rtl8812au-chinawrj/include/hal_data.h.edited

/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *                                        
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#ifndef __HAL_DATA_H__
#define __HAL_DATA_H__

#if 1//def  CONFIG_SINGLE_IMG

#include "../hal/phydm/phydm_precomp.h"
#ifdef CONFIG_BT_COEXIST
#include <hal_btcoex.h>
#endif

#ifdef CONFIG_SDIO_HCI
#include <hal_sdio.h>
#endif
#ifdef CONFIG_GSPI_HCI
#include <hal_gspi.h>
#endif
//
// <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06.
//
typedef enum _RT_MULTI_FUNC{
	RT_MULTI_FUNC_NONE	= 0x00,
	RT_MULTI_FUNC_WIFI 	= 0x01,
	RT_MULTI_FUNC_BT 		= 0x02,
	RT_MULTI_FUNC_GPS 	= 0x04,
}RT_MULTI_FUNC,*PRT_MULTI_FUNC;
//
// <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08.
//
typedef enum _RT_POLARITY_CTL {
	RT_POLARITY_LOW_ACT 	= 0,
	RT_POLARITY_HIGH_ACT 	= 1,	
} RT_POLARITY_CTL, *PRT_POLARITY_CTL;

// For RTL8723 regulator mode. by tynli. 2011.01.14.
typedef enum _RT_REGULATOR_MODE {
	RT_SWITCHING_REGULATOR 	= 0,
	RT_LDO_REGULATOR 			= 1,
} RT_REGULATOR_MODE, *PRT_REGULATOR_MODE;

//
// Interface type.
//
typedef	enum _INTERFACE_SELECT_PCIE{
	INTF_SEL0_SOLO_MINICARD			= 0,		// WiFi solo-mCard
	INTF_SEL1_BT_COMBO_MINICARD		= 1,		// WiFi+BT combo-mCard
	INTF_SEL2_PCIe						= 2,		// PCIe Card
} INTERFACE_SELECT_PCIE, *PINTERFACE_SELECT_PCIE;


typedef	enum _INTERFACE_SELECT_USB{
	INTF_SEL0_USB 				= 0,		// USB
	INTF_SEL1_USB_High_Power  	= 1,		// USB with high power PA
	INTF_SEL2_MINICARD		  	= 2,		// Minicard
	INTF_SEL3_USB_Solo 		= 3,		// USB solo-Slim module
	INTF_SEL4_USB_Combo		= 4,		// USB Combo-Slim module
	INTF_SEL5_USB_Combo_MF	= 5,		// USB WiFi+BT Multi-Function Combo, i.e., Proprietary layout(AS-VAU) which is the same as SDIO card
} INTERFACE_SELECT_USB, *PINTERFACE_SELECT_USB;

typedef enum _RT_AMPDU_BRUST_MODE{
	RT_AMPDU_BRUST_NONE 		= 0,
	RT_AMPDU_BRUST_92D 		= 1,
	RT_AMPDU_BRUST_88E 		= 2,
	RT_AMPDU_BRUST_8812_4 	= 3,
	RT_AMPDU_BRUST_8812_8 	= 4,
	RT_AMPDU_BRUST_8812_12 	= 5,
	RT_AMPDU_BRUST_8812_15	= 6,
	RT_AMPDU_BRUST_8723B	 	= 7,
}RT_AMPDU_BRUST,*PRT_AMPDU_BRUST_MODE;

/*
#define CHANNEL_MAX_NUMBER			14+24+21	// 14 is the max channel number
*/
#define CHANNEL_GROUP_MAX		(3 + 9)	/* ch1~3, ch4~9, ch10~14 total three groups */
#define MAX_PG_GROUP			13

// Tx Power Limit Table Size
#define MAX_REGULATION_NUM						4
#define MAX_RF_PATH_NUM_IN_POWER_LIMIT_TABLE	4
#define MAX_2_4G_BANDWIDTH_NUM					2
#define MAX_RATE_SECTION_NUM						10
#define MAX_5G_BANDWIDTH_NUM						4

#define MAX_BASE_NUM_IN_PHY_REG_PG_2_4G			10 //  CCK:1,OFDM:1, HT:4, VHT:4
#define MAX_BASE_NUM_IN_PHY_REG_PG_5G			9 // OFDM:1, HT:4, VHT:4


//###### duplicate code,will move to ODM #########
//#define IQK_MAC_REG_NUM		4
//#define IQK_ADDA_REG_NUM		16

