rtl8812au-chinawrj

mirror of https://github.com/chinawrj/rtl8812au synced 2024-11-27 15:44:18 +00:00

[MIRROR] RTL8812AU/21AU and RTL8814AU driver with monitor mode and frame injection https://axenov.dev/как-установить-драйвер-wi-fi-адаптера-dexp-wfa-601-н/

Go to file

Christian B 362e6391aa Merge pull request #175 from kimocoder/v5.2.20 Merge changes		2018-08-18 16:02:51 +02:00
core	fixed scan timeout interfering with normal scan	2018-08-18 14:45:43 +02:00
hal	minor debug trace fix	2018-08-14 16:18:16 +02:00
include	Use DEBUG=1 to enable debug messages, DEBUG=2 to enable trace messages	2018-08-05 20:40:03 +02:00
os_dep	fixed crash when debug flag is set	2018-08-12 17:52:01 +02:00
platform
.gitignore
dkms-install.sh
dkms-remove.sh
dkms.conf	Add new VHT MP HW TX mode on 8814au	2018-08-12 15:49:08 +02:00
Kconfig	Kconfig alignement	2018-08-05 20:52:37 +02:00
LICENSE
Makefile	Cleaned up the VHT MP HW TX MODE settings	2018-08-12 19:07:18 +02:00
README.md	Update README.md	2018-08-05 20:49:12 +02:00
Realtek_Changelog.txt	Allow build for kernels with backported cfg80211 API	2018-08-08 19:03:15 +02:00

README.md

RTL8812AU/21AU and RTL8814AU drivers

with monitor mode and frame injection

DKMS

This driver can be installed using [DKMS]. This is a system which will automatically recompile and install a kernel module when a new kernel gets installed or updated. To make use of DKMS, install the dkms package, which on Debian (based) systems is done like this:

sudo apt-get install dkms

Installation of Driver

In order to install the driver open a terminal in the directory with the source code and execute the following command:

sudo ./dkms-install.sh

Removal of Driver

In order to remove the driver from your system open a terminal in the directory with the source code and execute the following command:

sudo ./dkms-remove.sh

Make

For building & installing the driver with 'make' use

make
make install

Notes

Download

git clone -b v5.2.20 https://github.com/aircrack-ng/rtl8812au.git
cd rtl*

Package / Build dependencies (Kali)

sudo apt-get install build-essential
sudo apt-get install bc
sudo apt-get install libelf-dev
sudo apt-get install linux-headers-`uname -r`

For Raspberry (RPI)

sudo apt-get install raspberrypi-kernel-headers

For setting monitor mode

Fix problematic interference in monitor mode.

airmon-ng check kill

You may also uncheck the box "Automatically connect to this network when it is avaiable" in nm-connection-editor. This only works if you have a saved wifi connection.

Set interface down

sudo ip link set wlan0 down

Set monitor mode

sudo iw dev wlan0 set type monitor

Set interface up

sudo ip link set wlan0 up

For setting TX power

sudo iw wlan0 set txpower fixed 3000

LED control

You can now control LED behaviour statically by Makefile, for example:

CONFIG_LED_ENABLE = n

value can be y or n

statically by module parameter in /etc/modprobe.d/8812au.conf or wherever, for example:

options 88XXau rtw_led_enable=0

value can be 0 or 1

or dynamically by writing to /proc/net/rtl8812au/$(your interface name)/led_enable, for example:

$ echo "0" > /proc/net/rtl8812au/$(your interface name)/led_enable

value can be 0 or 1

check current value:

$ cat /proc/net/rtl8812au/$(your interface name)/led_enable

NetworkManager

Newer versions of NetworkManager switches to random MAC address. Some users would prefer to use a fixed address. Simply add these lines below

[device]
wifi.scan-rand-mac-address=no

at the end of file /etc/NetworkManager/NetworkManager.conf and restart NetworkManager with the command:

sudo service NetworkManager restart