVersionRev;
u16 FirmwareSubVersion;
u16 FirmwareSignature;
u8 RegFWOffload;
u8 fw_ractrl;
u8 FwRsvdPageStartOffset; /* 2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.*/
u8 LastHMEBoxNum; /* H2C - for host message to fw */
/****** current WIFI_PHY values ******/
WIRELESS_MODE CurrentWirelessMode;
CHANNEL_WIDTH CurrentChannelBW;
BAND_TYPE CurrentBandType; /* 0:2.4G, 1:5G */
BAND_TYPE BandSet;
u8 CurrentChannel;
u8 CurrentCenterFrequencyIndex1;
u8 nCur40MhzPrimeSC; /* Control channel sub-carrier */
u8 nCur80MhzPrimeSC; /* used for primary 40MHz of 80MHz mode */
BOOLEAN bSwChnlAndSetBWInProgress;
u8 bDisableSWChannelPlan; /* flag of disable software change channel plan */
u16 BasicRateSet;
u32 ReceiveConfig;
BOOLEAN bSwChnl;
BOOLEAN bSetChnlBW;
BOOLEAN bChnlBWInitialized;
#ifdef CONFIG_AUTO_CHNL_SEL_NHM
struct auto_chan_sel acs;
#endif
/****** rf_ctrl *****/
u8 rf_chip;
u8 rf_type;
u8 PackageType;
u8 NumTotalRFPath;
/****** Debug ******/
u16 ForcedDataRate; /* Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M. */
u8 u1ForcedIgiLb; /* forced IGI lower bound */
u8 bDumpRxPkt;
u8 bDumpTxPkt;
u8 bDisableTXPowerTraining;
/****** EEPROM setting.******/
u8 bautoload_fail_flag;
u8 efuse_file_status;
u8 macaddr_file_status;
u8 EepromOrEfuse;
u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /*92C:256bytes, 88E:512bytes, we use union set (512bytes)*/
u8 InterfaceSel; /* board type kept in eFuse */
u16 CustomerID;
u16 EEPROMVID;
u16 EEPROMSVID;
#ifdef CONFIG_USB_HCI
u16 EEPROMPID;
u16 EEPROMSDID;
#endif
#ifdef CONFIG_PCI_HCI
u16 EEPROMDID;
u16 EEPROMSMID;
#endif
u8 EEPROMCustomerID;
u8 EEPROMSubCustomerID;
u8 EEPROMVersion;
u8 EEPROMRegulatory;
u8 EEPROMThermalMeter;
u8 EEPROMBluetoothCoexist;
u8 EEPROMBluetoothType;
u8 EEPROMBluetoothAntNum;
u8 EEPROMBluetoothAntIsolation;
u8 EEPROMBluetoothRadioShared;
u8 bTXPowerDataReadFromEEPORM;
u8 EEPROMMACAddr[ETH_ALEN];
#ifdef CONFIG_RF_GAIN_OFFSET
u8 EEPROMRFGainOffset;
u8 EEPROMRFGainVal;
struct kfree_data_t kfree_data;
#endif /*CONFIG_RF_GAIN_OFFSET*/
#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B)
u8 adjuseVoltageVal;
#endif
u8 EfuseUsedPercentage;
u16 EfuseUsedBytes;
/*u8 EfuseMap[2][HWSET_MAX_SIZE_JAGUAR];*/
EFUSE_HAL EfuseHal;
/*---------------------------------------------------------------------------------*/
//3 [2.4G]
u8 Index24G_CCK_Base[MAX_RF_PATH][CENTER_CH_2G_NUM];
u8 Index24G_BW40_Base[MAX_RF_PATH][CENTER_CH_2G_NUM];
//If only one tx, only BW20 and OFDM are used.
s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
//3 [5G]
u8 Index5G_BW40_Base[MAX_RF_PATH][CENTER_CH_5G_ALL_NUM];
u8 Index5G_BW80_Base[MAX_RF_PATH][CENTER_CH_5G_80M_NUM];
s8 OFDM_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW80_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
u8 Regulation2_4G;
u8 Regulation5G;
u8 TxPwrInPercentage;
/********************************
* TX power by rate table at most 4RF path.
* The register is
*
* VHT TX power by rate off setArray =
* Band:-2G&5G = 0 / 1
* RF: at most 4*4 = ABCD=0/1/2/3
