gnab-rtl8812au/include/rtw_mp.h
2013-11-19 21:24:49 +01:00

720 lines
18 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef _RTW_MP_H_
#define _RTW_MP_H_
#if 0
#define MPT_NOOP 0
#define MPT_READ_MAC_1BYTE 1
#define MPT_READ_MAC_2BYTE 2
#define MPT_READ_MAC_4BYTE 3
#define MPT_WRITE_MAC_1BYTE 4
#define MPT_WRITE_MAC_2BYTE 5
#define MPT_WRITE_MAC_4BYTE 6
#define MPT_READ_BB_CCK 7
#define MPT_WRITE_BB_CCK 8
#define MPT_READ_BB_OFDM 9
#define MPT_WRITE_BB_OFDM 10
#define MPT_READ_RF 11
#define MPT_WRITE_RF 12
#define MPT_READ_EEPROM_1BYTE 13
#define MPT_WRITE_EEPROM_1BYTE 14
#define MPT_READ_EEPROM_2BYTE 15
#define MPT_WRITE_EEPROM_2BYTE 16
#define MPT_SET_CSTHRESHOLD 21
#define MPT_SET_INITGAIN 22
#define MPT_SWITCH_BAND 23
#define MPT_SWITCH_CHANNEL 24
#define MPT_SET_DATARATE 25
#define MPT_SWITCH_ANTENNA 26
#define MPT_SET_TX_POWER 27
#define MPT_SET_CONT_TX 28
#define MPT_SET_SINGLE_CARRIER 29
#define MPT_SET_CARRIER_SUPPRESSION 30
#define MPT_GET_RATE_TABLE 31
#define MPT_READ_TSSI 32
#define MPT_GET_THERMAL_METER 33
#endif
#define MAX_MP_XMITBUF_SZ 2048
#define NR_MP_XMITFRAME 8
struct mp_xmit_frame
{
_list list;
struct pkt_attrib attrib;
_pkt *pkt;
int frame_tag;
_adapter *padapter;
#ifdef CONFIG_USB_HCI
//insert urb, irp, and irpcnt info below...
//max frag_cnt = 8
u8 *mem_addr;
u32 sz[8];
#if defined(PLATFORM_OS_XP) || defined(PLATFORM_LINUX)
PURB pxmit_urb[8];
#endif
#ifdef PLATFORM_OS_XP
PIRP pxmit_irp[8];
#endif
u8 bpending[8];
sint ac_tag[8];
sint last[8];
uint irpcnt;
uint fragcnt;
#endif /* CONFIG_USB_HCI */
uint mem[(MAX_MP_XMITBUF_SZ >> 2)];
};
struct mp_wiparam
{
u32 bcompleted;
u32 act_type;
u32 io_offset;
u32 io_value;
};
typedef void(*wi_act_func)(void* padapter);
#ifdef PLATFORM_WINDOWS
struct mp_wi_cntx
{
u8 bmpdrv_unload;
// Work Item
NDIS_WORK_ITEM mp_wi;
NDIS_EVENT mp_wi_evt;
_lock mp_wi_lock;
u8 bmp_wi_progress;
wi_act_func curractfunc;
// Variable needed in each implementation of CurrActFunc.
struct mp_wiparam param;
};
#endif
struct mp_tx
{
u8 stop;
u32 count, sended;
u8 payload;
struct pkt_attrib attrib;
struct tx_desc desc;
u8 resvdtx[7];
u8 *pallocated_buf;
u8 *buf;
u32 buf_size, write_size;
_thread_hdl_ PktTxThread;
};
#if defined(CONFIG_RTL8192C) || defined(CONFIG_RTL8192D) || defined(CONFIG_RTL8723A) || defined(CONFIG_RTL8188E) || defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) ||defined(CONFIG_RTL8192E) || defined(CONFIG_RTL8723B)
#define MP_MAX_LINES 1000
#define MP_MAX_LINES_BYTES 256
#define u1Byte u8
#define s1Byte s8
#define u4Byte u32
#define s4Byte s32
#define u1Byte u8
#define pu1Byte u8*
#define u2Byte u16
#define pu2Byte u16*
#define u4Byte u32
#define pu4Byte u32*
#define u8Byte u64
#define pu8Byte u64*
#define s1Byte s8
#define ps1Byte s8*
#define s2Byte s16
#define ps2Byte s16*
#define s4Byte s32
#define ps4Byte s32*
#define s8Byte s64
#define ps8Byte s64*
#define UCHAR u8
#define USHORT u16
#define UINT u32
#define ULONG u32
#define PULONG u32*
typedef VOID (*MPT_WORK_ITEM_HANDLER)(IN PVOID Adapter);
typedef struct _MPT_CONTEXT
{
// Indicate if we have started Mass Production Test.
