rtl8812au-chinawrj/include/drv_conf.h
2019-10-31 01:43:41 +01:00

514 lines
14 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#ifndef __DRV_CONF_H__
#define __DRV_CONF_H__
#include "autoconf.h"
#include "hal_ic_cfg.h"
#if defined(PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
#error "Shall be Linux or Windows, but not both!\n"
#endif
#define CONFIG_RSSI_PRIORITY
#ifdef CONFIG_RTW_REPEATER_SON
#ifndef CONFIG_AP
#define CONFIG_AP
#endif
#ifndef CONFIG_CONCURRENT_MODE
#define CONFIG_CONCURRENT_MODE
#endif
#ifndef CONFIG_BR_EXT
#define CONFIG_BR_EXT
#endif
#ifndef CONFIG_RTW_REPEATER_SON_ID
#define CONFIG_RTW_REPEATER_SON_ID 0x02040608
#endif
//#define CONFIG_RTW_REPEATER_SON_ROOT
#ifndef CONFIG_RTW_REPEATER_SON_ROOT
#define CONFIG_LAYER2_ROAMING_ACTIVE
#endif
#undef CONFIG_POWER_SAVING
#endif
#if defined(CONFIG_MCC_MODE) && (!defined(CONFIG_CONCURRENT_MODE))
#error "Enable CONCURRENT_MODE before enable MCC MODE\n"
#endif
#if defined(CONFIG_MCC_MODE) && defined(CONFIG_BT_COEXIST)
#error "Disable BT COEXIST before enable MCC MODE\n"
#endif
#if defined(CONFIG_MCC_MODE) && defined(CONFIG_TDLS)
#error "Disable TDLS before enable MCC MODE\n"
#endif
#if defined(CONFIG_RTW_80211R) && !defined(CONFIG_LAYER2_ROAMING)
#error "Enable CONFIG_LAYER2_ROAMING before enable CONFIG_RTW_80211R\n"
#endif
/* Older Android kernel doesn't has CONFIG_ANDROID defined,
* add this to force CONFIG_ANDROID defined */
#ifdef CONFIG_PLATFORM_ANDROID
#ifndef CONFIG_ANDROID
#define CONFIG_ANDROID
#endif
#endif
#ifdef CONFIG_ANDROID
/* Some Android build will restart the UI while non-printable ascii is passed
* between java and c/c++ layer (JNI). We force CONFIG_VALIDATE_SSID
* for Android here. If you are sure there is no risk on your system about this,
* mask this macro define to support non-printable ascii ssid.
* #define CONFIG_VALIDATE_SSID */
/* Android expect dbm as the rx signal strength unit */
#define CONFIG_SIGNAL_DISPLAY_DBM
#endif
/*
#if defined(CONFIG_HAS_EARLYSUSPEND) && defined(CONFIG_RESUME_IN_WORKQUEUE)
#warning "You have CONFIG_HAS_EARLYSUSPEND enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
#undef CONFIG_RESUME_IN_WORKQUEUE
#endif
#if defined(CONFIG_ANDROID_POWER) && defined(CONFIG_RESUME_IN_WORKQUEUE)
#warning "You have CONFIG_ANDROID_POWER enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
#undef CONFIG_RESUME_IN_WORKQUEUE
#endif
*/
#ifdef CONFIG_RESUME_IN_WORKQUEUE /* this can be removed, because there is no case for this... */
#if !defined(CONFIG_WAKELOCK) && !defined(CONFIG_ANDROID_POWER)
#error "enable CONFIG_RESUME_IN_WORKQUEUE without CONFIG_WAKELOCK or CONFIG_ANDROID_POWER will suffer from the danger of wifi's unfunctionality..."
#error "If you still want to enable CONFIG_RESUME_IN_WORKQUEUE in this case, mask this preprossor checking and GOOD LUCK..."
