gnab-rtl8812au/README.md

82 lines
2.3 KiB
Markdown
Raw Normal View History

2013-11-20 20:01:07 +00:00
## Realtek 802.11ac (rtl8812au)
This is a fork of the Realtek 802.11ac (rtl8812au) v4.2.2 (7502.20130507)
driver altered to build on Linux kernel version >= 3.10.
### Purpose
My D-Link DWA-171 wireless dual-band USB adapter needs the Realtek 8812au
driver to work under Linux.
2013-11-21 18:48:29 +00:00
The current rtl8812au version (per nov. 20th 2013) doesn't compile on Linux
kernels >= 3.10 due to a change in the proc entry API, specifically the
deprecation of the `create_proc_entry()` and `create_proc_read_entry()`
2013-11-20 20:01:07 +00:00
functions in favor of the new `proc_create()` function.
2013-11-21 18:48:29 +00:00
### Building
The Makefile is preconfigured to handle most x86/PC versions. If you are compiling for something other than an intel x86 architecture, you need to first select the platform, e.g. for the Raspberry Pi, you need to set the I386 to n and the ARM_RPI to y:
```sh
...
CONFIG_PLATFORM_I386_PC = n
...
CONFIG_PLATFORM_ARM_RPI = y
```
There are many other platforms supported and some other advanced options, e.g. PCI instead of USB, but most won't be needed.
2014-06-01 13:44:49 +00:00
The driver is built by running `make`, and can be tested by loading the
2013-11-21 18:48:29 +00:00
built module using `insmod`:
2013-11-20 20:01:07 +00:00
2013-11-21 18:51:18 +00:00
```sh
$ make
$ sudo insmod 8812au.ko
2013-11-20 20:01:07 +00:00
```
After loading the module, a wireless network interface named __Realtek 802.11n WLAN Adapter__ should be available.
2013-11-21 18:48:29 +00:00
### Installing
Installing the driver is simply a matter of copying the built module
into the correct location and updating module dependencies using `depmod`:
2013-11-21 18:51:18 +00:00
```sh
$ sudo cp 8812au.ko /lib/modules/$(uname -r)/kernel/drivers/net/wireless
2013-11-21 18:51:18 +00:00
$ sudo depmod
2013-11-21 18:48:29 +00:00
```
The driver module should now be loaded automatically.
2015-09-23 09:43:33 +00:00
### DKMS
Automatically rebuilds and installs on kernel updates. DKMS is in official sources of Ubuntu, for installation do:
```sh
$ sudo apt-get install build-essential dkms
```
The driver source mus be copied to /usr/src/8812au-4.2.2
Then add it to DKMS:
```sh
$ sudo dkms add -m 8812au -v 4.2.2
$ sudo dkms build -m 8812au -v 4.2.2
$ sudo dkms install -m 8812au -v 4.2.2
```
Check with:
```sh
$ sudo dkms status
```
Eventually remove from DKMS with:
```sh
$ sudo dkms remove -m 8812au -v 4.2.2 --all
```
2013-11-20 20:01:07 +00:00
### References
- D-Link DWA-171
- [D-Link page](http://www.dlink.com/no/nb/home-solutions/connect/adapters/dwa-171-wireless-ac-dual-band-usb-adapter)
- [wikidevi page](http://wikidevi.com/wiki/D-Link_DWA-171_rev_A1)