BOOLEAN bMassProdTest;
// Indicate if the driver is unloading or unloaded.
BOOLEAN bMptDrvUnload;
_sema MPh2c_Sema;
_timer MPh2c_timeout_timer;
// Event used to sync H2c for BT control
BOOLEAN MptH2cRspEvent;
BOOLEAN MptBtC2hEvent;
BOOLEAN bMPh2c_timeout;
/* 8190 PCI does not support NDIS_WORK_ITEM. */
// Work Item for Mass Production Test.
//NDIS_WORK_ITEM MptWorkItem;
// RT_WORK_ITEM MptWorkItem;
// Event used to sync the case unloading driver and MptWorkItem is still in progress.
// NDIS_EVENT MptWorkItemEvent;
// To protect the following variables.
// NDIS_SPIN_LOCK MptWorkItemSpinLock;
// Indicate a MptWorkItem is scheduled and not yet finished.
BOOLEAN bMptWorkItemInProgress;
// An instance which implements function and context of MptWorkItem.
MPT_WORK_ITEM_HANDLER CurrMptAct;
// 1=Start, 0=Stop from UI.
ULONG MptTestStart;
// _TEST_MODE, defined in MPT_Req2.h
ULONG MptTestItem;
// Variable needed in each implementation of CurrMptAct.
ULONG MptActType; // Type of action performed in CurrMptAct.
// The Offset of IO operation is depend of MptActType.
ULONG MptIoOffset;
// The Value of IO operation is depend of MptActType.
ULONG MptIoValue;
// The RfPath of IO operation is depend of MptActType.
ULONG MptRfPath;
WIRELESS_MODE MptWirelessModeToSw; // Wireless mode to switch.
u8 MptChannelToSw; // Channel to switch.
u8 MptInitGainToSet; // Initial gain to set.
//ULONG bMptAntennaA; // TRUE if we want to use antenna A.
ULONG MptBandWidth; // bandwidth to switch.
ULONG MptRateIndex; // rate index.
// Register value kept for Single Carrier Tx test.
u8 btMpCckTxPower;
// Register value kept for Single Carrier Tx test.
u8 btMpOfdmTxPower;
// For MP Tx Power index
u8 TxPwrLevel[2]; // rf-A, rf-B
u32 RegTxPwrLimit;
// Content of RCR Regsiter for Mass Production Test.
ULONG MptRCR;
// TRUE if we only receive packets with specific pattern.
BOOLEAN bMptFilterPattern;
// Rx OK count, statistics used in Mass Production Test.
ULONG MptRxOkCnt;
// Rx CRC32 error count, statistics used in Mass Production Test.
ULONG MptRxCrcErrCnt;
BOOLEAN bCckContTx; // TRUE if we are in CCK Continuous Tx test.
BOOLEAN bOfdmContTx; // TRUE if we are in OFDM Continuous Tx test.
BOOLEAN bStartContTx; // TRUE if we have start Continuous Tx test.
// TRUE if we are in Single Carrier Tx test.
BOOLEAN bSingleCarrier;
// TRUE if we are in Carrier Suppression Tx Test.
BOOLEAN bCarrierSuppression;
//TRUE if we are in Single Tone Tx test.
BOOLEAN bSingleTone;
// ACK counter asked by K.Y..