* CCK=0 OFDM=1/2 HT-MCS 0-15=3/4/56 VHT=7/8/9/10/11
**********************************/
u8 TxPwrByRateTable;
u8 TxPwrByRateBand;
s8 TxPwrByRateOffset[TX_PWR_BY_RATE_NUM_BAND]
[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RATE];
//---------------------------------------------------------------------------------//
/*
//2 Power Limit Table
u8 TxPwrLevelCck[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
u8 TxPwrLevelHT40_1S[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
u8 TxPwrLevelHT40_2S[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
s8 TxPwrHt20Diff[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
u8 TxPwrLegacyHtDiff[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
*/
u8 tx_pwr_lmt_5g_20_40_ref;
// Power Limit Table for 2.4G
s8 TxPwrLimit_2_4G[MAX_REGULATION_NUM]
[MAX_2_4G_BANDWIDTH_NUM]
[MAX_RATE_SECTION_NUM]
[CENTER_CH_2G_NUM]
[MAX_RF_PATH];
// Power Limit Table for 5G
s8 TxPwrLimit_5G[MAX_REGULATION_NUM]
[MAX_5G_BANDWIDTH_NUM]
[MAX_RATE_SECTION_NUM]
[CENTER_CH_5G_ALL_NUM]
[MAX_RF_PATH];
// Store the original power by rate value of the base of each rate section of rf path A & B
u8 TxPwrByRateBase2_4G[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[MAX_BASE_NUM_IN_PHY_REG_PG_2_4G];
u8 TxPwrByRateBase5G[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[MAX_BASE_NUM_IN_PHY_REG_PG_5G];
<<<<<<< .mine
u8 TxPwrShadow[MAX_RF_PATH][DESC_RATEMAX];
=======
u8 txpwr_by_rate_loaded:1;
u8 txpwr_by_rate_from_file:1;
u8 txpwr_limit_loaded:1;
u8 txpwr_limit_from_file:1;
>>>>>>> .r15056
// For power group
/*
u8 PwrGroupHT20[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
u8 PwrGroupHT40[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
*/
u8 PGMaxGroup;
// The current Tx Power Level
u8 CurrentCckTxPwrIdx;
u8 CurrentOfdm24GTxPwrIdx;
u8 CurrentBW2024GTxPwrIdx;
u8 CurrentBW4024GTxPwrIdx;
// Read/write are allow for following hardware information variables
u8 pwrGroupCnt;
u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
u32 CCKTxPowerLevelOriginalOffset;
u8 CrystalCap;
u8 PAType_2G;
u8 PAType_5G;
u8 LNAType_2G;
u8 LNAType_5G;
u8 ExternalPA_2G;
u8 ExternalLNA_2G;
u8 ExternalPA_5G;
u8 ExternalLNA_5G;
u16 TypeGLNA;
u16 TypeGPA;
u16 TypeALNA;
u16 TypeAPA;
u16 RFEType;
u8 bLedOpenDrain; /* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */
u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
BB_REGISTER_DEFINITION_T PHYRegDef[MAX_RF_PATH]; //Radio A/B/C/D
u32 RfRegChnlVal[MAX_RF_PATH];
//RDG enable
BOOLEAN bRDGEnable;
u8 RegTxPause;
// Beacon function related global variable.
u8 RegBcnCtrlVal;
u8 RegFwHwTxQCtrl;
u8 RegReg542;
u8 RegCR_1;
u8 Reg837;
u16 RegRRSR;
/****** antenna diversity ******/
u8 CurAntenna;
u8 AntDivCfg;
u8 AntDetection;
u8 TRxAntDivType;
u8 ant_path; //for 8723B s0/s1 selection
u32 AntennaTxPath; /* Antenna path Tx */
u32 AntennaRxPath; /* Antenna path Rx */
/******** PHY DM & DM Section **********/
u8 DM_Type;
_lock IQKSpinLock;
u8 INIDATA_RATE[MACID_NUM_SW_LIMIT];