//#define IQK_BB_REG_NUM			10
#define IQK_BB_REG_NUM_92C	9
#define IQK_BB_REG_NUM_92D	10
#define IQK_BB_REG_NUM_test	6

#define IQK_Matrix_Settings_NUM_92D	1+24+21

//#define HP_THERMAL_NUM		8
//###### duplicate code,will move to ODM #########

#ifdef CONFIG_USB_RX_AGGREGATION
typedef enum _USB_RX_AGG_MODE{
	USB_RX_AGG_DISABLE,
	USB_RX_AGG_DMA,
	USB_RX_AGG_USB,
	USB_RX_AGG_MIX
}USB_RX_AGG_MODE;

//#define MAX_RX_DMA_BUFFER_SIZE	10240		// 10K for 8192C RX DMA buffer

#endif

/* For store initial value of BB register */
typedef struct _BB_INIT_REGISTER {
	u16	offset;
	u32	value;

} BB_INIT_REGISTER, *PBB_INIT_REGISTER;

#define PAGE_SIZE_128	128
#define PAGE_SIZE_256	256
#define PAGE_SIZE_512	512

#define HCI_SUS_ENTER		0
#define HCI_SUS_LEAVING		1
#define HCI_SUS_LEAVE		2
#define HCI_SUS_ENTERING	3
#define HCI_SUS_ERR			4

#ifdef CONFIG_AUTO_CHNL_SEL_NHM
typedef enum _ACS_OP {
	ACS_INIT,		/*ACS - Variable init*/
	ACS_RESET,		/*ACS - NHM Counter reset*/
	ACS_SELECT,		/*ACS - NHM Counter Statistics */
} ACS_OP;

typedef enum _ACS_STATE {
	ACS_DISABLE,
	ACS_ENABLE,
} ACS_STATE;

struct auto_chan_sel {
	ATOMIC_T state;
	u8	ch; /* previous channel*/
};
#endif /*CONFIG_AUTO_CHNL_SEL_NHM*/

#define EFUSE_FILE_UNUSED 0
#define EFUSE_FILE_FAILED 1
#define EFUSE_FILE_LOADED 2

#define MACADDR_FILE_UNUSED 0
#define MACADDR_FILE_FAILED 1
#define MACADDR_FILE_LOADED 2

#define KFREE_FLAG_ON				BIT0
#define KFREE_FLAG_THERMAL_K_ON		BIT1

struct kfree_data_t {
		u8 flag;
		s8 bb_gain[BB_GAIN_NUM][RF_PATH_MAX];

#ifdef CONFIG_IEEE80211_BAND_5GHZ
		s8 pa_bias_5g[RF_PATH_MAX];
		s8 pad_bias_5g[RF_PATH_MAX];
#endif
		s8 thermal;
};

bool kfree_data_is_bb_gain_empty(struct kfree_data_t *data);

struct hal_spec_t {
	u8 macid_num;

	u8 sec_cam_ent_num;
	u8 sec_cap;

	u8 nss_num;
	u8 band_cap;	/* value of BAND_CAP_XXX */
	u8 bw_cap;		/* value of BW_CAP_XXX */

	u8 wl_func;		/* value of WL_FUNC_XXX */
};

typedef struct hal_com_data
{
	HAL_VERSION			VersionID;
	RT_MULTI_FUNC		MultiFunc; // For multi-function consideration.
	RT_POLARITY_CTL		PolarityCtl; // For Wifi PDn Polarity control.
	RT_REGULATOR_MODE	RegulatorMode; // switching regulator or LDO
	u8	hw_init_completed;
	/****** FW related ******/
	u16	FirmwareVersion;
	u16	FirmwareVersionRev;
	u16	FirmwareSubVersion;
	u16	FirmwareSignature;
	u8	RegFWOffload;	
	u8	fw_ractrl;
	u8	FwRsvdPageStartOffset; /* 2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.*/
	u8	LastHMEBoxNum;	/* H2C - for host message to fw */