BOOLEAN bMptEnableAckCounter;
ULONG MptAckCounter;
// SD3 Willis For 8192S to save 1T/2T RF table for ACUT Only fro ACUT delete later ~~~!
//s1Byte BufOfLines[2][MAX_LINES_HWCONFIG_TXT][MAX_BYTES_LINE_HWCONFIG_TXT];
//s1Byte BufOfLines[2][MP_MAX_LINES][MP_MAX_LINES_BYTES];
//s4Byte RfReadLine[2];
u8 APK_bound[2]; //for APK path A/path B
BOOLEAN bMptIndexEven;
u8 backup0xc50;
u8 backup0xc58;
u8 backup0xc30;
u8 backup0x52_RF_A;
u8 backup0x52_RF_B;
u1Byte h2cReqNum;
u1Byte c2hBuf[20];
u1Byte btInBuf[100];
ULONG mptOutLen;
u1Byte mptOutBuf[100];
}MPT_CONTEXT, *PMPT_CONTEXT;
#endif
//#endif
/* E-Fuse */
#ifdef CONFIG_RTL8192D
#define EFUSE_MAP_SIZE 256
#endif
#ifdef CONFIG_RTL8192C
#define EFUSE_MAP_SIZE 128
#endif
#ifdef CONFIG_RTL8723A
#define EFUSE_MAP_SIZE 256
#endif
#ifdef CONFIG_RTL8188E
#define EFUSE_MAP_SIZE 512
#endif
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A)
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8192E
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8723B
#define EFUSE_MAP_SIZE 512
#endif
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A)
#define EFUSE_MAX_SIZE 1024
#elif defined(CONFIG_RTL8188E)
#define EFUSE_MAX_SIZE 256
#else
#define EFUSE_MAX_SIZE 512
#endif
/* end of E-Fuse */
//#define RTPRIV_IOCTL_MP ( SIOCIWFIRSTPRIV + 0x17)
enum {
WRITE_REG = 1,
READ_REG,
WRITE_RF,
READ_RF,
MP_START,
MP_STOP,
MP_RATE,
MP_CHANNEL,
MP_BANDWIDTH,
MP_TXPOWER,
MP_ANT_TX,
MP_ANT_RX,
MP_CTX,
MP_QUERY,
MP_ARX,
MP_PSD,
MP_PWRTRK,
MP_THER,
MP_IOCTL,
EFUSE_GET,
EFUSE_SET,
MP_RESET_STATS,
MP_DUMP,
MP_PHYPARA,
MP_SetRFPathSwh,
MP_QueryDrvStats,
MP_SetBT,
CTA_TEST,
MP_NULL,
MP_GET_TXPOWER_INX,
};
struct mp_priv
{
_adapter *papdater;
//Testing Flag
u32 mode;//0 for normal type packet, 1 for loopback packet (16bytes TXCMD)
u32 prev_fw_state;
//OID cmd handler
struct mp_wiparam workparam;
// u8 act_in_progress;
//Tx Section
u8 TID;
u32 tx_pktcount;
struct mp_tx tx;
//Rx Section
u32 rx_pktcount;
u32 rx_crcerrpktcount;
u32 rx_pktloss;
struct recv_stat rxstat;
//RF/BB relative
u8 channel;
u8 bandwidth;
u8 prime_channel_offset;
u8 txpoweridx;
u8 txpoweridx_b;
u8 rateidx;
u32 preamble;
// u8 modem;
u32 CrystalCap;
// u32 curr_crystalcap;
u16 antenna_tx;
u16 antenna_rx;
// u8 curr_rfpath;
u8 check_mp_pkt;
u8 bSetTxPower;
// uint ForcedDataRate;
struct wlan_network mp_network;
