mirrors/8821cu-20210916
1
0
Fork 0
mirror of https://github.com/morrownr/8821cu-20210916.git synced 2024-11-22 13:34:47 +00:00
Code Releases Activity
e49409f22c
8821cu-20210916/core/rtw_bt_mp.c
morrownr 1d6ef930b9 initial commit
2022-11-17 08:26:57 -06:00

1576 lines
49 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#include <drv_types.h>
#include <rtw_bt_mp.h>
#if defined(CONFIG_RTL8723B)
#include <rtl8723b_hal.h>
#endif
#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8821A)
void MPh2c_timeout_handle(void *FunctionContext)
{
PADAPTER pAdapter;
PMPT_CONTEXT pMptCtx;
RTW_INFO("[MPT], MPh2c_timeout_handle\n");
pAdapter = (PADAPTER)FunctionContext;
pMptCtx = &pAdapter->mppriv.mpt_ctx;
pMptCtx->bMPh2c_timeout = _TRUE;
if ((_FALSE == pMptCtx->MptH2cRspEvent)
|| ((_TRUE == pMptCtx->MptH2cRspEvent)
&& (_FALSE == pMptCtx->MptBtC2hEvent)))
_rtw_up_sema(&pMptCtx->MPh2c_Sema);
}
u32 WaitC2Hevent(PADAPTER pAdapter, u8 *C2H_event, u32 delay_time)
{
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
pMptCtx->bMPh2c_timeout = _FALSE;
if (pAdapter->registrypriv.mp_mode == 0) {
RTW_INFO("[MPT], Error!! WaitC2Hevent mp_mode == 0!!\n");
return _FALSE;
}
_set_timer(&pMptCtx->MPh2c_timeout_timer, delay_time);
_rtw_down_sema(&pMptCtx->MPh2c_Sema);
if (pMptCtx->bMPh2c_timeout == _TRUE) {
*C2H_event = _FALSE;
return _FALSE;
}
/* for safty, cancel timer here again */
_cancel_timer_ex(&pMptCtx->MPh2c_timeout_timer);
return _TRUE;
}
BT_CTRL_STATUS
mptbt_CheckC2hFrame(
PADAPTER Adapter,
PBT_H2C pH2c,
PBT_EXT_C2H pExtC2h
)
{
BT_CTRL_STATUS c2hStatus = BT_STATUS_C2H_SUCCESS;
/* RTW_INFO("[MPT], MPT rsp C2H hex: %x %x %x %x %x %x\n"), pExtC2h , pExtC2h+1 ,pExtC2h+2 ,pExtC2h+3 ,pExtC2h+4 ,pExtC2h+5); */
RTW_INFO("[MPT], statusCode = 0x%x\n", pExtC2h->statusCode);
RTW_INFO("[MPT], retLen = %d\n", pExtC2h->retLen);
RTW_INFO("[MPT], opCodeVer : req/rsp=%d/%d\n", pH2c->opCodeVer, pExtC2h->opCodeVer);
RTW_INFO("[MPT], reqNum : req/rsp=%d/%d\n", pH2c->reqNum, pExtC2h->reqNum);
if (pExtC2h->reqNum != pH2c->reqNum) {
c2hStatus = BT_STATUS_C2H_REQNUM_MISMATCH;
RTW_INFO("[MPT], Error!! C2H reqNum Mismatch!!\n");
} else if (pExtC2h->opCodeVer != pH2c->opCodeVer) {
c2hStatus = BT_STATUS_OPCODE_L_VERSION_MISMATCH;
RTW_INFO("[MPT], Error!! OPCode version L mismatch!!\n");
}
return c2hStatus;
}
BT_CTRL_STATUS
mptbt_SendH2c(
PADAPTER Adapter,
PBT_H2C pH2c,
u16 h2cCmdLen
)
{
/* KIRQL OldIrql = KeGetCurrentIrql(); */
BT_CTRL_STATUS h2cStatus = BT_STATUS_H2C_SUCCESS;
PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.mpt_ctx);
u8 i;
RTW_INFO("[MPT], mptbt_SendH2c()=========>\n");
/* PlatformResetEvent(&pMptCtx->MptH2cRspEvent); */