	/****** current WIFI_PHY values ******/
	WIRELESS_MODE	CurrentWirelessMode;
	CHANNEL_WIDTH	CurrentChannelBW;
	BAND_TYPE		CurrentBandType;	/* 0:2.4G, 1:5G */
	BAND_TYPE		BandSet;
	u8				CurrentChannel;
	u8				CurrentCenterFrequencyIndex1;
	u8				nCur40MhzPrimeSC;	/* Control channel sub-carrier */
	u8				nCur80MhzPrimeSC;   /* used for primary 40MHz of 80MHz mode */
	BOOLEAN 		bSwChnlAndSetBWInProgress;	
	u8				bDisableSWChannelPlan; /* flag of disable software change channel plan	 */
	u16				BasicRateSet;	
	u32				ReceiveConfig;
	BOOLEAN			bSwChnl;
	BOOLEAN			bSetChnlBW;
	BOOLEAN			bChnlBWInitialized;
#ifdef CONFIG_AUTO_CHNL_SEL_NHM
	struct auto_chan_sel acs;
#endif
	/****** rf_ctrl *****/
	u8	rf_chip;
	u8	rf_type;
	u8	PackageType;
	u8	NumTotalRFPath;

	/****** Debug ******/
	u16	ForcedDataRate;	/* Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M. */
	u8	u1ForcedIgiLb;	/* forced IGI lower bound */	
	u8	bDumpRxPkt;
	u8	bDumpTxPkt;
	u8 	bDisableTXPowerTraining;

	
	/****** EEPROM setting.******/	
	u8	bautoload_fail_flag;
	u8	efuse_file_status;
	u8	macaddr_file_status;
	u8	EepromOrEfuse;
	u8	efuse_eeprom_data[EEPROM_MAX_SIZE]; /*92C:256bytes, 88E:512bytes, we use union set (512bytes)*/
	u8	InterfaceSel; /* board type kept in eFuse */
	u16	CustomerID;
	
	u16	EEPROMVID;
	u16	EEPROMSVID;
#ifdef CONFIG_USB_HCI
	u16	EEPROMPID;
	u16	EEPROMSDID;
#endif
#ifdef CONFIG_PCI_HCI
 	u16	EEPROMDID;
	u16	EEPROMSMID;	
#endif

	u8	EEPROMCustomerID;
	u8	EEPROMSubCustomerID;
	u8	EEPROMVersion;
	u8	EEPROMRegulatory;
	u8	EEPROMThermalMeter;
	u8	EEPROMBluetoothCoexist;	
	u8	EEPROMBluetoothType;
	u8	EEPROMBluetoothAntNum;
	u8	EEPROMBluetoothAntIsolation;
	u8	EEPROMBluetoothRadioShared;
	u8	bTXPowerDataReadFromEEPORM;
	u8	EEPROMMACAddr[ETH_ALEN];
	
#ifdef CONFIG_RF_GAIN_OFFSET
	u8	EEPROMRFGainOffset;
	u8	EEPROMRFGainVal;
	struct kfree_data_t kfree_data;
#endif /*CONFIG_RF_GAIN_OFFSET*/

#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B)
	u8	adjuseVoltageVal;
#endif
	u8	EfuseUsedPercentage;
	u16	EfuseUsedBytes;
	/*u8		EfuseMap[2][HWSET_MAX_SIZE_JAGUAR];*/
	EFUSE_HAL	EfuseHal;

	/*---------------------------------------------------------------------------------*/
	//3 [2.4G]
	u8	Index24G_CCK_Base[MAX_RF_PATH][CENTER_CH_2G_NUM];
	u8	Index24G_BW40_Base[MAX_RF_PATH][CENTER_CH_2G_NUM];
	//If only one tx, only BW20 and OFDM are used.
	s8	CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];	
	s8	OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
	s8	BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
	s8	BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
	//3 [5G]
	u8	Index5G_BW40_Base[MAX_RF_PATH][CENTER_CH_5G_ALL_NUM];
	u8	Index5G_BW80_Base[MAX_RF_PATH][CENTER_CH_5G_80M_NUM];
	s8	OFDM_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
	s8	BW20_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
	s8	BW40_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
	s8	BW80_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];

	u8	Regulation2_4G;
	u8	Regulation5G;

	u8	TxPwrInPercentage;

	/********************************
	*	TX power by rate table at most 4RF path.
	*	The register is 
	*
	*	VHT TX power by rate off setArray = 
	*	Band:-2G&5G = 0 / 1
	*	RF: at most 4*4 = ABCD=0/1/2/3
	*	CCK=0 OFDM=1/2 HT-MCS 0-15=3/4/56 VHT=7/8/9/10/11			
	**********************************/
	u8	TxPwrByRateTable;
	u8	TxPwrByRateBand;
	s8	TxPwrByRateOffset[TX_PWR_BY_RATE_NUM_BAND]
						 [TX_PWR_BY_RATE_NUM_RF]
						 [TX_PWR_BY_RATE_NUM_RF]
						 [TX_PWR_BY_RATE_NUM_RATE];
	//---------------------------------------------------------------------------------//

