Add files via upload

BUILD_FOR_NETHUNTER.md

@@ -0,0 +1,116 @@
+## Driver version 5.6.4.2
+
+## First Edit the ioctl_cfg80211.c file in this location rtl8812au/os_dep/linux/ioctl_cfg80211.c
+
+    line no 2328 sinfo->bss_param.flags |= NL80211_STA_BSS_PARAM_SHORT_PREAMBLE;
+    line no 2331 sinfo->bss_param.flags |= NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME;
+    line no 2335 sinfo->bss_param.flags |= NL80211_STA_BSS_PARAM_CTS_PROT;
+    line no 2338 sinfo->bss_param.flags |= NL80211_STA_BSS_PARAM_DTIM_PERIOD;
+
+
+## Some Important Points
+
+Do not change your kernel name or version in any manner while preparing the module or else it will not work and you will get errors like insmod 8188.ko >> fatal error exec format failed. This happens when you use build script from kali site and on the other hand you build your modules manually.
+
+For example say during the time of building kernel your situation was like /lib/modules/3.10.35-kali and while making the module your position is say /lib/modules/3.10.35_kali or anything else. This kind of thing will not work. So first built your kernel then just after that build your modules.
+
+
+## Toolchain Used for building this module - gcc-linaro-7.5.0-2019.12-x86_64_arm-linux-gnueabihf
+
+## 2.Your kernel should enabled below. check in /proc/config.gz or device_defconfig
+
+CONFIG_MODULES (loadable module support)
+
+CONFIG_MODULE_FORCE_LOAD (forced module loading)
+
+CONFIG_MODULE_UNLOAD (module unloading)
+
+CONFIG_MODULE_FORCE_UNLOAD (forced module loading)
+
+CONFIG_CFG80211_WEXT (wireless extension compability)
+
+CONFIG_MAC80211 (IEEE 802.11 Networking Stack)
+
+
+## Step 1- Do the following: After building the kernel stay inside that directory so the first line is irrelevant.
+
+
+Cd android kernel-sourcedirectory on your pc or laptop
+
+mkdir ../kernel-headers (make kernel-headers directory outside kernel source)
+
+make O=../kernel-headers someone_defconfig
+
+make O=../kernel-headers modules_prepare (prepare module)
+
+make O=../kernel-headers modules INSTALL_MOD_PATH=../kernel-headers (make modules)
+
+make O=../kernel-headers modules_install INSTALL_MOD_PATH=../kernel-headers(install modules)
+
+
+
+## Build Kernel Headers ( shown for armhf/arm only do changes for arm64)
+
+make headers_install CROSS_COMPILE=$path-your-cross-compiler ARCH=arm SUBARCH=arm INSTALL_HDR_PATH=../kernel-headers (install kernel headers on the same directory ie “kernel-headers”)
+
+-Note eg: CROSS_COMPILE= /home/user/gcc-linaro-7.5.0-2019.12-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-
+
+
+## Build RTL8188EUS driver/modules
+
+```
+cd ../
+git clone -b v5.6.4.2 https://github.com/aircrack-ng/rtl8812au.git
+cd rtl8812au
+
+
+Now enter rtl8188eus directory using your file manager and edit the “makefile” as follows: for armhf
+
+---------Platform Related (armhf/arm only for arm64 change respective line)------------
+
+Line number 94-95
+
+CONFIG_PLATFORM_I386_PC = n
+CONFIG_PLATFORM_ANDROID_ARM64 = n (for arm64 make this y)
+CONFIG_PLATFORM_ARM_RPI = y
+
+------------------For ARM ToolChain use Hardware FLOATING line number 1056-1165-------------------
+(Again for armhf/arm do the following but for arm64 first find your respective section then do the
+ editing.)
+
+ifeq ($(CONFIG_PLATFORM_ARM_RPI), y)
+
+EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
+
+EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
+
+ARCH ?= arm
+
+CROSS_COMPILE ?=toolchain path (give urs)
+
+KVER ?= 3.18.35-kali	(give urs version /lib/modules/)
+
+KSRC := fullpath not shown include it/kernel-headers/lib/modules/3.18.35-kali/build	(give urs)
+
+MODDESTDIR := fullpath not shown include it/3.18.35-kali/kernel/drivers/net/wireless/	(give urs)
+
+INSTALL_PREFIX := leave as it is
+
+Endif
+
+## Step 4- from inside of rtl8188eus directory 
+
+export ARCH=arm
+
+Make
+
+Done enjoy your 8188eu.ko inside this same directory. Transfer it to your nethunter by reflashing
+kernel after including it inside /lib/modules/(uname -r)/. 
+
+## Load the driver (8188eu.ko)
+```
+su
+cd /system/lib/modules
+insmod 8188eu.ko
+```
+ENJOY........