gnab-rtl8812au/hal/OUTSRC/HalPhyRf.c
2013-11-19 21:24:49 +01:00

526 lines
22 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#include "odm_precomp.h"
#define CALCULATE_SWINGTALBE_OFFSET(_offset, _direction, _size, _deltaThermal) \
do {\
for(_offset = 0; _offset < _size; _offset++)\
{\
if(_deltaThermal < thermalThreshold[_direction][_offset])\
{\
if(_offset != 0)\
_offset--;\
break;\
}\
} \
if(_offset >= _size)\
_offset = _size-1;\
} while(0)
void ConfigureTxpowerTrack(
IN PDM_ODM_T pDM_Odm,
OUT PTXPWRTRACK_CFG pConfig
)
{
#if RTL8192E_SUPPORT
if(pDM_Odm->SupportICType==ODM_RTL8192E)
ConfigureTxpowerTrack_8192E(pConfig);
#endif
#if RTL8821A_SUPPORT
if(pDM_Odm->SupportICType==ODM_RTL8821)
ConfigureTxpowerTrack_8821A(pConfig);
#endif
#if RTL8812A_SUPPORT
if(pDM_Odm->SupportICType==ODM_RTL8812)
ConfigureTxpowerTrack_8812A(pConfig);
#endif
#if RTL8188E_SUPPORT
if(pDM_Odm->SupportICType==ODM_RTL8188E)
ConfigureTxpowerTrack_8188E(pConfig);
#endif
#if RTL8723B_SUPPORT
if(pDM_Odm->SupportICType==ODM_RTL8723B)
ConfigureTxpowerTrack_8723B(pConfig);
#endif
}
//======================================================================
// <20121113, Kordan> This function should be called when TxAGC changed.
// Otherwise the previous compensation is gone, because we record the
// delta of temperature between two TxPowerTracking watch dogs.
//
// NOTE: If Tx BB swing or Tx scaling is varified during run-time, still
// need to call this function.
//======================================================================
VOID
ODM_ClearTxPowerTrackingState(
IN PDM_ODM_T pDM_Odm
)
{
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(pDM_Odm->Adapter);
u1Byte p = 0;
pDM_Odm->BbSwingIdxCckBase = pDM_Odm->DefaultCckIndex;
pDM_Odm->BbSwingIdxCck = pDM_Odm->DefaultCckIndex;
pDM_Odm->RFCalibrateInfo.CCK_index = 0;
for (p = ODM_RF_PATH_A; p < MAX_RF_PATH; ++p)
{
pDM_Odm->BbSwingIdxOfdmBase[p] = pDM_Odm->DefaultOfdmIndex;
pDM_Odm->BbSwingIdxOfdm[p] = pDM_Odm->DefaultOfdmIndex;
pDM_Odm->RFCalibrateInfo.OFDM_index[p] = pDM_Odm->DefaultOfdmIndex;
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p] = 0;
pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[p] = 0;
pDM_Odm->RFCalibrateInfo.DeltaPowerIndexLast[p] = 0;
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p] = 0;
pDM_Odm->Aboslute_OFDMSwingIdx[p] = 0; // Initial Mix mode power tracking
pDM_Odm->Remnant_OFDMSwingIdx[p] = 0;
}
pDM_Odm->Modify_TxAGC_Flag_PathA= FALSE; //Initial at Modify Tx Scaling Mode
pDM_Odm->Modify_TxAGC_Flag_PathB= FALSE; //Initial at Modify Tx Scaling Mode
pDM_Odm->Remnant_CCKSwingIdx= 0;
pDM_Odm->RFCalibrateInfo.ThermalValue = pHalData->EEPROMThermalMeter;
pDM_Odm->RFCalibrateInfo.ThermalValue_IQK = pHalData->EEPROMThermalMeter;
pDM_Odm->RFCalibrateInfo.ThermalValue_LCK = pHalData->EEPROMThermalMeter;
}
VOID
ODM_TXPowerTrackingCallback_ThermalMeter(
#if (DM_ODM_SUPPORT_TYPE & ODM_AP)
IN PDM_ODM_T pDM_Odm
#else
IN PADAPTER Adapter
#endif
)
{
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
PDM_ODM_T pDM_Odm = &pHalData->DM_OutSrc;
#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)
PDM_ODM_T pDM_Odm = &pHalData->odmpriv;
#endif
#endif
u1Byte ThermalValue = 0, delta, delta_LCK, delta_IQK, p = 0, i = 0;
u1Byte ThermalValue_AVG_count = 0;
u4Byte ThermalValue_AVG = 0;
u1Byte OFDM_min_index = 0; // OFDM BB Swing should be less than +3.0dB, which is required by Arthur
u1Byte Indexforchannel = 0; // GetRightChnlPlaceforIQK(pHalData->CurrentChannel)
TXPWRTRACK_CFG c;
//4 1. The following TWO tables decide the final index of OFDM/CCK swing table.
