rtl8812au/hal/phydm/phydm_antdiv.h

/******************************************************************************
 *
 * Copyright(c) 2007 - 2017  Realtek Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * The full GNU General Public License is included in this distribution in the
 * file called LICENSE.
 *
 * Contact Information:
 * wlanfae <wlanfae@realtek.com>
 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
 * Hsinchu 300, Taiwan.
 *
 * Larry Finger <Larry.Finger@lwfinger.net>
 *
 *****************************************************************************/

#ifndef __PHYDMANTDIV_H__
#define __PHYDMANTDIV_H__

/*@#define ANTDIV_VERSION	"2.0"  //2014.11.04*/
/*@#define ANTDIV_VERSION	"2.1"  //2015.01.13  Dino*/
/*@#define ANTDIV_VERSION	"2.2"  2015.01.16  Dino*/
/*@#define ANTDIV_VERSION	"3.1"  2015.07.29  YuChen,remove 92c 92d 8723a*/
/*@#define ANTDIV_VERSION	"3.2"  2015.08.11  Stanley, disable antenna*/
				/*@diversity when BT is enable for 8723B*/
/*@#define ANTDIV_VERSION	"3.3"  2015.08.12  Stanley. 8723B does not*/
				/*@need to check the antenna is control by BT,*/
				/*@because antenna diversity only works when */
				/*@BT is disable or radio off*/
/*@#define ANTDIV_VERSION	"3.4"  2015.08.28 Dino 1.Add 8821A Smart */
				/*@Antenna 2. Add 8188F SW S0S1 Antenna*/
				/*@Diversity*/
/*@#define ANTDIV_VERSION	"3.5"  2015.10.07 Stanley Always check antenna*/
				/*@detection result from BT-coex. for 8723B,*/
				/*@not from PHYDM*/
/*@#define ANTDIV_VERSION	"3.6"*/ /*@2015.11.16  Stanley  */
/*@#define ANTDIV_VERSION	"3.7"  2015.11.20 Dino Add SmartAnt FAT Patch */
/*@#define ANTDIV_VERSION	"3.8"  2015.12.21 Dino, Add SmartAnt dynamic*/
				/*@training packet num */
/*@#define ANTDIV_VERSION	"3.9"  2016.01.05 Dino, Add SmartAnt cmd for*/
				/*@converting single & two smtant, and add cmd*/
				/*@for adjust truth table */
#define ANTDIV_VERSION "4.0"	/*@2017.05.25  Mark, Add SW antenna diversity*/
				/*@for 8821c because HW transient issue */

/* @1 ============================================================
 * 1  Definition
 * 1 ============================================================
 */

#define	ANTDIV_INIT		0xff
#define	MAIN_ANT	1		/*@ant A or ant Main   or S1*/
#define	AUX_ANT		2		/*@AntB or ant Aux   or S0*/
#define	MAX_ANT		3		/* @3 for AP using*/

#define ANT1_2G 0
/* @= ANT2_5G for 8723D  BTG S1 RX S0S1 diversity for 8723D, TX fixed at S1 */
#define ANT2_2G 1
/* @= ANT1_5G for 8723D  BTG S0  RX S0S1 diversity for 8723D, TX fixed at S1 */
/*smart antenna*/
#define SUPPORT_RF_PATH_NUM 4
#define SUPPORT_BEAM_PATTERN_NUM 4
#define NUM_ANTENNA_8821A	2

#define SUPPORT_BEAM_SET_PATTERN_NUM		16

#define	NO_FIX_TX_ANT		0
#define	FIX_TX_AT_MAIN	1
#define	FIX_AUX_AT_MAIN	2

/* @Antenna Diversty Control type */
#define	ODM_AUTO_ANT		0
#define	ODM_FIX_MAIN_ANT	1
#define	ODM_FIX_AUX_ANT	2

#define ODM_N_ANTDIV_SUPPORT (ODM_RTL8188E | ODM_RTL8192E | ODM_RTL8723B |\
			ODM_RTL8188F | ODM_RTL8723D | ODM_RTL8195A |\
			ODM_RTL8197F | ODM_RTL8721D | ODM_RTL8710C)
#define ODM_AC_ANTDIV_SUPPORT (ODM_RTL8821 | ODM_RTL8881A | ODM_RTL8812 |\
			ODM_RTL8821C | ODM_RTL8822B | ODM_RTL8814B |\
			ODM_RTL8195B)
#define ODM_JGR3_ANTDIV_SUPPORT (ODM_RTL8197G | ODM_RTL8723F)
#define ODM_ANTDIV_SUPPORT	(ODM_N_ANTDIV_SUPPORT | ODM_AC_ANTDIV_SUPPORT |\
			ODM_JGR3_ANTDIV_SUPPORT)
#define ODM_SMART_ANT_SUPPORT	(ODM_RTL8188E | ODM_RTL8192E)
#define ODM_HL_SMART_ANT_TYPE1_SUPPORT		(ODM_RTL8821 | ODM_RTL8822B)