/* PlatformResetEvent(&pMptCtx->MptBtC2hEvent); */
/* if(OldIrql == PASSIVE_LEVEL)
* { */
/* RTPRINT_DATA(FMPBT, FMPBT_H2C_CONTENT, ("[MPT], MPT H2C hex:\n"), pH2c, h2cCmdLen); */
for (i = 0; i < BT_H2C_MAX_RETRY; i++) {
RTW_INFO("[MPT], Send H2C command to wifi!!!\n");
pMptCtx->MptH2cRspEvent = _FALSE;
pMptCtx->MptBtC2hEvent = _FALSE;
#if defined(CONFIG_RTL8723B)
rtl8723b_set_FwBtMpOper_cmd(Adapter, pH2c->opCode, pH2c->opCodeVer, pH2c->reqNum, pH2c->buf);
#endif
pMptCtx->h2cReqNum++;
pMptCtx->h2cReqNum %= 16;
if (WaitC2Hevent(Adapter, &pMptCtx->MptH2cRspEvent, 100)) {
RTW_INFO("[MPT], Received WiFi MptH2cRspEvent!!!\n");
if (WaitC2Hevent(Adapter, &pMptCtx->MptBtC2hEvent, 400)) {
RTW_INFO("[MPT], Received MptBtC2hEvent!!!\n");
break;
} else {
RTW_INFO("[MPT], Error!!BT MptBtC2hEvent timeout!!\n");
h2cStatus = BT_STATUS_H2C_BT_NO_RSP;
}
} else {
RTW_INFO("[MPT], Error!!WiFi MptH2cRspEvent timeout!!\n");
h2cStatus = BT_STATUS_H2C_TIMTOUT;
}
}
/* }
* else
* {
* RT_ASSERT(FALSE, ("[MPT], mptbt_SendH2c() can only run under PASSIVE_LEVEL!!\n"));
* h2cStatus = BT_STATUS_WRONG_LEVEL;
* } */
RTW_INFO("[MPT], mptbt_SendH2c()<=========\n");
return h2cStatus;
}
BT_CTRL_STATUS
mptbt_CheckBtRspStatus(
PADAPTER Adapter,
PBT_EXT_C2H pExtC2h
)
{
BT_CTRL_STATUS retStatus = BT_OP_STATUS_SUCCESS;
switch (pExtC2h->statusCode) {
case BT_OP_STATUS_SUCCESS:
retStatus = BT_STATUS_BT_OP_SUCCESS;
RTW_INFO("[MPT], BT status : BT_STATUS_SUCCESS\n");
break;
case BT_OP_STATUS_VERSION_MISMATCH:
retStatus = BT_STATUS_OPCODE_L_VERSION_MISMATCH;
RTW_INFO("[MPT], BT status : BT_STATUS_OPCODE_L_VERSION_MISMATCH\n");
break;
case BT_OP_STATUS_UNKNOWN_OPCODE:
retStatus = BT_STATUS_UNKNOWN_OPCODE_L;
RTW_INFO("[MPT], BT status : BT_STATUS_UNKNOWN_OPCODE_L\n");
break;
case BT_OP_STATUS_ERROR_PARAMETER:
retStatus = BT_STATUS_PARAMETER_FORMAT_ERROR_L;
RTW_INFO("[MPT], BT status : BT_STATUS_PARAMETER_FORMAT_ERROR_L\n");
break;
default:
retStatus = BT_STATUS_UNKNOWN_STATUS_L;
RTW_INFO("[MPT], BT status : BT_STATUS_UNKNOWN_STATUS_L\n");
break;
}
return retStatus;
}
BT_CTRL_STATUS
mptbt_BtFwOpCodeProcess(
PADAPTER Adapter,
u8 btFwOpCode,
u8 opCodeVer,
u8 *pH2cPar,
u8 h2cParaLen
)
{
u8 H2C_Parameter[6] = {0};
PBT_H2C pH2c = (PBT_H2C)&H2C_Parameter[0];
PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.mpt_ctx);
PBT_EXT_C2H pExtC2h = (PBT_EXT_C2H)&pMptCtx->c2hBuf[0];
u16 paraLen = 0, i;
BT_CTRL_STATUS h2cStatus = BT_STATUS_H2C_SUCCESS, c2hStatus = BT_STATUS_C2H_SUCCESS;
BT_CTRL_STATUS retStatus = BT_STATUS_H2C_BT_NO_RSP;
if (Adapter->registrypriv.mp_mode == 0) {
RTW_INFO("[MPT], Error!! mptbt_BtFwOpCodeProces mp_mode == 0!!\n");