pu1Byte deltaSwingTableIdx_TUP_A;
pu1Byte deltaSwingTableIdx_TDOWN_A;
pu1Byte deltaSwingTableIdx_TUP_B;
pu1Byte deltaSwingTableIdx_TDOWN_B;
//4 2. Initilization ( 7 steps in total )
ConfigureTxpowerTrack(pDM_Odm, &c);
(*c.GetDeltaSwingTable)(pDM_Odm, (pu1Byte*)&deltaSwingTableIdx_TUP_A, (pu1Byte*)&deltaSwingTableIdx_TDOWN_A,
(pu1Byte*)&deltaSwingTableIdx_TUP_B, (pu1Byte*)&deltaSwingTableIdx_TDOWN_B);
pDM_Odm->RFCalibrateInfo.TXPowerTrackingCallbackCnt++; //cosa add for debug
pDM_Odm->RFCalibrateInfo.bTXPowerTrackingInit = TRUE;
#if (MP_DRIVER == 1)
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = pHalData->TxPowerTrackControl; // <Kordan> We should keep updating the control variable according to HalData.
#endif
#if (DM_ODM_SUPPORT_TYPE == ODM_CE)
if ( *(pDM_Odm->mp_mode) == 1)
#endif
// <Kordan> RFCalibrateInfo.RegA24 will be initialized when ODM HW configuring, but MP configures with para files.
pDM_Odm->RFCalibrateInfo.RegA24 = 0x090e1317;
#endif
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("===>ODM_TXPowerTrackingCallback_ThermalMeter, \
\n pDM_Odm->BbSwingIdxCckBase: %d, pDM_Odm->BbSwingIdxOfdmBase[A]: %d, pDM_Odm->DefaultOfdmIndex: %d\n",
pDM_Odm->BbSwingIdxCckBase, pDM_Odm->BbSwingIdxOfdmBase[ODM_RF_PATH_A], pDM_Odm->DefaultOfdmIndex));
ThermalValue = (u1Byte)ODM_GetRFReg(pDM_Odm, ODM_RF_PATH_A, c.ThermalRegAddr, 0xfc00); //0x42: RF Reg[15:10] 88E
if( ! pDM_Odm->RFCalibrateInfo.TxPowerTrackControl || pHalData->EEPROMThermalMeter == 0 ||
pHalData->EEPROMThermalMeter == 0xFF)
return;
//4 3. Initialize ThermalValues of RFCalibrateInfo
if(pDM_Odm->RFCalibrateInfo.bReloadtxpowerindex)
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("reload ofdm index for band switch\n"));
}
//4 4. Calculate average thermal meter
pDM_Odm->RFCalibrateInfo.ThermalValue_AVG[pDM_Odm->RFCalibrateInfo.ThermalValue_AVG_index] = ThermalValue;
pDM_Odm->RFCalibrateInfo.ThermalValue_AVG_index++;
if(pDM_Odm->RFCalibrateInfo.ThermalValue_AVG_index == c.AverageThermalNum) //Average times = c.AverageThermalNum
pDM_Odm->RFCalibrateInfo.ThermalValue_AVG_index = 0;
for(i = 0; i < c.AverageThermalNum; i++)
{
if(pDM_Odm->RFCalibrateInfo.ThermalValue_AVG[i])
{
ThermalValue_AVG += pDM_Odm->RFCalibrateInfo.ThermalValue_AVG[i];
ThermalValue_AVG_count++;
}
}
if(ThermalValue_AVG_count) //Calculate Average ThermalValue after average enough times
{
ThermalValue = (u1Byte)(ThermalValue_AVG / ThermalValue_AVG_count);
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("AVG Thermal Meter = 0x%X, EFUSE Thermal Base = 0x%X\n", ThermalValue, pHalData->EEPROMThermalMeter));
}
//4 5. Calculate delta, delta_LCK, delta_IQK.