	/*
	//2 Power Limit Table 
	u8	TxPwrLevelCck[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
	u8	TxPwrLevelHT40_1S[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr
	u8	TxPwrLevelHT40_2S[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr
	s8	TxPwrHt20Diff[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
	u8	TxPwrLegacyHtDiff[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
	*/

	u8 tx_pwr_lmt_5g_20_40_ref;

	// Power Limit Table for 2.4G
	s8	TxPwrLimit_2_4G[MAX_REGULATION_NUM]
						[MAX_2_4G_BANDWIDTH_NUM]
						[MAX_RATE_SECTION_NUM]
						[CENTER_CH_2G_NUM]
						[MAX_RF_PATH];

	// Power Limit Table for 5G
	s8	TxPwrLimit_5G[MAX_REGULATION_NUM]
						[MAX_5G_BANDWIDTH_NUM]
						[MAX_RATE_SECTION_NUM]
						[CENTER_CH_5G_ALL_NUM]
						[MAX_RF_PATH];

	
	// Store the original power by rate value of the base of each rate section of rf path A & B
	u8	TxPwrByRateBase2_4G[TX_PWR_BY_RATE_NUM_RF]
						[TX_PWR_BY_RATE_NUM_RF]
						[MAX_BASE_NUM_IN_PHY_REG_PG_2_4G];
	u8	TxPwrByRateBase5G[TX_PWR_BY_RATE_NUM_RF]
						[TX_PWR_BY_RATE_NUM_RF]
						[MAX_BASE_NUM_IN_PHY_REG_PG_5G];

<<<<<<< .mine
	u8				TxPwrShadow[MAX_RF_PATH][DESC_RATEMAX];
=======
	u8	txpwr_by_rate_loaded:1;
	u8	txpwr_by_rate_from_file:1;
	u8	txpwr_limit_loaded:1;
	u8	txpwr_limit_from_file:1;

>>>>>>> .r15056
	// For power group
	/*
	u8	PwrGroupHT20[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
	u8	PwrGroupHT40[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
	*/
	u8	PGMaxGroup;
	
	// The current Tx Power Level
	u8	CurrentCckTxPwrIdx;
	u8	CurrentOfdm24GTxPwrIdx;
	u8	CurrentBW2024GTxPwrIdx;
	u8	CurrentBW4024GTxPwrIdx;
	
	// Read/write are allow for following hardware information variables	
	u8	pwrGroupCnt;
	u32	MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
	u32	CCKTxPowerLevelOriginalOffset;

	u8	CrystalCap;
	
	u8	PAType_2G;
	u8	PAType_5G;
	u8	LNAType_2G;
	u8	LNAType_5G;
	u8	ExternalPA_2G;
	u8	ExternalLNA_2G;
	u8	ExternalPA_5G;
	u8	ExternalLNA_5G;
	u16	TypeGLNA;
	u16	TypeGPA;
	u16	TypeALNA;
	u16	TypeAPA;
	u16	RFEType;

	u8	bLedOpenDrain; /* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */
	u32	AcParam_BE; /* Original parameter for BE, use for EDCA turbo.	*/

	BB_REGISTER_DEFINITION_T	PHYRegDef[MAX_RF_PATH];	//Radio A/B/C/D

	u32	RfRegChnlVal[MAX_RF_PATH];

	//RDG enable
	BOOLEAN	 bRDGEnable;

	u8	RegTxPause;
	// Beacon function related global variable.
	u8	RegBcnCtrlVal;
	u8	RegFwHwTxQCtrl;
	u8	RegReg542;
	u8	RegCR_1;
	u8	Reg837;
	u16	RegRRSR;
	
	/****** antenna diversity ******/
	u8	CurAntenna;
	u8	AntDivCfg;
	u8	AntDetection;
	u8	TRxAntDivType;
	u8	ant_path; //for 8723B s0/s1 selection	
	u32	AntennaTxPath;					/* Antenna path Tx */
	u32	AntennaRxPath;					/* Antenna path Rx */