#define ODM_ANTDIV_2G_SUPPORT_IC (ODM_RTL8188E | ODM_RTL8192E | ODM_RTL8723B |\
			ODM_RTL8881A | ODM_RTL8188F | ODM_RTL8723D |\
			ODM_RTL8197F | ODM_RTL8197G|ODM_RTL8723F)
#define ODM_ANTDIV_5G_SUPPORT_IC (ODM_RTL8821 | ODM_RTL8881A | ODM_RTL8812 |\
			ODM_RTL8821C | ODM_RTL8822B | ODM_RTL8195B|ODM_RTL8723F)

#define ODM_ANTDIV_SUPPORT_IC (ODM_ANTDIV_2G_SUPPORT_IC | ODM_ANTDIV_5G_SUPPORT_IC)

#define ODM_EVM_ANTDIV_IC (ODM_RTL8192E | ODM_RTL8197F | ODM_RTL8822B |\
			ODM_RTL8197G)

#define ODM_ANTDIV_2G	BIT(0)
#define ODM_ANTDIV_5G	BIT(1)

#define ANTDIV_ON	1
#define ANTDIV_OFF	0

#define ANT_PATH_A	0
#define ANT_PATH_B	1
#define ANT_PATH_AB	2

#define FAT_ON	1
#define FAT_OFF	0

#define TX_BY_DESC	1
#define TX_BY_REG	0

#define RSSI_METHOD	0
#define EVM_METHOD		1
#define CRC32_METHOD	2
#define TP_METHOD		3

#define INIT_ANTDIV_TIMMER		0
#define CANCEL_ANTDIV_TIMMER	1
#define RELEASE_ANTDIV_TIMMER	2

#define CRC32_FAIL	1
#define CRC32_OK	0

#define evm_rssi_th_high	25
#define evm_rssi_th_low	20

#define NORMAL_STATE_MIAN	1
#define NORMAL_STATE_AUX	2
#define TRAINING_STATE		3

#define FORCE_RSSI_DIFF 10

#define HT_IDX 16
#define VHT_IDX 20

#define CSI_ON	1
#define CSI_OFF	0

#define DIVON_CSIOFF 1
#define DIVOFF_CSION 2

#define BDC_DIV_TRAIN_STATE	0
#define bdc_bfer_train_state	1
#define BDC_DECISION_STATE		2
#define BDC_BF_HOLD_STATE		3
#define BDC_DIV_HOLD_STATE		4

#define BDC_MODE_1 1
#define BDC_MODE_2 2
#define BDC_MODE_3 3
#define BDC_MODE_4 4
#define BDC_MODE_NULL 0xff

/*SW S0S1 antenna diversity*/
#define SWAW_STEP_INIT			0xff
#define SWAW_STEP_PEEK		0
#define SWAW_STEP_DETERMINE	1

#define RSSI_CHECK_RESET_PERIOD	10
#define RSSI_CHECK_THRESHOLD		50

/*@Hong Lin Smart antenna*/
#define HL_SMTANT_2WIRE_DATA_LEN 24

#if (RTL8723D_SUPPORT == 1 || RTL8710C_SUPPORT == 1)
	#ifndef CONFIG_ANTDIV_PERIOD
		#define CONFIG_ANTDIV_PERIOD 1
	#endif
#endif
/* @1 ============================================================
 * 1  structure
 * 1 ============================================================
 */


struct sw_antenna_switch {
	u8		double_chk_flag;
	/*@If current antenna RSSI > "RSSI_CHECK_THRESHOLD", than*/
	/*@check this antenna again*/
	u8		try_flag;
	s32		pre_rssi;
	u8		cur_antenna;
	u8		pre_ant;
	u8		rssi_trying;
	u8		reset_idx;
	u8		train_time;
	u8		train_time_flag;
	/*@base on RSSI difference between two antennas*/
	struct phydm_timer_list	sw_antdiv_timer;
	u32		pkt_cnt_sw_ant_div_by_ctrl_frame;
	boolean		is_sw_ant_div_by_ctrl_frame;

#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
#if USE_WORKITEM
	RT_WORK_ITEM	phydm_sw_antenna_switch_workitem;
#endif
#endif

