[MIRROR] RTL8812AU/21AU and RTL8814AU driver with monitor mode and frame injection https://axenov.dev/как-установить-драйвер-wi-fi-адаптера-dexp-wfa-601-н/
Go to file
2019-08-17 14:32:08 +02:00
core Fix ieee80211.h linux capabilities 2019-08-17 14:32:08 +02:00
docs Fix ieee80211.h linux capabilities 2019-08-17 14:32:08 +02:00
hal Fix wrong type in rtw_dump_cur_efuse 2019-08-17 13:46:26 +02:00
include Fix ieee80211.h linux capabilities 2019-08-17 14:32:08 +02:00
os_dep Added DEBUG to USB - CONFIG_USB_DEBUG in Makefile 2019-08-17 13:09:09 +02:00
platform Pushing minor cleanups .. 2019-08-16 22:49:56 +02:00
WiFi_Direct_User_Interface Upload new v5.6.4 driver 2019-05-24 21:43:57 +02:00
.gitignore Added .gitignore 2018-06-22 21:56:12 +02:00
.travis.yml Merge branch 'v5.3.4' into v5.3.4 2019-05-24 19:05:11 +02:00
dkms-install.sh Upload new v5.6.4.1 branch 2019-06-22 15:16:29 +02:00
dkms-remove.sh Upload new v5.6.4.1 branch 2019-06-22 15:16:29 +02:00
dkms.conf Added kernel v5.3+ support - enjoy 2019-08-16 23:44:50 +02:00
Kconfig Added HT Greenfield capab + various ported fixes 2019-06-22 17:07:31 +02:00
LICENSE Uploading new v5.3.4 2018-08-25 18:21:32 +02:00
Makefile Add cfg80211 dependency for openwrt 2019-08-17 13:47:37 +02:00
README.md Update README.md 2019-06-22 17:27:32 +02:00
ReleaseNotes.pdf Upload new v5.6.4.1 branch 2019-06-22 15:16:29 +02:00

RTL8812AU/21AU and RTL8814AU drivers

Monitor mode Frame Injection GitHub version GitHub issues GitHub forks GitHub stars GitHub license
Kali Arch Armbian ArchLinux aircrack-ng wifite2

TODO

This driver is brand new, it will take some time to add all patches from v5.3.4 even though many got merged into it.

This driver only supports 8812au chipset at the moment. We're working on it, so please be patient. Thanks

DKMS

This driver can be installed using [DKMS]. This is a system which will automatically recompile and install a kernel module when a new kernel gets installed or updated. To make use of DKMS, install the dkms package, which on Debian (based) systems is done like this:

sudo apt-get install dkms

Installation of Driver

In order to install the driver open a terminal in the directory with the source code and execute the following command:

sudo ./dkms-install.sh

Removal of Driver

In order to remove the driver from your system open a terminal in the directory with the source code and execute the following command:

sudo ./dkms-remove.sh

Make

For building & installing the driver with 'make' use

make
make install

Notes

Download

git clone -b v5.6.4.1 https://github.com/aircrack-ng/rtl8812au.git
cd rtl*

Package / Build dependencies (Kali)

sudo apt-get install build-essential
sudo apt-get install bc
sudo apt-get install libelf-dev
sudo apt-get install linux-headers-`uname -r`

For Raspberry (RPI)

sudo apt-get install bc raspberrypi-kernel-headers

Then run this step to change platform in Makefile, For RPI 2/3:

$ sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile
$ sed -i 's/CONFIG_PLATFORM_ARM_RPI = n/CONFIG_PLATFORM_ARM_RPI = y/g' Makefile

But for RPI 3 B+ you will need to run those below which builds the ARM64 arch driver:

$ sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile
$ sed -i 's/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g' Makefile

For setting monitor mode

  1. Fix problematic interference in monitor mode.
airmon-ng check kill

You may also uncheck the box "Automatically connect to this network when it is avaiable" in nm-connection-editor. This only works if you have a saved wifi connection.

  1. Set interface down
sudo ip link set wlan0 down
  1. Set monitor mode
sudo iw dev wlan0 set type monitor
  1. Set interface up
sudo ip link set wlan0 up

For setting TX power

sudo iw wlan0 set txpower fixed 3000

LED control

You can now control LED behaviour statically by Makefile, for example:

CONFIG_LED_ENABLE = n

value can be y or n

statically by module parameter in /etc/modprobe.d/8812au.conf or wherever, for example:

options 88XXau rtw_led_enable=0

value can be 0 or 1

or dynamically by writing to /proc/net/rtl8812au/$(your interface name)/led_enable, for example:

$ echo "0" > /proc/net/rtl8812au/$(your interface name)/led_enable

value can be 0 or 1

check current value:

$ cat /proc/net/rtl8812au/$(your interface name)/led_enable

NetworkManager

Newer versions of NetworkManager switches to random MAC address. Some users would prefer to use a fixed address. Simply add these lines below

[device]
wifi.scan-rand-mac-address=no

at the end of file /etc/NetworkManager/NetworkManager.conf and restart NetworkManager with the command:

sudo service NetworkManager restart