	/******** PHY DM & DM Section **********/
	u8			DM_Type;
	_lock		IQKSpinLock;	
	u8			INIDATA_RATE[MACID_NUM_SW_LIMIT];
	/* Upper and Lower Signal threshold for Rate Adaptive*/	
	int			EntryMinUndecoratedSmoothedPWDB;
	int			EntryMaxUndecoratedSmoothedPWDB;
	int			MinUndecoratedPWDBForDM;
	DM_ODM_T	odmpriv;	
	u8			bIQKInitialized;
	u8 			bNeedIQK;
	/******** PHY DM & DM Section **********/



	// 2010/08/09 MH Add CU power down mode.
	BOOLEAN		pwrdown;

	// Add for dual MAC  0--Mac0 1--Mac1
	u32	interfaceIndex;

#ifdef CONFIG_P2P
	u8	p2p_ps_offload;
#endif
	/* Auto FSM to Turn On, include clock, isolation, power control for MAC only */
	u8	bMacPwrCtrlOn;
	u8 hci_sus_state;
	
	u8	RegIQKFWOffload;
	struct submit_ctx 	iqk_sctx;

	RT_AMPDU_BRUST		AMPDUBurstMode; //92C maybe not use, but for compile successfully

	u8	OutEpQueueSel;
	u8	OutEpNumber;	

#if defined (CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
	//
	// For SDIO Interface HAL related
	//

	//
	// SDIO ISR Related
	//
//	u32			IntrMask[1];
//	u32			IntrMaskToSet[1];
//	LOG_INTERRUPT		InterruptLog;
	u32			sdio_himr;
	u32			sdio_hisr;

	//
	// SDIO Tx FIFO related.
	//
	// HIQ, MID, LOW, PUB free pages; padapter->xmitpriv.free_txpg
	u8			SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE];
	_lock		SdioTxFIFOFreePageLock;
	u8			SdioTxOQTMaxFreeSpace;
	u8			SdioTxOQTFreeSpace;

	//
	// SDIO Rx FIFO related.
	//
	u8			SdioRxFIFOCnt;
	u16			SdioRxFIFOSize;

	u32			sdio_tx_max_len[SDIO_MAX_TX_QUEUE];// H, N, L, used for sdio tx aggregation max length per queue
#endif //CONFIG_SDIO_HCI

#ifdef CONFIG_USB_HCI

	// 2010/12/10 MH Add for USB aggreation mode dynamic shceme.
	BOOLEAN		UsbRxHighSpeedMode;
	BOOLEAN		UsbTxVeryHighSpeedMode;
	u32			UsbBulkOutSize;
	BOOLEAN		bSupportUSB3;

	// Interrupt relatd register information.
	u32			IntArray[3];//HISR0,HISR1,HSISR
	u32			IntrMask[3];
	u8			C2hArray[16];
	#ifdef CONFIG_USB_TX_AGGREGATION
	u8			UsbTxAggMode;
	u8			UsbTxAggDescNum;
	#endif // CONFIG_USB_TX_AGGREGATION
	
	#ifdef CONFIG_USB_RX_AGGREGATION
	u16			HwRxPageSize;				// Hardware setting
	u32			MaxUsbRxAggBlock;

	USB_RX_AGG_MODE	UsbRxAggMode;
	u8			UsbRxAggBlockCount;		/* FOR USB Mode, USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed */
	u8			UsbRxAggBlockTimeout;
	u8			UsbRxAggPageCount;			/* FOR DMA Mode, 8192C DMA page count*/
	u8			UsbRxAggPageTimeout;

	u8			RegAcUsbDmaSize;
	u8			RegAcUsbDmaTime;
	#endif//CONFIG_USB_RX_AGGREGATION
#endif //CONFIG_USB_HCI


#ifdef CONFIG_PCI_HCI
	//
	// EEPROM setting.
	//
	u32			TransmitConfig;
	u32			IntrMaskToSet[2];
	u32			IntArray[2];
	u32			IntrMask[2];
	u32			SysIntArray[1];
	u32			SysIntrMask[1];
	u32			IntrMaskReg[2];
	u32			IntrMaskDefault[2];

	BOOLEAN	 	bL1OffSupport;
	BOOLEAN 	bSupportBackDoor;

	u8			bDefaultAntenna;
	
	u8			bInterruptMigration;
	u8			bDisableTxInt;

	u16			RxTag;	
#endif //CONFIG_PCI_HCI
	

#ifdef DBG_CONFIG_ERROR_DETECT
	struct sreset_priv srestpriv;
#endif //#ifdef DBG_CONFIG_ERROR_DETECT

