mirrors/rtl8812au
1
0
Fork 0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2025-01-23 09:50:08 +00:00
Code Releases Activity

Update README.md

Browse Source
This commit is contained in:
Christian B 2018-12-23 19:30:06 +01:00 committed by GitHub
parent d699c4fedf
commit aef7b192fd
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 13 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
README.md
View File

@ -19,6 +19,9 @@
may be seen rolling out over here https://github.com/aircrack-ng/rtl8812au/pull/246
* october: airmon-ng now got support for this driver (even without virtual interface support)
*** Kernel v4.19 and v4.20 supported. ***
Also working to get both old/new kernels supported.
```
### DKMS
@ -59,13 +62,13 @@ $ sudo apt-get install bc
$ sudo apt-get install libelf-dev
$ sudo apt-get install linux-headers-`uname -r`
```
For Raspberry (RPI 2/3)
For Raspberry (RPI 2/3) you will need kernel sources
```
$ sudo wget "https://raw.githubusercontent.com/notro/rpi-source/master/rpi-source" -O /usr/bin/rpi-source
$ sudo chmod 755 /usr/bin/rpi-source
$ sudo rpi-source
```
Then you need to
Then you need to download and compile the driver on the RPI
```
$ git clone https://github.com/aircrack-ng/rtl8812au -b v5.2.20
$ cd rtl*
@ -74,13 +77,13 @@ $ sudo cp 8812au.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless
$ sudo depmod -a
$ sudo modprobe 88XXau
```
then run this to change platform in Makefile
then run this step to change platform in Makefile, For RPI 2/3:
```
$ sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile
$ sed -i 's/CONFIG_PLATFORM_ARM_RPI = n/CONFIG_PLATFORM_ARM_RPI = y/g' Makefil
```
But for RPI 3 B+ you will need to run those below
the ARM64 arch build
which builds the ARM64 arch driver:
```
$ sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile
$ sed -i 's/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g' Makefile
@ -95,23 +98,23 @@ For setting monitor mode
2. Set interface down
```
$ $ sudo ip link set wlan1 down
$ $ sudo ip link set <wlan1> down
```
3. Set monitor mode
```
$ sudo airmon-ng start wlan#
$ sudo airmon-ng start <wlan1>
or
$ sudo iw dev wlan# set type monitor
$ sudo iw dev <wlan1> set type monitor
```
4. Set interface up
```
$ sudo ip link set wlan0 up
$ sudo ip link set <wlan1> up
```
For setting TX power
```
$ sudo iwconfig wlan0 txpower 30
$ sudo iwconfig <wlan1> txpower 30
or
$ sudo iw wlan0 set txpower fixed 3000
$ sudo iw <wla1> nset txpower fixed 3000
```
### LED control