NDIS_802_11_MAC_ADDRESS network_macaddr;
#ifdef PLATFORM_WINDOWS
u32 rx_testcnt;
u32 rx_testcnt1;
u32 rx_testcnt2;
u32 tx_testcnt;
u32 tx_testcnt1;
struct mp_wi_cntx wi_cntx;
u8 h2c_result;
u8 h2c_seqnum;
u16 h2c_cmdcode;
u8 h2c_resp_parambuf[512];
_lock h2c_lock;
_lock wkitm_lock;
u32 h2c_cmdcnt;
NDIS_EVENT h2c_cmd_evt;
NDIS_EVENT c2h_set;
NDIS_EVENT h2c_clr;
NDIS_EVENT cpwm_int;
NDIS_EVENT scsir_full_evt;
NDIS_EVENT scsiw_empty_evt;
#endif
u8 *pallocated_mp_xmitframe_buf;
u8 *pmp_xmtframe_buf;
_queue free_mp_xmitqueue;
u32 free_mp_xmitframe_cnt;
MPT_CONTEXT MptCtx;
};
typedef struct _IOCMD_STRUCT_ {
u8 cmdclass;
u16 value;
u8 index;
}IOCMD_STRUCT;
struct rf_reg_param {
u32 path;
u32 offset;
u32 value;
};
struct bb_reg_param {
u32 offset;
u32 value;
};
//=======================================================================
#define LOWER _TRUE
#define RAISE _FALSE
/* Hardware Registers */
#if 0
#if 0
#define IOCMD_CTRL_REG 0x102502C0
#define IOCMD_DATA_REG 0x102502C4
#else
#define IOCMD_CTRL_REG 0x10250370
#define IOCMD_DATA_REG 0x10250374
#endif
#define IOCMD_GET_THERMAL_METER 0xFD000028
#define IOCMD_CLASS_BB_RF 0xF0
#define IOCMD_BB_READ_IDX 0x00
#define IOCMD_BB_WRITE_IDX 0x01
#define IOCMD_RF_READ_IDX 0x02
#define IOCMD_RF_WRIT_IDX 0x03
#endif
#define BB_REG_BASE_ADDR 0x800
/* MP variables */
#if 0
#define _2MAC_MODE_ 0
#define _LOOPBOOK_MODE_ 1
#endif
typedef enum _MP_MODE_ {
MP_OFF,
MP_ON,
MP_ERR,
MP_CONTINUOUS_TX,
MP_SINGLE_CARRIER_TX,
MP_CARRIER_SUPPRISSION_TX,
MP_SINGLE_TONE_TX,
MP_PACKET_TX,
MP_PACKET_RX
} MP_MODE;
#define MAX_RF_PATH_NUMS RF_PATH_MAX
extern u8 mpdatarate[NumRates];
/* MP set force data rate base on the definition. */
typedef enum _MPT_RATE_INDEX
{
/* CCK rate. */
MPT_RATE_1M =1 , /* 0 */
MPT_RATE_2M,
MPT_RATE_55M,
MPT_RATE_11M, /* 3 */
/* OFDM rate. */
MPT_RATE_6M, /* 4 */
MPT_RATE_9M,
MPT_RATE_12M,
MPT_RATE_18M,
MPT_RATE_24M,
MPT_RATE_36M,
MPT_RATE_48M,
MPT_RATE_54M, /* 11 */
/* HT rate. */
MPT_RATE_MCS0, /* 12 */
MPT_RATE_MCS1,
MPT_RATE_MCS2,
MPT_RATE_MCS3,
MPT_RATE_MCS4,
MPT_RATE_MCS5,
MPT_RATE_MCS6,
MPT_RATE_MCS7, /* 19 */
MPT_RATE_MCS8,
MPT_RATE_MCS9,
MPT_RATE_MCS10,
MPT_RATE_MCS11,
MPT_RATE_MCS12,
MPT_RATE_MCS13,
MPT_RATE_MCS14,
MPT_RATE_MCS15, /* 27 */
/* VHT rate. Total: 20*/
MPT_RATE_VHT1SS_MCS0 = 100,// To reserve MCS16~MCS31, the index starts from #100.