//"delta" here is used to determine whether thermal value changes or not.
delta = (ThermalValue > pDM_Odm->RFCalibrateInfo.ThermalValue)?(ThermalValue - pDM_Odm->RFCalibrateInfo.ThermalValue):(pDM_Odm->RFCalibrateInfo.ThermalValue - ThermalValue);
delta_LCK = (ThermalValue > pDM_Odm->RFCalibrateInfo.ThermalValue_LCK)?(ThermalValue - pDM_Odm->RFCalibrateInfo.ThermalValue_LCK):(pDM_Odm->RFCalibrateInfo.ThermalValue_LCK - ThermalValue);
delta_IQK = (ThermalValue > pDM_Odm->RFCalibrateInfo.ThermalValue_IQK)?(ThermalValue - pDM_Odm->RFCalibrateInfo.ThermalValue_IQK):(pDM_Odm->RFCalibrateInfo.ThermalValue_IQK - ThermalValue);
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("(delta, delta_LCK, delta_IQK) = (%d, %d, %d)\n", delta, delta_LCK, delta_IQK));
//4 6. If necessary, do LCK.
if ((delta_LCK >= c.Threshold_IQK)) // Delta temperature is equal to or larger than 20 centigrade.
{
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("delta_LCK(%d) >= Threshold_IQK(%d)\n", delta_LCK, c.Threshold_IQK));
pDM_Odm->RFCalibrateInfo.ThermalValue_LCK = ThermalValue;
if(c.PHY_LCCalibrate)
(*c.PHY_LCCalibrate)(pDM_Odm);
}
//3 7. If necessary, move the index of swing table to adjust Tx power.
if (delta > 0 && pDM_Odm->RFCalibrateInfo.TxPowerTrackControl)
{
//"delta" here is used to record the absolute value of differrence.
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
delta = ThermalValue > pHalData->EEPROMThermalMeter?(ThermalValue - pHalData->EEPROMThermalMeter):(pHalData->EEPROMThermalMeter - ThermalValue);
#else
delta = (ThermalValue > pDM_Odm->priv->pmib->dot11RFEntry.ther)?(ThermalValue - pDM_Odm->priv->pmib->dot11RFEntry.ther):(pDM_Odm->priv->pmib->dot11RFEntry.ther - ThermalValue);
#endif
if (delta >= TXSCALE_TABLE_SIZE)
delta = TXSCALE_TABLE_SIZE - 1;
//4 7.1 The Final Power Index = BaseIndex + PowerIndexOffset
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
if(ThermalValue > pHalData->EEPROMThermalMeter) {
#else
if(ThermalValue > pDM_Odm->priv->pmib->dot11RFEntry.ther) {
#endif
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("deltaSwingTableIdx_TUP_A[%d] = %d\n", delta, deltaSwingTableIdx_TUP_A[delta]));
pDM_Odm->RFCalibrateInfo.DeltaPowerIndexLast[ODM_RF_PATH_A] = pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[ODM_RF_PATH_A];
pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[ODM_RF_PATH_A] = deltaSwingTableIdx_TUP_A[delta];
pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_A] = deltaSwingTableIdx_TUP_A[delta]; // Record delta swing for mix mode power tracking
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("******Temp is higher and pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_A] = %d\n", pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_A]));
if(c.RfPathCount > 1)
{
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("deltaSwingTableIdx_TUP_B[%d] = %d\n", delta, deltaSwingTableIdx_TUP_B[delta]));
pDM_Odm->RFCalibrateInfo.DeltaPowerIndexLast[ODM_RF_PATH_B] = pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[ODM_RF_PATH_B];
pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[ODM_RF_PATH_B] = deltaSwingTableIdx_TUP_B[delta];
pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_B] = deltaSwingTableIdx_TUP_B[delta]; // Record delta swing for mix mode power tracking
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("******Temp is higher and pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_B] = %d\n", pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_B]));
}
}
else {