/* Upper and Lower Signal threshold for Rate Adaptive*/
int EntryMinUndecoratedSmoothedPWDB;
int EntryMaxUndecoratedSmoothedPWDB;
int MinUndecoratedPWDBForDM;
DM_ODM_T odmpriv;
u8 bIQKInitialized;
u8 bNeedIQK;
/******** PHY DM & DM Section **********/
// 2010/08/09 MH Add CU power down mode.
BOOLEAN pwrdown;
// Add for dual MAC 0--Mac0 1--Mac1
u32 interfaceIndex;
#ifdef CONFIG_P2P
u8 p2p_ps_offload;
#endif
/* Auto FSM to Turn On, include clock, isolation, power control for MAC only */
u8 bMacPwrCtrlOn;
u8 hci_sus_state;
u8 RegIQKFWOffload;
struct submit_ctx iqk_sctx;
RT_AMPDU_BRUST AMPDUBurstMode; //92C maybe not use, but for compile successfully
u8 OutEpQueueSel;
u8 OutEpNumber;
#if defined (CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
//
// For SDIO Interface HAL related
//
//
// SDIO ISR Related
//
// u32 IntrMask[1];
// u32 IntrMaskToSet[1];
// LOG_INTERRUPT InterruptLog;
u32 sdio_himr;
u32 sdio_hisr;
//
// SDIO Tx FIFO related.
//
// HIQ, MID, LOW, PUB free pages; padapter->xmitpriv.free_txpg
u8 SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE];
_lock SdioTxFIFOFreePageLock;
u8 SdioTxOQTMaxFreeSpace;
u8 SdioTxOQTFreeSpace;
//
// SDIO Rx FIFO related.
//
u8 SdioRxFIFOCnt;
u16 SdioRxFIFOSize;
u32 sdio_tx_max_len[SDIO_MAX_TX_QUEUE];// H, N, L, used for sdio tx aggregation max length per queue
#endif //CONFIG_SDIO_HCI
#ifdef CONFIG_USB_HCI
// 2010/12/10 MH Add for USB aggreation mode dynamic shceme.
BOOLEAN UsbRxHighSpeedMode;
BOOLEAN UsbTxVeryHighSpeedMode;
u32 UsbBulkOutSize;
BOOLEAN bSupportUSB3;
// Interrupt relatd register information.
u32 IntArray[3];//HISR0,HISR1,HSISR
u32 IntrMask[3];
u8 C2hArray[16];
#ifdef CONFIG_USB_TX_AGGREGATION
u8 UsbTxAggMode;
u8 UsbTxAggDescNum;
#endif // CONFIG_USB_TX_AGGREGATION
#ifdef CONFIG_USB_RX_AGGREGATION
u16 HwRxPageSize; // Hardware setting
u32 MaxUsbRxAggBlock;
USB_RX_AGG_MODE UsbRxAggMode;
u8 UsbRxAggBlockCount; /* FOR USB Mode, USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed */
u8 UsbRxAggBlockTimeout;
u8 UsbRxAggPageCount; /* FOR DMA Mode, 8192C DMA page count*/
u8 UsbRxAggPageTimeout;
u8 RegAcUsbDmaSize;
u8 RegAcUsbDmaTime;
#endif//CONFIG_USB_RX_AGGREGATION
#endif //CONFIG_USB_HCI
#ifdef CONFIG_PCI_HCI
//
// EEPROM setting.
//
u32 TransmitConfig;
u32 IntrMaskToSet[2];
u32 IntArray[2];
u32 IntrMask[2];
u32 SysIntArray[1];
u32 SysIntrMask[1];
u32 IntrMaskReg[2];
u32 IntrMaskDefault[2];
BOOLEAN bL1OffSupport;
BOOLEAN bSupportBackDoor;
u8 bDefaultAntenna;
u8 bInterruptMigration;
u8 bDisableTxInt;
u16 RxTag;
#endif //CONFIG_PCI_HCI
#ifdef DBG_CONFIG_ERROR_DETECT
struct sreset_priv srestpriv;
#endif //#ifdef DBG_CONFIG_ERROR_DETECT
#ifdef CONFIG_BT_COEXIST
// For bluetooth co-existance
BT_COEXIST bt_coexist;
#endif // CONFIG_BT_COEXIST
#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B) || defined(CONFIG_RTL8188F)
#ifndef CONFIG_PCI_HCI // mutual exclusive with PCI -- so they're SDIO and GSPI
// Interrupt relatd register information.
u32 SysIntrStatus;
u32 SysIntrMask;
#endif