MPT_RATE_VHT1SS_MCS1, // #101
MPT_RATE_VHT1SS_MCS2,
MPT_RATE_VHT1SS_MCS3,
MPT_RATE_VHT1SS_MCS4,
MPT_RATE_VHT1SS_MCS5,
MPT_RATE_VHT1SS_MCS6, // #106
MPT_RATE_VHT1SS_MCS7,
MPT_RATE_VHT1SS_MCS8,
MPT_RATE_VHT1SS_MCS9,
MPT_RATE_VHT2SS_MCS0,
MPT_RATE_VHT2SS_MCS1, // #111
MPT_RATE_VHT2SS_MCS2,
MPT_RATE_VHT2SS_MCS3,
MPT_RATE_VHT2SS_MCS4,
MPT_RATE_VHT2SS_MCS5,
MPT_RATE_VHT2SS_MCS6, // #116
MPT_RATE_VHT2SS_MCS7,
MPT_RATE_VHT2SS_MCS8,
MPT_RATE_VHT2SS_MCS9,
MPT_RATE_LAST
}MPT_RATE_E, *PMPT_RATE_E;
#define MAX_TX_PWR_INDEX_N_MODE 64 // 0x3F
typedef enum _POWER_MODE_ {
POWER_LOW = 0,
POWER_NORMAL
}POWER_MODE;
// The following enumeration is used to define the value of Reg0xD00[30:28] or JaguarReg0x914[18:16].
typedef enum _OFDM_TX_MODE {
OFDM_ALL_OFF = 0,
OFDM_ContinuousTx = 1,
OFDM_SingleCarrier = 2,
OFDM_SingleTone = 4,
} OFDM_TX_MODE;
#define RX_PKT_BROADCAST 1
#define RX_PKT_DEST_ADDR 2
#define RX_PKT_PHY_MATCH 3
#if 0
#define RPTMaxCount 0x000FFFFF;
// parameter 1 : BitMask
// bit 0 : OFDM PPDU
// bit 1 : OFDM False Alarm
// bit 2 : OFDM MPDU OK
// bit 3 : OFDM MPDU Fail
// bit 4 : CCK PPDU
// bit 5 : CCK False Alarm
// bit 6 : CCK MPDU ok
// bit 7 : CCK MPDU fail
// bit 8 : HT PPDU counter
// bit 9 : HT false alarm
// bit 10 : HT MPDU total
// bit 11 : HT MPDU OK
// bit 12 : HT MPDU fail
// bit 15 : RX full drop
typedef enum _RXPHY_BITMASK_
{
OFDM_PPDU_BIT = 0,
OFDM_FALSE_BIT,
OFDM_MPDU_OK_BIT,
OFDM_MPDU_FAIL_BIT,
CCK_PPDU_BIT,
CCK_FALSE_BIT,
CCK_MPDU_OK_BIT,
CCK_MPDU_FAIL_BIT,
HT_PPDU_BIT,
HT_FALSE_BIT,
HT_MPDU_BIT,
HT_MPDU_OK_BIT,
HT_MPDU_FAIL_BIT,
} RXPHY_BITMASK;
#endif
typedef enum _ENCRY_CTRL_STATE_ {
HW_CONTROL, //hw encryption& decryption
SW_CONTROL, //sw encryption& decryption
HW_ENCRY_SW_DECRY, //hw encryption & sw decryption
SW_ENCRY_HW_DECRY //sw encryption & hw decryption
}ENCRY_CTRL_STATE;
//=======================================================================
//extern struct mp_xmit_frame *alloc_mp_xmitframe(struct mp_priv *pmp_priv);
//extern int free_mp_xmitframe(struct xmit_priv *pxmitpriv, struct mp_xmit_frame *pmp_xmitframe);
extern s32 init_mp_priv(PADAPTER padapter);
extern void free_mp_priv(struct mp_priv *pmp_priv);
extern s32 MPT_InitializeAdapter(PADAPTER padapter, u8 Channel);
extern void MPT_DeInitAdapter(PADAPTER padapter);
extern s32 mp_start_test(PADAPTER padapter);
extern void mp_stop_test(PADAPTER padapter);
//=======================================================================
//extern void IQCalibrateBcut(PADAPTER pAdapter);
//extern u32 bb_reg_read(PADAPTER Adapter, u16 offset);
//extern u8 bb_reg_write(PADAPTER Adapter, u16 offset, u32 value);
//extern u32 rf_reg_read(PADAPTER Adapter, u8 path, u8 offset);
//extern u8 rf_reg_write(PADAPTER Adapter, u8 path, u8 offset, u32 value);
//extern u32 get_bb_reg(PADAPTER Adapter, u16 offset, u32 bitmask);
//extern u8 set_bb_reg(PADAPTER Adapter, u16 offset, u32 bitmask, u32 value);
//extern u32 get_rf_reg(PADAPTER Adapter, u8 path, u8 offset, u32 bitmask);
//extern u8 set_rf_reg(PADAPTER Adapter, u8 path, u8 offset, u32 bitmask, u32 value);
extern u32 _read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask);
extern void _write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val);
extern u32 read_macreg(_adapter *padapter, u32 addr, u32 sz);
extern void write_macreg(_adapter *padapter, u32 addr, u32 val, u32 sz);
