rtl8812au-chinawrj/include/cmn_info/rtw_sta_info.h
2019-05-24 21:43:57 +02:00

258 lines
8.0 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
/*This header file is for all driver teams to use the same station info.
If you want to change this file please make sure notify all driver teams maintainers.*/
/*Created by YuChen 20170301*/
#ifndef __INC_RTW_STA_INFO_H
#define __INC_RTW_STA_INFO_H
/*--------------------Define ---------------------------------------*/
#define STA_DM_CTRL_ACTIVE BIT(0)
#define STA_DM_CTRL_CFO_TRACKING BIT(1)
#ifdef CONFIG_BEAMFORMING
#define BEAMFORMING_HT_BEAMFORMER_ENABLE BIT(0) /*Declare sta support beamformer*/
#define BEAMFORMING_HT_BEAMFORMEE_ENABLE BIT(1) /*Declare sta support beamformee*/
#define BEAMFORMING_HT_BEAMFORMER_TEST BIT(2) /*Transmiting Beamforming no matter the target supports it or not*/
#define BEAMFORMING_HT_BEAMFORMER_STEER_NUM (BIT(4)|BIT(5)) /*Sta Bfer's capability*/
#define BEAMFORMING_HT_BEAMFORMEE_CHNL_EST_CAP (BIT(6)|BIT(7)) /*Sta BFee's capability*/
#define BEAMFORMING_VHT_BEAMFORMER_ENABLE BIT(0) /*Declare sta support beamformer*/
#define BEAMFORMING_VHT_BEAMFORMEE_ENABLE BIT(1) /*Declare sta support beamformee*/
#define BEAMFORMING_VHT_MU_MIMO_AP_ENABLE BIT(2) /*Declare sta support MU beamformer*/
#define BEAMFORMING_VHT_MU_MIMO_STA_ENABLE BIT(3) /*Declare sta support MU beamformer*/
#define BEAMFORMING_VHT_BEAMFORMER_TEST BIT(4) /*Transmiting Beamforming no matter the target supports it or not*/
#define BEAMFORMING_VHT_BEAMFORMER_STS_CAP (BIT(8)|BIT(9)|BIT(10)) /*Sta BFee's capability*/
#define BEAMFORMING_VHT_BEAMFORMEE_SOUND_DIM (BIT(12)|BIT(13)|BIT(14)) /*Sta Bfer's capability*/
#endif
#define HT_STBC_EN BIT(0)
#define VHT_STBC_EN BIT(1)
#define HT_LDPC_EN BIT(0)
#define VHT_LDPC_EN BIT(1)
#define SM_PS_STATIC 0
#define SM_PS_DYNAMIC 1
#define SM_PS_INVALID 2
#define SM_PS_DISABLE 3
/*cmn_sta_info.ra_sta_info.txrx_state*/
#define TX_STATE 0
#define RX_STATE 1
#define BI_DIRECTION_STATE 2
/*--------------------Define Enum-----------------------------------*/
enum channel_width {
CHANNEL_WIDTH_20 = 0,
CHANNEL_WIDTH_40 = 1,
CHANNEL_WIDTH_80 = 2,
CHANNEL_WIDTH_160 = 3,
CHANNEL_WIDTH_80_80 = 4,
CHANNEL_WIDTH_5 = 5,
CHANNEL_WIDTH_10 = 6,
CHANNEL_WIDTH_MAX = 7,
};
enum rf_type {
RF_1T1R = 0,
RF_1T2R = 1,
RF_2T2R = 2,
RF_2T3R = 3,
RF_2T4R = 4,
RF_3T3R = 5,
RF_3T4R = 6,
RF_4T4R = 7,
RF_TYPE_MAX,
};
enum bb_path {
BB_PATH_A = 0x00000001,
BB_PATH_B = 0x00000002,
BB_PATH_C = 0x00000004,
BB_PATH_D = 0x00000008,
BB_PATH_AB = (BB_PATH_A | BB_PATH_B),
BB_PATH_AC = (BB_PATH_A | BB_PATH_C),
BB_PATH_AD = (BB_PATH_A | BB_PATH_D),
BB_PATH_BC = (BB_PATH_B | BB_PATH_C),
BB_PATH_BD = (BB_PATH_B | BB_PATH_D),
BB_PATH_CD = (BB_PATH_C | BB_PATH_D),
BB_PATH_ABC = (BB_PATH_A | BB_PATH_B | BB_PATH_C),
BB_PATH_ABD = (BB_PATH_A | BB_PATH_B | BB_PATH_D),
BB_PATH_ACD = (BB_PATH_A | BB_PATH_C | BB_PATH_D),
BB_PATH_BCD = (BB_PATH_B | BB_PATH_C | BB_PATH_D),
BB_PATH_ABCD = (BB_PATH_A | BB_PATH_B | BB_PATH_C | BB_PATH_D),
};
enum rf_path {
RF_PATH_A = 0,
RF_PATH_B = 1,
RF_PATH_C = 2,
RF_PATH_D = 3,
RF_PATH_AB,
RF_PATH_AC,
RF_PATH_AD,
RF_PATH_BC,
RF_PATH_BD,
RF_PATH_CD,
RF_PATH_ABC,
RF_PATH_ABD,
RF_PATH_ACD,
RF_PATH_BCD,
RF_PATH_ABCD,
};
enum rf_syn {
RF_SYN0 = 0,
RF_SYN1 = 1,
};
enum wireless_set {
WIRELESS_CCK = 0x00000001,
WIRELESS_OFDM = 0x00000002,
WIRELESS_HT = 0x00000004,
WIRELESS_VHT = 0x00000008,
};
/*--------------------Define MACRO---------------------------------*/
/*--------------------Define Struct-----------------------------------*/