#endif
#endif
/* About USB VENDOR REQ */
#if defined(CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC automatically"
#define CONFIG_USB_VENDOR_REQ_MUTEX
#endif
#if defined(CONFIG_VENDOR_REQ_RETRY) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_VENDOR_REQ_RETRY automatically"
#define CONFIG_USB_VENDOR_REQ_MUTEX
#endif
#if defined(CONFIG_DFS_SLAVE_WITH_RADAR_DETECT) && !defined(CONFIG_DFS_MASTER)
#define CONFIG_DFS_MASTER
#endif
#if !defined(CONFIG_AP_MODE) && defined(CONFIG_DFS_MASTER)
#error "enable CONFIG_DFS_MASTER without CONFIG_AP_MODE"
#endif
#ifdef CONFIG_WIFI_MONITOR
/* #define CONFIG_MONITOR_MODE_XMIT */
#endif
#ifdef CONFIG_CUSTOMER_ALIBABA_GENERAL
#ifndef CONFIG_WIFI_MONITOR
#define CONFIG_WIFI_MONITOR
#endif
#ifndef CONFIG_MONITOR_MODE_XMIT
#define CONFIG_MONITOR_MODE_XMIT
#endif
#ifdef CONFIG_POWER_SAVING
#undef CONFIG_POWER_SAVING
#endif
#endif
#ifdef CONFIG_CUSTOMER01_SMART_ANTENNA
#ifdef CONFIG_POWER_SAVING
#undef CONFIG_POWER_SAVING
#endif
#ifdef CONFIG_BEAMFORMING
#undef CONFIG_BEAMFORMING
#endif
#endif
#ifdef CONFIG_RTW_MESH
#ifndef CONFIG_RTW_MESH_ACNODE_PREVENT
#define CONFIG_RTW_MESH_ACNODE_PREVENT 1
#endif
#ifndef CONFIG_RTW_MESH_OFFCH_CAND
#define CONFIG_RTW_MESH_OFFCH_CAND 1
#endif
#ifndef CONFIG_RTW_MESH_PEER_BLACKLIST
#define CONFIG_RTW_MESH_PEER_BLACKLIST 1
#endif
#ifndef CONFIG_RTW_MESH_CTO_MGATE_BLACKLIST
#define CONFIG_RTW_MESH_CTO_MGATE_BLACKLIST 1
#endif
#ifndef CONFIG_RTW_MESH_CTO_MGATE_CARRIER
#define CONFIG_RTW_MESH_CTO_MGATE_CARRIER CONFIG_RTW_MESH_CTO_MGATE_BLACKLIST
#endif
#ifndef CONFIG_RTW_MPM_TX_IES_SYNC_BSS
#define CONFIG_RTW_MPM_TX_IES_SYNC_BSS 1
#endif
#if CONFIG_RTW_MPM_TX_IES_SYNC_BSS
#ifndef CONFIG_RTW_MESH_AEK
#define CONFIG_RTW_MESH_AEK
#endif
#endif
#ifndef CONFIG_RTW_MESH_DATA_BMC_TO_UC
#define CONFIG_RTW_MESH_DATA_BMC_TO_UC 1
#endif
#endif
#if !defined(CONFIG_SCAN_BACKOP) && defined(CONFIG_AP_MODE)
#define CONFIG_SCAN_BACKOP
#endif
#define RTW_SCAN_SPARSE_MIRACAST 1
#define RTW_SCAN_SPARSE_BG 0
#define RTW_SCAN_SPARSE_ROAMING_ACTIVE 1
#ifndef CONFIG_RTW_HIQ_FILTER
#define CONFIG_RTW_HIQ_FILTER 1
#endif
#ifndef CONFIG_RTW_ADAPTIVITY_EN
#define CONFIG_RTW_ADAPTIVITY_EN 0
#endif
#ifndef CONFIG_RTW_ADAPTIVITY_MODE
#define CONFIG_RTW_ADAPTIVITY_MODE 0
#endif
#ifndef CONFIG_RTW_ADAPTIVITY_TH_L2H_INI
#define CONFIG_RTW_ADAPTIVITY_TH_L2H_INI 0
#endif
#ifndef CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF
#define CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF 0
#endif
#ifndef CONFIG_RTW_EXCL_CHS
#define CONFIG_RTW_EXCL_CHS {0}
#endif
#ifndef CONFIG_RTW_DFS_REGION_DOMAIN