extern u32 read_bbreg(_adapter *padapter, u32 addr, u32 bitmask);
extern void write_bbreg(_adapter *padapter, u32 addr, u32 bitmask, u32 val);
extern u32 read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr);
extern void write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 val);
extern void SetChannel(PADAPTER pAdapter);
extern void SetBandwidth(PADAPTER pAdapter);
extern int SetTxPower(PADAPTER pAdapter);
extern void SetAntennaPathPower(PADAPTER pAdapter);
//extern void SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset);
extern void SetDataRate(PADAPTER pAdapter);
extern void SetAntenna(PADAPTER pAdapter);
//extern void SetCrystalCap(PADAPTER pAdapter);
extern s32 SetThermalMeter(PADAPTER pAdapter, u8 target_ther);
extern void GetThermalMeter(PADAPTER pAdapter, u8 *value);
extern void SetContinuousTx(PADAPTER pAdapter, u8 bStart);
extern void SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart);
extern void SetSingleToneTx(PADAPTER pAdapter, u8 bStart);
extern void SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart);
extern void PhySetTxPowerLevel(PADAPTER pAdapter);
extern void fill_txdesc_for_mp(PADAPTER padapter, struct tx_desc *ptxdesc);
extern void SetPacketTx(PADAPTER padapter);
extern void SetPacketRx(PADAPTER pAdapter, u8 bStartRx);
extern void ResetPhyRxPktCount(PADAPTER pAdapter);
extern u32 GetPhyRxPktReceived(PADAPTER pAdapter);
extern u32 GetPhyRxPktCRC32Error(PADAPTER pAdapter);
extern s32 SetPowerTracking(PADAPTER padapter, u8 enable);
extern void GetPowerTracking(PADAPTER padapter, u8 *enable);
extern u32 mp_query_psd(PADAPTER pAdapter, u8 *data);
extern void Hal_SetAntenna(PADAPTER pAdapter);
extern void Hal_SetBandwidth(PADAPTER pAdapter);
extern void Hal_SetTxPower(PADAPTER pAdapter);
extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart);
extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart );
extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart);
extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart);
extern void Hal_SetBandwidth(PADAPTER pAdapter);
extern void Hal_SetDataRate(PADAPTER pAdapter);
extern void Hal_SetChannel(PADAPTER pAdapter);
extern void Hal_SetAntennaPathPower(PADAPTER pAdapter);
extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther);
extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable);
extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable);
extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value);
extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter);
extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14);
extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven);
extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower);
extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower);
extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter);
extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter);
extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart);
extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart);
extern void Hal_ProSetCrystalCap (PADAPTER pAdapter , u32 CrystalCapVal);
extern void _rtw_mp_xmit_priv(struct xmit_priv *pxmitpriv);
extern void MP_PHY_SetRFPathSwitch(PADAPTER pAdapter ,BOOLEAN bMain);
extern ULONG mpt_ProQueryCalTxPower(PADAPTER pAdapter,u8 RfPath);
#endif //_RTW_MP_H_