mirror of
https://github.com/chinawrj/rtl8812au
synced 2024-11-10 08:07:18 +00:00
[MIRROR] RTL8812AU/21AU and RTL8814AU driver with monitor mode and frame injection
https://axenov.dev/как-установить-драйвер-wi-fi-адаптера-dexp-wfa-601-н/
7cc2750d00
Merge changes |
||
---|---|---|
core | ||
hal | ||
include | ||
os_dep | ||
platform | ||
.gitignore | ||
dkms-install.sh | ||
dkms-remove.sh | ||
dkms.conf | ||
Kconfig | ||
LICENSE | ||
Makefile | ||
README.md | ||
Realtek_Changelog.txt |
rtl8812au
Realtek 8812AU driver v5.2.20.2 with monitor mode and frame injection
This driver supports 8812au & 8821au chipsets, not the 8814au chipset.
Building / Installing
To build and install module manually:
$ "make" will build the 8812au, while "make RTL8821=1" will build the 8821au driver
$ sudo make install
To use DKMS install:
$ sudo ./dkms-install.sh
To use DKMS uninstall and remove:
$ sudo ./dkms-remove.sh
Notes
Download
git clone -b v5.2.20 https://github.com/aircrack-ng/rtl8812au.git
cd rtl*
Package / Build dependencies (Kali)
sudo apt-get install build-essential
sudo apt-get install bc
sudo apt-get install libelf-dev
sudo apt-get install dkms
sudo apt-get install linux-headers-`uname -r`
Building for Raspberry (RPI) also needs
sudo apt install raspberrypi-kernel-headers
For setting monitor mode
- Fix problematic interference in monitor mode.
airmon-ng check kill
You may also uncheck the box "Automatically connect to this network when it is avaiable" in nm-connection-editor. This only works if you have a saved wifi connection.
- Set interface down
sudo ip link set wlan0 down
- Set monitor mode
sudo iw dev wlan0 set type monitor
- Set interface up
sudo ip link set wlan0 up
LED control
You can now control LED behaviour statically by Makefile, for example:
CONFIG_LED_ENABLE = n
value can be y or n
statically by module parameter in /etc/modprobe.d/8812au.conf or wherever, for example:
options 8812au rtw_led_enable=0
value can be 0 or 1
or dynamically by writing to /proc/net/rtl8812au/$(your interface name)/led_enable, for example:
$ echo "0" > /proc/net/rtl8812au/$(your interface name)/led_enable
value can be 0 or 1
check current value:
$ cat /proc/net/rtl8812au/$(your interface name)/led_enable
NetworkManager
Newer versions of NetworkManager switches to random MAC address. Some users would prefer to use a fixed address. Simply add these lines below
[device]
wifi.scan-rand-mac-address=no
at the end of file /etc/NetworkManager/NetworkManager.conf and restart NetworkManager with the command:
sudo service NetworkManager restart