#define CONFIG_RTW_DFS_REGION_DOMAIN 0
#endif
#ifndef CONFIG_TXPWR_BY_RATE_EN
#define CONFIG_TXPWR_BY_RATE_EN 2 /* by efuse */
#endif
#ifndef CONFIG_TXPWR_LIMIT_EN
#define CONFIG_TXPWR_LIMIT_EN 2 /* by efuse */
#endif
#ifndef CONFIG_RTW_CHPLAN
#define CONFIG_RTW_CHPLAN 0xFF /* RTW_CHPLAN_UNSPECIFIED */
#endif
/* compatible with old fashion configuration */
#if defined(CONFIG_CALIBRATE_TX_POWER_BY_REGULATORY)
#undef CONFIG_TXPWR_BY_RATE_EN
#undef CONFIG_TXPWR_LIMIT_EN
#define CONFIG_TXPWR_BY_RATE_EN 1
#define CONFIG_TXPWR_LIMIT_EN 1
#elif defined(CONFIG_CALIBRATE_TX_POWER_TO_MAX)
#undef CONFIG_TXPWR_BY_RATE_EN
#undef CONFIG_TXPWR_LIMIT_EN
#define CONFIG_TXPWR_BY_RATE_EN 1
#define CONFIG_TXPWR_LIMIT_EN 0
#endif
#ifndef RTW_DEF_MODULE_REGULATORY_CERT
#define RTW_DEF_MODULE_REGULATORY_CERT 0
#endif
#if RTW_DEF_MODULE_REGULATORY_CERT
/* force enable TX power by rate and TX power limit */
#undef CONFIG_TXPWR_BY_RATE_EN
#undef CONFIG_TXPWR_LIMIT_EN
#define CONFIG_TXPWR_BY_RATE_EN 1
#define CONFIG_TXPWR_LIMIT_EN 1
#endif
#if !CONFIG_TXPWR_LIMIT && CONFIG_TXPWR_LIMIT_EN
#undef CONFIG_TXPWR_LIMIT
#define CONFIG_TXPWR_LIMIT 1
#endif
#ifdef CONFIG_RTW_IPCAM_APPLICATION
#undef CONFIG_TXPWR_BY_RATE_EN
#define CONFIG_TXPWR_BY_RATE_EN 1
#define CONFIG_RTW_CUSTOMIZE_BEEDCA 0x0000431C
#define CONFIG_RTW_CUSTOMIZE_BWMODE 0x00
#define CONFIG_RTW_CUSTOMIZE_RLSTA 0x7
#if defined(CONFIG_RTL8192E) || defined(CONFIG_RTL8192F) || defined(CONFIG_RTL8822B)
#define CONFIG_RTW_TX_2PATH_EN /* mutually incompatible with STBC_TX & Beamformer */
#endif
#endif
/*#define CONFIG_EXTEND_LOWRATE_TXOP */
#ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_1SS
#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_1SS {0xFF, 0xFF, 0xFF, 0xFF}
#endif
#ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_2SS
#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_2SS {0xFF, 0xFF, 0xFF, 0xFF}
#endif
#ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_3SS
#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_3SS {0xFF, 0xFF, 0xFF, 0xFF}
#endif
#ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_4SS
#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_4SS {0xFF, 0xFF, 0xFF, 0xFF}
#endif
#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_A
#define CONFIG_RTW_TARGET_TX_PWR_2G_A {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif
#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_B
#define CONFIG_RTW_TARGET_TX_PWR_2G_B {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif
#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_C
#define CONFIG_RTW_TARGET_TX_PWR_2G_C {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif
#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_D
#define CONFIG_RTW_TARGET_TX_PWR_2G_D {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif
#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_A
#define CONFIG_RTW_TARGET_TX_PWR_5G_A {-1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif
#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_B
#define CONFIG_RTW_TARGET_TX_PWR_5G_B {-1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif
#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_C
#define CONFIG_RTW_TARGET_TX_PWR_5G_C {-1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif
#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_D
#define CONFIG_RTW_TARGET_TX_PWR_5G_D {-1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif
#ifndef CONFIG_RTW_AMPLIFIER_TYPE_2G
#define CONFIG_RTW_AMPLIFIER_TYPE_2G 0
#endif
#ifndef CONFIG_RTW_AMPLIFIER_TYPE_5G
#define CONFIG_RTW_AMPLIFIER_TYPE_5G 0
#endif
#ifndef CONFIG_RTW_RFE_TYPE
#define CONFIG_RTW_RFE_TYPE 64
#endif
#ifndef CONFIG_RTW_GLNA_TYPE
#define CONFIG_RTW_GLNA_TYPE 0
#endif
#ifndef CONFIG_RTW_PLL_REF_CLK_SEL
#define CONFIG_RTW_PLL_REF_CLK_SEL 0x0F
#endif
#ifndef CONFIG_IFACE_NUMBER
#ifdef CONFIG_CONCURRENT_MODE
#define CONFIG_IFACE_NUMBER 2
#else
#define CONFIG_IFACE_NUMBER 1
#endif
#endif
#ifndef CONFIG_CONCURRENT_MODE
#if (CONFIG_IFACE_NUMBER > 1)
#error "CONFIG_IFACE_NUMBER over 1,but CONFIG_CONCURRENT_MODE not defined"
#endif
#endif
#if (CONFIG_IFACE_NUMBER == 0)
#error "CONFIG_IFACE_NUMBER cound not be 0 !!"
#endif
#if defined(CONFIG_RTL8188E) || defined(CONFIG_RTL8192E) || defined(CONFIG_RTL8188F) || \
defined(CONFIG_RTL8188GTV) || defined(CONFIG_RTL8192F) || \
defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8710B) || \
defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B) || defined(CONFIG_RTL8723D)
#define CONFIG_HWMPCAP_GEN1
#elif defined(CONFIG_RTL8822B) || defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8822C) /*|| defined(CONFIG_RTL8814A)*/
#define CONFIG_HWMPCAP_GEN2
#elif defined(CONFIG_RTL8814B) /*Address CAM - 128*/
#define CONFIG_HWMPCAP_GEN3
#endif
#if defined(CONFIG_HWMPCAP_GEN1) && (CONFIG_IFACE_NUMBER > 2)
#ifdef CONFIG_POWER_SAVING
/*#warning "Disable PS when CONFIG_IFACE_NUMBER > 2"*/
#undef CONFIG_POWER_SAVING
#endif
#ifdef CONFIG_WOWLAN
#error "This IC can't support MI and WoWLan at the same time"
#endif
#endif
#if (CONFIG_IFACE_NUMBER > 4)
#error "Not support over 4 interfaces yet !!"
#endif
#if (CONFIG_IFACE_NUMBER > 8) /*IFACE_ID_MAX*/
#error "HW count not support over 8 interfaces !!"