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("deltaSwingTableIdx_TDOWN_A[%d] = %d\n", delta, deltaSwingTableIdx_TDOWN_A[delta]));
pDM_Odm->RFCalibrateInfo.DeltaPowerIndexLast[ODM_RF_PATH_A] = pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[ODM_RF_PATH_A];
pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[ODM_RF_PATH_A] = -1 * deltaSwingTableIdx_TDOWN_A[delta];
pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_A] = -1 * deltaSwingTableIdx_TDOWN_A[delta]; // Record delta swing for mix mode power tracking
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("******Temp is lower and pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_A] = %d\n", pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_A]));
if(c.RfPathCount > 1)
{
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("deltaSwingTableIdx_TDOWN_B[%d] = %d\n", delta, deltaSwingTableIdx_TDOWN_B[delta]));
pDM_Odm->RFCalibrateInfo.DeltaPowerIndexLast[ODM_RF_PATH_B] = pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[ODM_RF_PATH_B];
pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[ODM_RF_PATH_B] = -1 * deltaSwingTableIdx_TDOWN_B[delta];
pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_B] = -1 * deltaSwingTableIdx_TDOWN_B[delta]; // Record delta swing for mix mode power tracking
ODM_RT_TRACE(pDM_Odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("******Temp is lower and pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_B] = %d\n", pDM_Odm->Aboslute_OFDMSwingIdx[ODM_RF_PATH_B]));
}
}
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("\n\n================================ [Path-%c] Calculating PowerIndexOffset ================================\n", (p == ODM_RF_PATH_A ? 'A' : 'B')));
if (pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[p] == pDM_Odm->RFCalibrateInfo.DeltaPowerIndexLast[p]) // If Thermal value changes but lookup table value still the same
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p] = 0;
else
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p] = pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[p] - pDM_Odm->RFCalibrateInfo.DeltaPowerIndexLast[p]; // Power Index Diff between 2 times Power Tracking
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("[Path-%c] PowerIndexOffset(%d) = DeltaPowerIndex(%d) - DeltaPowerIndexLast(%d)\n",
(p == ODM_RF_PATH_A ? 'A' : 'B'), pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p], pDM_Odm->RFCalibrateInfo.DeltaPowerIndex[p],
pDM_Odm->RFCalibrateInfo.DeltaPowerIndexLast[p]));
pDM_Odm->RFCalibrateInfo.OFDM_index[p] = pDM_Odm->BbSwingIdxOfdmBase[p] + pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p];
pDM_Odm->RFCalibrateInfo.CCK_index = pDM_Odm->BbSwingIdxCckBase + pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p];
pDM_Odm->BbSwingIdxCck = pDM_Odm->RFCalibrateInfo.CCK_index;
pDM_Odm->BbSwingIdxOfdm[p] = pDM_Odm->RFCalibrateInfo.OFDM_index[p];
// *************Print BB Swing Base and Index Offset*************
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("The 'CCK' final index(%d) = BaseIndex(%d) + PowerIndexOffset(%d)\n",
pDM_Odm->BbSwingIdxCck, pDM_Odm->BbSwingIdxCckBase, pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p]));
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("The 'OFDM' final index(%d) = BaseIndex[%c](%d) + PowerIndexOffset(%d)\n",
pDM_Odm->BbSwingIdxOfdm[p], (p == ODM_RF_PATH_A ? 'A' : 'B'), pDM_Odm->BbSwingIdxOfdmBase[p], pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p]));
//4 7.1 Handle boundary conditions of index.