#ifdef CONFIG_BEAMFORMING
struct bf_cmn_info {
u8 ht_beamform_cap; /*Sta capablity*/
u16 vht_beamform_cap; /*Sta capablity*/
u16 p_aid;
u8 g_id;
};
#endif
struct rssi_info {
s8 rssi;
s8 rssi_cck;
s8 rssi_ofdm;
u8 packet_map;
u8 ofdm_pkt_cnt;
u8 cck_pkt_cnt;
u16 cck_sum_power;
u8 is_send_rssi;
u8 valid_bit;
s16 rssi_acc; /*accumulate RSSI for per packet MA sum*/
};
struct ra_sta_info {
u8 rate_id; /*[PHYDM] ratr_idx*/
u8 rssi_level; /*[PHYDM]*/
u8 is_first_connect:1; /*[PHYDM] CE: ra_rpt_linked, AP: H2C_rssi_rpt*/
u8 is_support_sgi:1; /*[driver]*/
u8 is_vht_enable:2; /*[driver]*/
u8 disable_ra:1; /*[driver]*/
u8 disable_pt:1; /*[driver] remove is_disable_power_training*/
u8 txrx_state:2; /*[PHYDM] 0: Tx, 1:Rx, 2:bi-direction*/
u8 is_noisy:1; /*[PHYDM]*/
u8 curr_tx_rate; /*[PHYDM] FW->Driver*/
enum channel_width ra_bw_mode; /*[Driver] max bandwidth, for RA only*/
enum channel_width curr_tx_bw; /*[PHYDM] FW->Driver*/
u8 curr_retry_ratio; /*[PHYDM] FW->Driver*/
u64 ramask;
};
struct dtp_info {
u8 dyn_tx_power; /*Dynamic Tx power offset*/
u8 last_tx_power;
u8 sta_tx_high_power_lvl:4;
u8 sta_last_dtp_lvl:4;
};
struct cmn_sta_info {
u16 dm_ctrl; /*[Driver]*/
enum channel_width bw_mode; /*[Driver] max support BW*/
u8 mac_id; /*[Driver]*/
u8 mac_addr[6]; /*[Driver]*/
u16 aid; /*[Driver]*/
enum rf_type mimo_type; /*[Driver] sta XTXR*/
struct rssi_info rssi_stat; /*[PHYDM]*/
struct ra_sta_info ra_info; /*[Driver&PHYDM]*/
u16 tx_moving_average_tp; /*[Driver] tx average MBps*/
u16 rx_moving_average_tp; /*[Driver] rx average MBps*/
u8 stbc_en:2; /*[Driver] really transmitt STBC*/
u8 ldpc_en:2; /*[Driver] really transmitt LDPC*/
enum wireless_set support_wireless_set;/*[Driver]*/
#ifdef CONFIG_BEAMFORMING
struct bf_cmn_info bf_info; /*[Driver]*/
#endif
u8 sm_ps:2; /*[Driver]*/
struct dtp_info dtp_stat; /*[PHYDM] Dynamic Tx power offset*/
/*u8 pw2cca_over_TH_cnt;*/
/*u8 total_pw2cca_cnt;*/
};
struct phydm_phyinfo_struct {
u8 rx_pwdb_all;
u8 signal_quality; /* OFDM: signal_quality=rx_mimo_signal_quality[0], CCK: signal qualityin 0-100 index. */
u8 rx_mimo_signal_strength[4]; /* RSSI in 0~100 index */
s8 rx_mimo_signal_quality[4]; /* OFDM: per-path's EVM translate to 0~100% , no used for CCK*/
u8 rx_mimo_evm_dbm[4]; /* per-path's original EVM (dbm) */
s16 cfo_short[4]; /* per-path's cfo_short */
s16 cfo_tail[4]; /* per-path's cfo_tail */
s8 rx_power; /* in dBm Translate from PWdB */
s8 recv_signal_power; /* Real power in dBm for this packet, no beautification and aggregation. Keep this raw info to be used for the other procedures. */
u8 bt_rx_rssi_percentage;
u8 signal_strength; /* in 0-100 index. */
s8 rx_pwr[4]; /* per-path's pwdb */
s8 rx_snr[4]; /* per-path's SNR */
u8 ant_idx[4]; /*per-path's antenna index*/
/*ODM_PHY_STATUS_NEW_TYPE_SUPPORT*/
u8 rx_count:2; /* RX path counter---*/
u8 band_width:2;
u8 rxsc:4; /* sub-channel---*/
u8 channel; /* channel number---*/
u8 is_mu_packet:1; /* is MU packet or not---boolean*/
u8 is_beamformed:1; /* BF packet---boolean*/
u8 cnt_pw2cca;
u8 cnt_cca2agc_rdy;
/*ODM_PHY_STATUS_NEW_TYPE_SUPPORT*/
};
struct phydm_perpkt_info_struct {
u8 data_rate;
u8 station_id;
u8 is_cck_rate: 1;
u8 rate_ss:3; /*spatial stream of data rate*/
u8 is_packet_match_bssid:1; /*boolean*/
u8 is_packet_to_self:1; /*boolean*/
u8 is_packet_beacon:1; /*boolean*/
u8 is_to_self:1; /*boolean*/
u8 ppdu_cnt;
};
/*--------------------Export global variable----------------------------*/
/*--------------------Function declaration-----------------------------*/
#endif