	/* @AntDect (Before link Antenna Switch check) need to be moved*/
	u16		single_ant_counter;
	u16		dual_ant_counter;
	u16		aux_fail_detec_counter;
	u16		retry_counter;
	u8		swas_no_link_state;
	u32		swas_no_link_bk_reg948;
	boolean		ANTA_ON;	/*To indicate ant A is or not*/
	boolean		ANTB_ON;	/*@To indicate ant B is on or not*/
	boolean		pre_aux_fail_detec;
	boolean		rssi_ant_dect_result;
	u8		ant_5g;
	u8		ant_2g;
};

#if (DM_ODM_SUPPORT_TYPE & (ODM_AP))
#if (defined(CONFIG_PHYDM_ANTENNA_DIVERSITY))
struct _BF_DIV_COEX_ {
	boolean w_bfer_client[ODM_ASSOCIATE_ENTRY_NUM];
	boolean w_bfee_client[ODM_ASSOCIATE_ENTRY_NUM];
	u32 MA_rx_TP[ODM_ASSOCIATE_ENTRY_NUM];
	u32 MA_rx_TP_DIV[ODM_ASSOCIATE_ENTRY_NUM];

	u8 bd_ccoex_type_wbfer;
	u8 num_txbfee_client;
	u8 num_txbfer_client;
	u8 bdc_try_counter;
	u8 bdc_hold_counter;
	u8 bdc_mode;
	u8 bdc_active_mode;
	u8 BDC_state;
	u8 bdc_rx_idle_update_counter;
	u8 num_client;
	u8 pre_num_client;
	u8 num_bf_tar;
	u8 num_div_tar;

	boolean is_all_div_sta_idle;
	boolean is_all_bf_sta_idle;
	boolean bdc_try_flag;
	boolean BF_pass;
	boolean DIV_pass;
};
#endif
#endif

struct phydm_fat_struct {
	u8	bssid[6];
	u8	antsel_rx_keep_0;
	u8	antsel_rx_keep_1;
	u8	antsel_rx_keep_2;
	u8	antsel_rx_keep_3;
	u32	ant_sum_rssi[7];
	u32	ant_rssi_cnt[7];
	u32	ant_ave_rssi[7];
	u8	fat_state;
	u8	fat_state_cnt;
	u32	train_idx;
	u8	antsel_a[ODM_ASSOCIATE_ENTRY_NUM];
	u8	antsel_b[ODM_ASSOCIATE_ENTRY_NUM];
	u8	antsel_c[ODM_ASSOCIATE_ENTRY_NUM];
	u16	main_ht_cnt[HT_IDX];
	u16	aux_ht_cnt[HT_IDX];
	u16	main_vht_cnt[VHT_IDX];
	u16	aux_vht_cnt[VHT_IDX];
	u16	main_sum[ODM_ASSOCIATE_ENTRY_NUM];
	u16	aux_sum[ODM_ASSOCIATE_ENTRY_NUM];
	u16	main_cnt[ODM_ASSOCIATE_ENTRY_NUM];
	u16	aux_cnt[ODM_ASSOCIATE_ENTRY_NUM];
	u16	main_sum_cck[ODM_ASSOCIATE_ENTRY_NUM];
	u16	aux_sum_cck[ODM_ASSOCIATE_ENTRY_NUM];
	u16	main_cnt_cck[ODM_ASSOCIATE_ENTRY_NUM];
	u16	aux_cnt_cck[ODM_ASSOCIATE_ENTRY_NUM];
	u8	rx_idle_ant;
	u8	rx_idle_ant2;
	u32	rvrt_val; /*all rvrt_val for pause API must set to u32*/
	u8	ant_div_on_off;
	u8	div_path_type;
	boolean	is_become_linked;
	boolean get_stats;
	u32	min_max_rssi;
	u8	idx_ant_div_counter_2g;
	u8	idx_ant_div_counter_5g;
	u8	ant_div_2g_5g;

#ifdef ODM_EVM_ENHANCE_ANTDIV
	/*@For 1SS RX phy rate*/
	u32	main_evm_sum[ODM_ASSOCIATE_ENTRY_NUM];
	u32	aux_evm_sum[ODM_ASSOCIATE_ENTRY_NUM];
	u32	main_evm_cnt[ODM_ASSOCIATE_ENTRY_NUM];
	u32	aux_evm_cnt[ODM_ASSOCIATE_ENTRY_NUM];