if(pDM_Odm->RFCalibrateInfo.OFDM_index[p] > c.SwingTableSize_OFDM-1)
{
pDM_Odm->RFCalibrateInfo.OFDM_index[p] = c.SwingTableSize_OFDM-1;
}
else if (pDM_Odm->RFCalibrateInfo.OFDM_index[p] < OFDM_min_index)
{
pDM_Odm->RFCalibrateInfo.OFDM_index[p] = OFDM_min_index;
}
}
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("\n\n========================================================================================================\n"));
if(pDM_Odm->RFCalibrateInfo.CCK_index > c.SwingTableSize_CCK-1)
pDM_Odm->RFCalibrateInfo.CCK_index = c.SwingTableSize_CCK-1;
//else if (pDM_Odm->RFCalibrateInfo.CCK_index < 0)
//pDM_Odm->RFCalibrateInfo.CCK_index = 0;
}
else
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("The thermal meter is unchanged or TxPowerTracking OFF(%d): ThermalValue: %d , pDM_Odm->RFCalibrateInfo.ThermalValue: %d\n",
pDM_Odm->RFCalibrateInfo.TxPowerTrackControl, ThermalValue, pDM_Odm->RFCalibrateInfo.ThermalValue));
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[p] = 0;
}
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("TxPowerTracking: [CCK] Swing Current Index: %d, Swing Base Index: %d\n",
pDM_Odm->RFCalibrateInfo.CCK_index, pDM_Odm->BbSwingIdxCckBase)); //Print Swing base & current
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("TxPowerTracking: [OFDM] Swing Current Index: %d, Swing Base Index[%c]: %d\n",
pDM_Odm->RFCalibrateInfo.OFDM_index[p], (p == ODM_RF_PATH_A ? 'A' : 'B'), pDM_Odm->BbSwingIdxOfdmBase[p]));
}
if ((pDM_Odm->RFCalibrateInfo.PowerIndexOffset[ODM_RF_PATH_A] != 0 ||
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[ODM_RF_PATH_B] != 0 ) &&
pDM_Odm->RFCalibrateInfo.TxPowerTrackControl)
{
//4 7.2 Configure the Swing Table to adjust Tx Power.
pDM_Odm->RFCalibrateInfo.bTxPowerChanged = TRUE; // Always TRUE after Tx Power is adjusted by power tracking.
//
// 2012/04/23 MH According to Luke's suggestion, we can not write BB digital
// to increase TX power. Otherwise, EVM will be bad.
//
// 2012/04/25 MH Add for tx power tracking to set tx power in tx agc for 88E.
if (ThermalValue > pDM_Odm->RFCalibrateInfo.ThermalValue)
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("Temperature Increasing(A): delta_pi: %d , delta_t: %d, Now_t: %d, EFUSE_t: %d, Last_t: %d\n",
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[ODM_RF_PATH_A], delta, ThermalValue, pHalData->EEPROMThermalMeter, pDM_Odm->RFCalibrateInfo.ThermalValue));
if(c.RfPathCount > 1)
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("Temperature Increasing(B): delta_pi: %d , delta_t: %d, Now_t: %d, EFUSE_t: %d, Last_t: %d\n",
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[ODM_RF_PATH_B], delta, ThermalValue, pHalData->EEPROMThermalMeter, pDM_Odm->RFCalibrateInfo.ThermalValue));
}
else if (ThermalValue < pDM_Odm->RFCalibrateInfo.ThermalValue)// Low temperature
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("Temperature Decreasing(A): delta_pi: %d , delta_t: %d, Now_t: %d, EFUSE_t: %d, Last_t: %d\n",
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[ODM_RF_PATH_A], delta, ThermalValue, pHalData->EEPROMThermalMeter, pDM_Odm->RFCalibrateInfo.ThermalValue));
if(c.RfPathCount > 1)
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("Temperature Decreasing(B): delta_pi: %d , delta_t: %d, Now_t: %d, EFUSE_t: %d, Last_t: %d\n",
pDM_Odm->RFCalibrateInfo.PowerIndexOffset[ODM_RF_PATH_B], delta, ThermalValue, pHalData->EEPROMThermalMeter, pDM_Odm->RFCalibrateInfo.ThermalValue));
}
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
if (ThermalValue > pHalData->EEPROMThermalMeter)
#else
if (ThermalValue > pDM_Odm->priv->pmib->dot11RFEntry.ther)
#endif
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("Temperature(%d) higher than PG value(%d)\n", ThermalValue, pHalData->EEPROMThermalMeter));
if (pDM_Odm->SupportICType == ODM_RTL8188E || pDM_Odm->SupportICType == ODM_RTL8192E)
