mirrors/rtl8812au
1
0
Fork 0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2024-11-22 21:34:37 +00:00
Code Releases Activity

Beatify README md

Browse Source
This commit is contained in:
Christian Bremvåg 2019-11-14 23:19:48 +01:00 committed by GitHub
parent 55484785cc
commit ac911b45c8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 33 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

66
README.md
View File

@ -36,13 +36,14 @@ interference with 'airmon-ng check kill' or 'kill -9 <pid>' first!
* Android 10 supported
* Monitor mode
* Frame injection
* MESH Mode (IBSS)
* WPA3 SAE
* Wi-Fi Direct
* wpa_supplicant
* Hostapd
* USB 3.0 (currently forced down to 2.0)
* USB 3.0 (currently forced down to 2)
* Kernel up to v5.3+
* RTKMPtool for low level debug
* RTKMPtool Android app (low level debug)
```
### Known Issues
@ -59,7 +60,7 @@ interference with 'airmon-ng check kill' or 'kill -9 <pid>' first!
```
* Do a walkthrough in the code, use some time and
check every corner og HAL and PHYDM for more junk & bugs.
check every corner of HAL and PHYDM for more junk & bugs.
```
### IPERF3 benchmark
<b>[Device]</b> Alfa Networks AWUS036ACH<br>
@ -100,45 +101,45 @@ interference with 'airmon-ng check kill' or 'kill -9 <pid>' first!
### DKMS
This driver can be installed using [DKMS]. This is a system which will automatically recompile and install a kernel module when a new kernel gets installed or updated. To make use of DKMS, install the `dkms` package, which on Debian (based) systems is done like this:
```
sudo apt-get install dkms
$ sudo apt-get install dkms
```
### Installation of Driver
In order to install the driver open a terminal in the directory with the source code and execute the following command:
```
sudo ./dkms-install.sh
$ sudo ./dkms-install.sh
```
### Removal of Driver
In order to remove the driver from your system open a terminal in the directory with the source code and execute the following command:
```
sudo ./dkms-remove.sh
$ sudo ./dkms-remove.sh
```
### Make
For building & installing the driver with 'make' use
```
make
make install
$ make
$ make install
```
### Notes
Download
```
git clone -b v5.6.4.2 https://github.com/aircrack-ng/rtl8812au.git
$ git clone -b v5.6.4.2 https://github.com/aircrack-ng/rtl8812au.git
cd rtl*
```
Package / Build dependencies (Kali)
```
sudo apt-get install build-essential
sudo apt-get install bc
sudo apt-get install libelf-dev
sudo apt-get install linux-headers-`uname -r`
$ sudo apt-get install build-essential
$ sudo apt-get install bc
$ sudo apt-get install libelf-dev
$ sudo apt-get install linux-headers-`uname -r`
```
#### For Raspberry (RPI)
```
sudo apt-get install bc raspberrypi-kernel-headers
$ sudo apt-get install bc raspberrypi-kernel-headers
```
Then run this step to change platform in Makefile, For RPI 1/2/3/ & 0/Zero:
@ -155,32 +156,32 @@ $ sed -i 's/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g' Makef
In addition, if you receive an error message about `unrecognized command line option ‘-mgeneral-regs-only’` (i.e., Raspbian Buster), you will need to run the following commands:
```
sed -i 's/^dkms build/ARCH=arm dkms build/' dkms-install.sh
sed -i 's/^MAKE="/MAKE="ARCH=arm\ /' dkms.conf
$ sed -i 's/^dkms build/ARCH=arm dkms build/' dkms-install.sh
$ sed -i 's/^MAKE="/MAKE="ARCH=arm\ /' dkms.conf
```
For setting monitor mode
1. Fix problematic interference in monitor mode.
```
airmon-ng check kill
$ airmon-ng check kill
```
You may also uncheck the box "Automatically connect to this network when it is avaiable" in nm-connection-editor. This only works if you have a saved wifi connection.
2. Set interface down
```
sudo ip link set wlan0 down
$ sudo ip link set wlan0 down
```
3. Set monitor mode
```
sudo iw dev wlan0 set type monitor
$ sudo iw dev wlan0 set type monitor
```
4. Set interface up
```
sudo ip link set wlan0 up
$ sudo ip link set wlan0 up
```
For setting TX power
```
sudo iw wlan0 set txpower fixed 3000
$ sudo iw wlan0 set txpower fixed 3000
```
### LED control
@ -230,23 +231,22 @@ wifi.scan-rand-mac-address=no
```
at the end of file /etc/NetworkManager/NetworkManager.conf and restart NetworkManager with the command:
```
sudo service NetworkManager restart
$ sudo service NetworkManager restart
```
### Credits / Contributors
```
astsam - https://github.com/astsam
aircrack-ng - https://github.com/aircrack-ng
evilphish - https://github.com/evilphish
fariouche - https://github.com/fariouche
CGarces - https://github.com/CGarces
ZerBea - https://github.com/ZerBea
lwfinger - https://github.com/lwfinger
Ulli-Kroll - https://github.com/Ulli-Kroll
Alfa Networks - https://www.alfa.com.tw/
Realtek. - https://www.realtek.com
aircrack-ng - https://www.aircrack-ng.org
Also, thanks to Realtek and Alfa Networks for all they're help & support.
All the others interested and participating. Appreciate it!
astsam - https://github.com/astsam
evilphish - https://github.com/evilphish
fariouche - https://github.com/fariouche
CGarces - https://github.com/CGarces
ZerBea - https://github.com/ZerBea
lwfinger - https://github.com/lwfinger
Ulli-Kroll. - https://github.com/Ulli-Kroll
```