	/*@For 2SS RX phy rate*/
	u32	main_evm_2ss_sum[ODM_ASSOCIATE_ENTRY_NUM][2];/*@2SS with A1+B*/
	u32	aux_evm_2ss_sum[ODM_ASSOCIATE_ENTRY_NUM][2];/*@2SS with A2+B*/
	u32	main_evm_2ss_cnt[ODM_ASSOCIATE_ENTRY_NUM];
	u32	aux_evm_2ss_cnt[ODM_ASSOCIATE_ENTRY_NUM];

	boolean	evm_method_enable;
	u8	target_ant_evm;
	u8	target_ant_crc32;
	u8	target_ant_tp;
	u8	target_ant_enhance;
	u8	pre_target_ant_enhance;
	u16	main_mpdu_ok_cnt;
	u16	aux_mpdu_ok_cnt;

	u32	crc32_ok_cnt;
	u32	crc32_fail_cnt;
	u32	main_crc32_ok_cnt;
	u32	aux_crc32_ok_cnt;
	u32	main_crc32_fail_cnt;
	u32	aux_crc32_fail_cnt;

	u32	main_tp;
	u32	aux_tp;
	u32	main_tp_cnt;
	u32	aux_tp_cnt;

	u8	pre_antdiv_rssi;
	u8	pre_antdiv_tp;
#endif
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN | ODM_CE | ODM_IOT))
	u32    cck_ctrl_frame_cnt_main;
	u32    cck_ctrl_frame_cnt_aux;
	u32    ofdm_ctrl_frame_cnt_main;
	u32    ofdm_ctrl_frame_cnt_aux;
	u32	main_ctrl_sum;
	u32	aux_ctrl_sum;
	u32	main_ctrl_cnt;
	u32	aux_ctrl_cnt;
#endif

	u8	b_fix_tx_ant;
	boolean	fix_ant_bfee;
	boolean	enable_ctrl_frame_antdiv;
	boolean	use_ctrl_frame_antdiv;
	boolean	*is_no_csi_feedback;
	boolean	force_antdiv_type;
	u8	antdiv_type_dbg;
	u8	hw_antsw_occur;
	u8	*p_force_tx_by_desc;
	u8	force_tx_by_desc;
	/*@A temp value, will hook to driver team's outer parameter later*/
	u8	*p_default_s0_s1;
	u8	default_s0_s1;
	u8 ant_idx_vec[3]; /* for SP3T only, added by Jiao Qi on June.6,2020*/


};

/* @1 ============================================================
 * 1  enumeration
 * 1 ============================================================
 */

enum fat_state /*@Fast antenna training*/
{
	FAT_BEFORE_LINK_STATE	= 0,
	FAT_PREPARE_STATE			= 1,
	FAT_TRAINING_STATE		= 2,
	FAT_DECISION_STATE		= 3
};

enum ant_div_type {
	NO_ANTDIV			= 0xFF,
	CG_TRX_HW_ANTDIV			= 0x01,
	CGCS_RX_HW_ANTDIV		= 0x02,
	FIXED_HW_ANTDIV		= 0x03,
	CG_TRX_SMART_ANTDIV	= 0x04,
	CGCS_RX_SW_ANTDIV	= 0x05,
	S0S1_SW_ANTDIV	= 0x06, /*@8723B intrnal switch S0 S1*/
	S0S1_TRX_HW_ANTDIV	= 0x07, /*TRX S0S1 diversity for 8723D*/
	HL_SW_SMART_ANT_TYPE1	= 0x10,
	/*@Hong-Lin Smart antenna use for 8821AE which is a 2 ant. entitys,*/
	/*@and each ant. is equipped with 4 antenna patterns*/
	HL_SW_SMART_ANT_TYPE2	= 0x11
	/*@Hong-Bo Smart antenna use for 8822B which is a 2 ant. entitys*/
};

/* @1 ============================================================
 * 1  function prototype
 * 1 ============================================================
 */

void odm_stop_antenna_switch_dm(void *dm_void);

void phydm_enable_antenna_diversity(void *dm_void);

void odm_set_ant_config(void *dm_void, u8 ant_setting /* @0=A, 1=B, 2=C,....*/
			);

#define sw_ant_div_rest_after_link odm_sw_ant_div_rest_after_link

void odm_sw_ant_div_rest_after_link(void *dm_void);

void odm_ant_div_on_off(void *dm_void, u8 swch, u8 path);

void odm_tx_by_tx_desc_or_reg(void *dm_void, u8 swch);

#if (defined(CONFIG_PHYDM_ANTENNA_DIVERSITY))

void phydm_antdiv_reset_statistic(void *dm_void, u32 macid);

void odm_update_rx_idle_ant(void *dm_void, u8 ant);

void odm_update_rx_idle_ant_sp3t(void *dm_void, u8 ant);

void phydm_update_rx_idle_ant_pathb(void *dm_void, u8 ant);

void phydm_set_antdiv_val(void *dm_void, u32 *val_buf,	u8 val_len);