{
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
(*c.ODM_TxPwrTrackSetPwr)(pDM_Odm, TXAGC, p, 0);
}
else if(pDM_Odm->SupportICType == ODM_RTL8821)
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("**********Enter POWER Tracking MIX_MODE**********\n"));
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
(*c.ODM_TxPwrTrackSetPwr)(pDM_Odm, MIX_MODE, p, Indexforchannel);
}
else
{
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
(*c.ODM_TxPwrTrackSetPwr)(pDM_Odm, BBSWING, p, Indexforchannel);
}
}
else
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("Temperature(%d) lower than PG value(%d)\n", ThermalValue, pHalData->EEPROMThermalMeter));
if(pDM_Odm->SupportICType == ODM_RTL8821)
{
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("**********Enter POWER Tracking MIX_MODE**********\n"));
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
(*c.ODM_TxPwrTrackSetPwr)(pDM_Odm, MIX_MODE, p, Indexforchannel);
}
else
{
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
(*c.ODM_TxPwrTrackSetPwr)(pDM_Odm, BBSWING, p, Indexforchannel);
}
}
pDM_Odm->BbSwingIdxCckBase = pDM_Odm->BbSwingIdxCck; // Record last time Power Tracking result as base.
for (p = ODM_RF_PATH_A; p < c.RfPathCount; p++)
pDM_Odm->BbSwingIdxOfdmBase[p] = pDM_Odm->BbSwingIdxOfdm[p];
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
("pDM_Odm->RFCalibrateInfo.ThermalValue = %d ThermalValue= %d\n", pDM_Odm->RFCalibrateInfo.ThermalValue, ThermalValue));
pDM_Odm->RFCalibrateInfo.ThermalValue = ThermalValue; //Record last Power Tracking Thermal Value
}
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
if ((delta_IQK >= c.Threshold_IQK)) // Delta temperature is equal to or larger than 20 centigrade (When threshold is 8).
(*c.DoIQK)(pDM_Odm, delta_IQK, ThermalValue, 8);
#endif
ODM_RT_TRACE(pDM_Odm,ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,("<===ODM_TXPowerTrackingCallback_ThermalMeter\n"));
pDM_Odm->RFCalibrateInfo.TXPowercount = 0;
}
//3============================================================
//3 IQ Calibration
//3============================================================
VOID
ODM_ResetIQKResult(
IN PDM_ODM_T pDM_Odm
)
{
u1Byte i;
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN || DM_ODM_SUPPORT_TYPE == ODM_CE)
PADAPTER Adapter = pDM_Odm->Adapter;
if (!IS_HARDWARE_TYPE_8192D(Adapter))
return;
#endif
ODM_RT_TRACE(pDM_Odm,ODM_COMP_CALIBRATION, ODM_DBG_LOUD,("PHY_ResetIQKResult:: settings regs %d default regs %d\n", (u32)(sizeof(pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting)/sizeof(IQK_MATRIX_REGS_SETTING)), IQK_Matrix_Settings_NUM));
//0xe94, 0xe9c, 0xea4, 0xeac, 0xeb4, 0xebc, 0xec4, 0xecc
for(i = 0; i < IQK_Matrix_Settings_NUM; i++)
{
{
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].Value[0][0] =
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].Value[0][2] =
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].Value[0][4] =
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].Value[0][6] = 0x100;
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].Value[0][1] =
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].Value[0][3] =
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].Value[0][5] =
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].Value[0][7] = 0x0;
pDM_Odm->RFCalibrateInfo.IQKMatrixRegSetting[i].bIQKDone = FALSE;
}
}
}
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
u1Byte ODM_GetRightChnlPlaceforIQK(u1Byte chnl)
{
u1Byte channel_all[ODM_TARGET_CHNL_NUM_2G_5G] =
{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,100,102,104,106,108,110,112,114,116,118,120,122,124,126,128,130,132,134,136,138,140,149,151,153,155,157,159,161,163,165};
u1Byte place = chnl;
if(chnl > 14)
{
for(place = 14; place<sizeof(channel_all); place++)
{
if(channel_all[place] == chnl)
{
return place-13;
}
}
}
return 0;
}
#endif