#endif /*endif CONFIG_RTL8723B */
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
char para_file_buf[MAX_PARA_FILE_BUF_LEN];
char *mac_reg;
u32 mac_reg_len;
char *bb_phy_reg;
u32 bb_phy_reg_len;
char *bb_agc_tab;
u32 bb_agc_tab_len;
char *bb_phy_reg_pg;
u32 bb_phy_reg_pg_len;
char *bb_phy_reg_mp;
u32 bb_phy_reg_mp_len;
char *rf_radio_a;
u32 rf_radio_a_len;
char *rf_radio_b;
u32 rf_radio_b_len;
char *rf_tx_pwr_track;
u32 rf_tx_pwr_track_len;
char *rf_tx_pwr_lmt;
u32 rf_tx_pwr_lmt_len;
#endif
#ifdef CONFIG_BACKGROUND_NOISE_MONITOR
s16 noise[ODM_MAX_CHANNEL_NUM];
#endif
struct hal_spec_t hal_spec;
u8 RfKFreeEnable;
u8 RfKFree_ch_group;
BOOLEAN bCCKinCH14;
BB_INIT_REGISTER RegForRecover[5];
} HAL_DATA_COMMON, *PHAL_DATA_COMMON;
typedef struct hal_com_data HAL_DATA_TYPE, *PHAL_DATA_TYPE;
#define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)((__pAdapter)->HalData))
#define GET_HAL_SPEC(__pAdapter) (&(GET_HAL_DATA((__pAdapter))->hal_spec))
#define GET_HAL_RFPATH_NUM(__pAdapter) (((HAL_DATA_TYPE *)((__pAdapter)->HalData))->NumTotalRFPath )
#define RT_GetInterfaceSelection(_Adapter) (GET_HAL_DATA(_Adapter)->InterfaceSel)
#define GET_RF_TYPE(__pAdapter) (GET_HAL_DATA(__pAdapter)->rf_type)
#define GET_KFREE_DATA(_adapter) (&(GET_HAL_DATA((_adapter))->kfree_data))
#define SUPPORT_HW_RADIO_DETECT(Adapter) ( RT_GetInterfaceSelection(Adapter) == INTF_SEL2_MINICARD ||\
RT_GetInterfaceSelection(Adapter) == INTF_SEL3_USB_Solo ||\
RT_GetInterfaceSelection(Adapter) == INTF_SEL4_USB_Combo)
#define get_hal_mac_addr(adapter) (GET_HAL_DATA(adapter)->EEPROMMACAddr)
#define is_boot_from_eeprom(adapter) (GET_HAL_DATA(adapter)->EepromOrEfuse)
#define rtw_get_hw_init_completed(adapter) (GET_HAL_DATA(adapter)->hw_init_completed)
#define rtw_is_hw_init_completed(adapter) (GET_HAL_DATA(adapter)->hw_init_completed == _TRUE)
#endif
#ifdef CONFIG_AUTO_CHNL_SEL_NHM
#define GET_ACS_STATE(padapter) (ATOMIC_READ(&GET_HAL_DATA(padapter)->acs.state))
#define SET_ACS_STATE(padapter, set_state) (ATOMIC_SET(&GET_HAL_DATA(padapter)->acs.state, set_state))
#define rtw_get_acs_channel(padapter) (GET_HAL_DATA(padapter)->acs.ch)
#define rtw_set_acs_channel(padapter, survey_ch) (GET_HAL_DATA(padapter)->acs.ch = survey_ch)
#endif /*CONFIG_AUTO_CHNL_SEL_NHM*/
#endif //__HAL_DATA_H__

0
include/rtl8723b_hal.h Executable file → Normal file
View File

0
include/rtl8723b_led.h Executable file → Normal file
View File

0
include/rtl8723b_recv.h Executable file → Normal file
View File

0
include/rtl8723b_spec.h Executable file → Normal file
View File

0
include/rtl8723b_xmit.h Executable file → Normal file
View File

0
include/rtl8814a_cmd.h Executable file → Normal file
View File

0
include/rtl8814a_hal.h Executable file → Normal file
View File

0
include/rtl8814a_recv.h Executable file → Normal file
View File

0
include/rtl8814a_spec.h Executable file → Normal file
View File

0
include/rtl8814a_xmit.h Executable file → Normal file
View File

0
include/rtl8822be_hal.h Executable file → Normal file
View File