mirrors/rtl8812au-chinawrj
1
0
Fork 0
mirror of https://github.com/chinawrj/rtl8812au synced 2024-11-09 23:57:10 +00:00
Code Issues Packages Projects Releases Wiki Activity

Some cleaning around SUPER_SPEED

Browse Source
This commit is contained in:
Christian kimocoder 2017-10-24 16:43:55 +02:00 committed by GitHub
parent 32f5d18404
commit 3406bc04c7
1 changed files with 1 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
hal/rtl8814a/usb/usb_halinit.c
View File

@ -28,7 +28,6 @@
#endif
static void _dbg_dump_macreg(_adapter *padapter)
{
u32 offset = 0;
@ -50,7 +49,6 @@ _ConfigChipOutEP_8814(
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
pHalData->OutEpQueueSel = 0;
pHalData->OutEpNumber = 0;
@ -114,17 +112,11 @@ void rtl8814au_interface_configure(_adapter *padapter)
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
if (IS_SUPER_SPEED_USB(padapter))
{
pHalData->UsbBulkOutSize = USB_SUPER_SPEED_BULK_SIZE;//1024 bytes
}
else if (IS_HIGH_SPEED_USB(padapter))
{
pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;//512 bytes
}
else
{
pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;//64 bytes
}
pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber;
@ -234,7 +226,6 @@ _InitBurstPktLen(IN PADAPTER Adapter)
}
}
VOID
_InitQueueReservedPage_8814AUsb(
IN PADAPTER Adapter
@ -273,7 +264,6 @@ _InitQueueReservedPage_8814AUsb(
RTW_INFO("<===_InitQueueReservedPage_8814AUsb()\n");
}
static u32 _InitPowerOn_8814AU(_adapter *padapter)
{
int status = _SUCCESS;
@ -286,7 +276,6 @@ static u32 _InitPowerOn_8814AU(_adapter *padapter)
if(!HalPwrSeqCmdParsing(padapter, ~PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8814A_NIC_ENABLE_FLOW))
return _FAIL;
// Enable MAC DMA/WMAC/SCHEDULE/SEC block
// Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31.
rtw_write16(padapter, REG_CR_8814A, 0x00); //suggseted by zhouzhou, by page, 20111230
@ -299,10 +288,6 @@ static u32 _InitPowerOn_8814AU(_adapter *padapter)
return status;
}
//---------------------------------------------------------------
//
// MAC init functions
@ -340,7 +325,6 @@ _InitPageBoundary_8814AUsb(
}
static VOID
_InitNormalChipRegPriority_8814AUsb(
IN PADAPTER Adapter,
@ -370,7 +354,6 @@ _InitNormalChipTwoOutEpPriority_8814AUsb(
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 beQ,bkQ,viQ,voQ,mgtQ,hiQ;
u16 valueHi = 0;
u16 valueLow = 0;
@ -463,8 +446,6 @@ _InitQueuePriority_8814AUsb(
}
}
static VOID
_InitHardwareDropIncorrectBulkOut_8814A(
IN PADAPTER Adapter
@ -691,7 +672,6 @@ _InitEDCA_8814AUsb(
//rtw_write8(Adapter, REG_USTIME_EDCA, 0x50);
}
static VOID
_InitBeaconMaxError_8814A(
IN PADAPTER Adapter,
@ -705,7 +685,6 @@ _InitBeaconMaxError_8814A(
#endif
}
#ifdef CONFIG_LED
static void _InitHWLed(PADAPTER Adapter)
{
@ -787,7 +766,6 @@ usb_AggSettingTxUpdate_8814A(
#endif //CONFIG_USB_TX_AGGREGATION
} // usb_AggSettingTxUpdate
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingRxUpdate()
*
@ -893,8 +871,7 @@ USB_AggModeSwitch(
{
return; // Inf not support.
}
if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == _TRUE &&
pHalData->UsbRxHighSpeedMode == _FALSE)
{
@ -912,7 +889,6 @@ USB_AggModeSwitch(
return;
}
#if USB_RX_AGGREGATION_92C
if (pHalData->UsbRxHighSpeedMode == _TRUE)
{
@ -977,7 +953,6 @@ _InitOperationMode_8814A(
u8 regBwOpMode = 0;
u32 regRATR = 0, regRRSR = 0;
//1 This part need to modified according to the rate set we filtered!!
//
// Set RRSR, RATR, and REG_BWOPMODE registers
@ -1176,7 +1151,6 @@ void _ps_close_RF(_adapter *padapter){
//phy_SsPwrSwitch92CU(padapter, rf_off, 1);
}
/* A lightweight deinit function */
static void rtl8814au_hw_reset(_adapter *Adapter)
{
@ -1237,7 +1211,6 @@ u32 rtl8814au_hal_init(PADAPTER Adapter)
u32 init_start_time = rtw_get_current_time();
#ifdef DBG_HAL_INIT_PROFILING
enum HAL_INIT_STAGES {
@ -1365,8 +1338,6 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
*/
rtl8814au_hw_reset(Adapter); //todo
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
status = _InitPowerOn_8814AU(Adapter);
if(status == _FAIL){
@ -1479,7 +1450,6 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
#endif // CONFIG_TX_MCAST2UNI
#endif // CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI
#ifdef CONFIG_LED
_InitHWLed(Adapter);
#endif //CONFIG_LED
@ -1617,15 +1587,12 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK);
//ODM_TXPowerTrackingCheck(&pHalData->odmpriv );
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
//PHY_LCCalibrate_8812A(Adapter);
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21);
//HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS);
// _InitPABias(Adapter);
#if (MP_DRIVER == 1)
@ -1699,7 +1666,6 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
}
#endif
return status;
}
@ -1786,7 +1752,6 @@ u32 rtl8814au_hal_deinit(PADAPTER Adapter)
return _SUCCESS;
}
unsigned int rtl8814au_inirp_init(PADAPTER Adapter)
{
u8 i;
@ -1936,7 +1901,6 @@ hal_CustomizedBehavior_8814AU(
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct led_priv *pledpriv = &(Adapter->ledpriv);
// Led mode
switch(pHalData->CustomerID)
@ -2414,4 +2378,3 @@ void rtl8814au_set_hal_ops(_adapter * padapter)
rtl8814_set_hal_ops(pHalFunc);
}