#ifdef CONFIG_BT_COEXIST
	// For bluetooth co-existance
	BT_COEXIST		bt_coexist;
#endif // CONFIG_BT_COEXIST

#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B) || defined(CONFIG_RTL8188F)
	#ifndef CONFIG_PCI_HCI	// mutual exclusive with PCI -- so they're SDIO and GSPI 
	// Interrupt relatd register information.
	u32			SysIntrStatus;
	u32			SysIntrMask;
	#endif
#endif /*endif CONFIG_RTL8723B	*/

#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
	char	para_file_buf[MAX_PARA_FILE_BUF_LEN];
	char *mac_reg;
	u32	mac_reg_len;
	char *bb_phy_reg;
	u32	bb_phy_reg_len;
	char *bb_agc_tab;
	u32	bb_agc_tab_len;
	char *bb_phy_reg_pg;
	u32	bb_phy_reg_pg_len;
	char *bb_phy_reg_mp;
	u32	bb_phy_reg_mp_len;
	char *rf_radio_a;
	u32	rf_radio_a_len;
	char *rf_radio_b;
	u32	rf_radio_b_len;
	char *rf_tx_pwr_track;
	u32	rf_tx_pwr_track_len;
	char *rf_tx_pwr_lmt;
	u32	rf_tx_pwr_lmt_len;
#endif

#ifdef CONFIG_BACKGROUND_NOISE_MONITOR
	s16 noise[ODM_MAX_CHANNEL_NUM];
#endif

	struct hal_spec_t hal_spec;

	u8	RfKFreeEnable;
	u8	RfKFree_ch_group;
	BOOLEAN				bCCKinCH14;
	BB_INIT_REGISTER	RegForRecover[5];

} HAL_DATA_COMMON, *PHAL_DATA_COMMON;



typedef struct hal_com_data HAL_DATA_TYPE, *PHAL_DATA_TYPE;
#define GET_HAL_DATA(__pAdapter)			((HAL_DATA_TYPE *)((__pAdapter)->HalData))
#define GET_HAL_SPEC(__pAdapter)			(&(GET_HAL_DATA((__pAdapter))->hal_spec))

#define GET_HAL_RFPATH_NUM(__pAdapter)		(((HAL_DATA_TYPE *)((__pAdapter)->HalData))->NumTotalRFPath )
#define RT_GetInterfaceSelection(_Adapter) 		(GET_HAL_DATA(_Adapter)->InterfaceSel)
#define GET_RF_TYPE(__pAdapter)				(GET_HAL_DATA(__pAdapter)->rf_type)
#define GET_KFREE_DATA(_adapter) (&(GET_HAL_DATA((_adapter))->kfree_data))

#define	SUPPORT_HW_RADIO_DETECT(Adapter)	(	RT_GetInterfaceSelection(Adapter) == INTF_SEL2_MINICARD ||\
												RT_GetInterfaceSelection(Adapter) == INTF_SEL3_USB_Solo ||\
												RT_GetInterfaceSelection(Adapter) == INTF_SEL4_USB_Combo)

#define get_hal_mac_addr(adapter) 				(GET_HAL_DATA(adapter)->EEPROMMACAddr)
#define is_boot_from_eeprom(adapter) 			(GET_HAL_DATA(adapter)->EepromOrEfuse)
#define rtw_get_hw_init_completed(adapter)		(GET_HAL_DATA(adapter)->hw_init_completed)
#define rtw_is_hw_init_completed(adapter)		(GET_HAL_DATA(adapter)->hw_init_completed == _TRUE)
#endif

#ifdef CONFIG_AUTO_CHNL_SEL_NHM
#define GET_ACS_STATE(padapter)					(ATOMIC_READ(&GET_HAL_DATA(padapter)->acs.state))
#define SET_ACS_STATE(padapter, set_state)			(ATOMIC_SET(&GET_HAL_DATA(padapter)->acs.state, set_state))
#define rtw_get_acs_channel(padapter)				(GET_HAL_DATA(padapter)->acs.ch)
#define rtw_set_acs_channel(padapter, survey_ch)	(GET_HAL_DATA(padapter)->acs.ch = survey_ch)
#endif /*CONFIG_AUTO_CHNL_SEL_NHM*/

#endif //__HAL_DATA_H__