#if (RTL8723B_SUPPORT == 1)
void odm_update_rx_idle_ant_8723b(void *dm_void, u8 ant, u32 default_ant,
				  u32 optional_ant);
#endif

#if (RTL8188F_SUPPORT == 1)
void phydm_update_rx_idle_antenna_8188F(void *dm_void,	u32 default_ant);
#endif

#if (RTL8723D_SUPPORT == 1)

void phydm_set_tx_ant_pwr_8723d(void *dm_void, u8 ant);

void odm_update_rx_idle_ant_8723d(void *dm_void, u8 ant, u32 default_ant,
				  u32 optional_ant);

#endif

#ifdef CONFIG_S0S1_SW_ANTENNA_DIVERSITY

#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
void odm_sw_antdiv_callback(struct phydm_timer_list *timer);

void odm_sw_antdiv_workitem_callback(void *context);

#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)

void odm_sw_antdiv_workitem_callback(void *context);

void odm_sw_antdiv_callback(void *function_context);

#elif (DM_ODM_SUPPORT_TYPE == ODM_IOT)

void odm_sw_antdiv_callback(void *dm_void);

#endif

void odm_s0s1_sw_ant_div_by_ctrl_frame(void *dm_void, u8 step);

void odm_antsel_statistics_ctrl(void *dm_void,	u8 antsel_tr_mux,
				u32 rx_pwdb_all);

void odm_s0s1_sw_ant_div_by_ctrl_frame_process_rssi(void *dm_void,
						    void *phy_info_void,
						    void *pkt_info_void);

#endif

#ifdef ODM_EVM_ENHANCE_ANTDIV
void phydm_evm_sw_antdiv_init(void *dm_void);

void phydm_rx_rate_for_antdiv(void *dm_void, void *pkt_info_void);

void phydm_antdiv_reset_rx_rate(void *dm_void);

#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
void phydm_evm_antdiv_callback(struct phydm_timer_list *timer);

void phydm_evm_antdiv_workitem_callback(void *context);

#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)
void phydm_evm_antdiv_callback(void *dm_void);

void phydm_evm_antdiv_workitem_callback(void *context);

#else
void phydm_evm_antdiv_callback(void *dm_void);
#endif

#endif

void odm_hw_ant_div(void *dm_void);

#if (defined(CONFIG_5G_CG_SMART_ANT_DIVERSITY)) ||\
	(defined(CONFIG_2G_CG_SMART_ANT_DIVERSITY))
void odm_fast_ant_training(
	void *dm_void);

void odm_fast_ant_training_callback(void *dm_void);

void odm_fast_ant_training_work_item_callback(void *dm_void);
#endif

void odm_ant_div_init(void *dm_void);

void odm_ant_div(void *dm_void);

void odm_antsel_statistics(void *dm_void, void *phy_info_void,
			   u8 antsel_tr_mux, u32 mac_id, u32 utility, u8 method,
			   u8 is_cck_rate);

void odm_process_rssi_for_ant_div(void *dm_void, void *phy_info_void,
				  void *pkt_info_void);

#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN | ODM_CE))
void odm_set_tx_ant_by_tx_info(void *dm_void,	 u8 *desc, u8 mac_id);

#elif (DM_ODM_SUPPORT_TYPE == ODM_AP)

struct tx_desc;
/*@declared tx_desc here or compile error happened when enabled 8822B*/

void odm_set_tx_ant_by_tx_info(struct rtl8192cd_priv *priv,
			       struct tx_desc *pdesc, unsigned short aid);

#if 1 /*@def def CONFIG_WLAN_HAL*/
void odm_set_tx_ant_by_tx_info_hal(struct rtl8192cd_priv *priv,
				   void *pdesc_data, u16 aid);
#endif /*@#ifdef CONFIG_WLAN_HAL*/
#endif

void odm_ant_div_config(void *dm_void);

void odm_ant_div_timers(void *dm_void, u8 state);

void phydm_antdiv_debug(void *dm_void, char input[][16], u32 *_used,
			char *output, u32 *_out_len);

void odm_ant_div_reset(void *dm_void);

void odm_antenna_diversity_init(void *dm_void);

void odm_antenna_diversity(void *dm_void);
#endif /*@#ifdef CONFIG_PHYDM_ANTENNA_DIVERSITY*/
#endif /*@#ifndef	__ODMANTDIV_H__*/