#endif
#if (CONFIG_IFACE_NUMBER > 2)
#define CONFIG_MI_WITH_MBSSID_CAM
#ifdef CONFIG_MI_WITH_MBSSID_CAM
#define CONFIG_MBSSID_CAM
#if defined(CONFIG_RUNTIME_PORT_SWITCH)
#undef CONFIG_RUNTIME_PORT_SWITCH
#endif
#endif
#ifdef CONFIG_AP_MODE
#define CONFIG_SUPPORT_MULTI_BCN
#define CONFIG_SWTIMER_BASED_TXBCN
#ifdef CONFIG_HWMPCAP_GEN2 /*CONFIG_RTL8822B/CONFIG_RTL8821C/CONFIG_RTL8822C*/
#define CONFIG_FW_HANDLE_TXBCN
#ifdef CONFIG_FW_HANDLE_TXBCN
#ifdef CONFIG_SWTIMER_BASED_TXBCN
#undef CONFIG_SWTIMER_BASED_TXBCN
#endif
#define CONFIG_LIMITED_AP_NUM 4
#endif
#endif /*CONFIG_HWMPCAP_GEN2*/
#endif /*CONFIG_AP_MODE*/
#ifdef CONFIG_HWMPCAP_GEN2 /*CONFIG_RTL8822B/CONFIG_RTL8821C/CONFIG_RTL8822C*/
#define CONFIG_CLIENT_PORT_CFG
#define CONFIG_NEW_NETDEV_HDL
#endif/*CONFIG_HWMPCAP_GEN2*/
#endif/*(CONFIG_IFACE_NUMBER > 2)*/
#define MACID_NUM_SW_LIMIT 32
#define SEC_CAM_ENT_NUM_SW_LIMIT 32
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
#define CONFIG_IEEE80211_BAND_5GHZ
#endif
#if defined(CONFIG_WOWLAN) && (defined(CONFIG_RTL8822B) || defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8814A))
#define CONFIG_WOW_PATTERN_HW_CAM
#endif
#ifndef CONFIG_TSF_UPDATE_PAUSE_FACTOR
#define CONFIG_TSF_UPDATE_PAUSE_FACTOR 200
#endif
#ifndef CONFIG_TSF_UPDATE_RESTORE_FACTOR
#define CONFIG_TSF_UPDATE_RESTORE_FACTOR 5
#endif
/*
Mark CONFIG_DEAUTH_BEFORE_CONNECT by Arvin 2015/07/20
If the failure of Wi-Fi connection is due to some irregular disconnection behavior (like unplug dongle,
power down etc.) in last time, we can unmark this flag to avoid some unpredictable response from AP.
*/
/*#define CONFIG_DEAUTH_BEFORE_CONNECT */
/*#define CONFIG_WEXT_DONT_JOIN_BYSSID */
/* #include <rtl871x_byteorder.h> */
/*#define CONFIG_DOSCAN_IN_BUSYTRAFFIC */
/*#define CONFIG_PHDYM_FW_FIXRATE */ /* Another way to fix tx rate */
/*Don't release SDIO irq in suspend/resume procedure*/
#define CONFIG_RTW_SDIO_KEEP_IRQ 0
/*
* Add by Lucas@2016/02/15
* For RX Aggregation
*/
#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_USB_RX_AGGREGATION)
#define RTW_RX_AGGREGATION
#endif /* CONFIG_SDIO_HCI || CONFIG_USB_RX_AGGREGATION */
#ifdef CONFIG_RTW_HOSTAPD_ACS
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
#ifndef CONFIG_FIND_BEST_CHANNEL
#define CONFIG_FIND_BEST_CHANNEL
#endif
#else
#ifdef CONFIG_FIND_BEST_CHANNEL
#undef CONFIG_FIND_BEST_CHANNEL
#endif
#ifndef CONFIG_RTW_ACS
#define CONFIG_RTW_ACS
#endif
#ifndef CONFIG_BACKGROUND_NOISE_MONITOR
#define CONFIG_BACKGROUND_NOISE_MONITOR
#endif
#endif
#endif
#ifdef CONFIG_RTW_80211K
#ifndef CONFIG_RTW_ACS
#define CONFIG_RTW_ACS
#endif
#endif /*CONFIG_RTW_80211K*/
#ifdef DBG_CONFIG_ERROR_RESET
#ifndef CONFIG_IPS
#define CONFIG_IPS
#endif
#endif
#ifdef RTW_REDUCE_SCAN_SWITCH_CH_TIME
#ifndef CONFIG_RTL8822B
#error "Only 8822B support RTW_REDUCE_SCAN_SWITCH_CH_TIME"
#endif
#ifndef RTW_CHANNEL_SWITCH_OFFLOAD
#define RTW_CHANNEL_SWITCH_OFFLOAD
#endif
#endif
#define CONFIG_RTW_TPT_MODE
#ifdef CONFIG_PCI_BCN_POLLING
#define CONFIG_BCN_ICF
#endif
#ifndef CONFIG_PCI_MSI
#define CONFIG_RTW_PCI_MSI_DISABLE
#endif
#endif /* __DRV_CONF_H__ */