return _FALSE;
}
pH2c->opCode = btFwOpCode;
pH2c->opCodeVer = opCodeVer;
pH2c->reqNum = pMptCtx->h2cReqNum;
/* PlatformMoveMemory(&pH2c->buf[0], pH2cPar, h2cParaLen); */
/* _rtw_memcpy(&pH2c->buf[0], pH2cPar, h2cParaLen); */
_rtw_memcpy(pH2c->buf, pH2cPar, h2cParaLen);
RTW_INFO("[MPT], pH2c->opCode=%d\n", pH2c->opCode);
RTW_INFO("[MPT], pH2c->opCodeVer=%d\n", pH2c->opCodeVer);
RTW_INFO("[MPT], pH2c->reqNum=%d\n", pH2c->reqNum);
RTW_INFO("[MPT], h2c parameter length=%d\n", h2cParaLen);
for (i = 0; i < h2cParaLen; i++)
RTW_INFO("[MPT], parameter[%d]=0x%02x\n", i, pH2c->buf[i]);
h2cStatus = mptbt_SendH2c(Adapter, pH2c, h2cParaLen + 2);
if (BT_STATUS_H2C_SUCCESS == h2cStatus) {
/* if reach here, it means H2C get the correct c2h response, */
c2hStatus = mptbt_CheckC2hFrame(Adapter, pH2c, pExtC2h);
if (BT_STATUS_C2H_SUCCESS == c2hStatus)
retStatus = mptbt_CheckBtRspStatus(Adapter, pExtC2h);
else {
RTW_INFO("[MPT], Error!! C2H failed for pH2c->opCode=%d\n", pH2c->opCode);
/* check c2h status error, return error status code to upper layer. */
retStatus = c2hStatus;
}
} else {
RTW_INFO("[MPT], Error!! H2C failed for pH2c->opCode=%d\n", pH2c->opCode);
/* check h2c status error, return error status code to upper layer. */
retStatus = h2cStatus;
}
return retStatus;
}
u16
mptbt_BtReady(
PADAPTER Adapter,
PBT_REQ_CMD pBtReq,
PBT_RSP_CMD pBtRsp
)
{
u8 h2cParaBuf[6] = {0};
u8 h2cParaLen = 0;
u16 paraLen = 0;
u8 retStatus = BT_STATUS_BT_OP_SUCCESS;
u8 btOpcode;
u8 btOpcodeVer = 0;
PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.mpt_ctx);
PBT_EXT_C2H pExtC2h = (PBT_EXT_C2H)&pMptCtx->c2hBuf[0];
u8 i;
u8 btFwVer = 0, bdAddr[6] = {0};
u16 btRealFwVer = 0;
u16 *pu2Tmp = NULL;
/* */
/* check upper layer parameters */
/* */
/* 1. check upper layer opcode version */
if (pBtReq->opCodeVer != 1) {
RTW_INFO("[MPT], Error!! Upper OP code version not match!!!\n");
pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
return paraLen;
}
pBtRsp->pParamStart[0] = MP_BT_NOT_READY;
paraLen = 10;
/* */
/* execute lower layer opcodes */
/* */
/* Get BT FW version */
/* fill h2c parameters */
btOpcode = BT_LO_OP_GET_BT_VERSION;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
} else {
pu2Tmp = (u16 *)&pExtC2h->buf[0];
btRealFwVer = *pu2Tmp;
btFwVer = pExtC2h->buf[1];
RTW_INFO("[MPT], btRealFwVer=0x%x, btFwVer=0x%x\n", btRealFwVer, btFwVer);
}
/* Get BD Address */
/* fill h2c parameters */
btOpcode = BT_LO_OP_GET_BD_ADDR_L;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
} else {
bdAddr[5] = pExtC2h->buf[0];
bdAddr[4] = pExtC2h->buf[1];
bdAddr[3] = pExtC2h->buf[2];
}
/* fill h2c parameters */
btOpcode = BT_LO_OP_GET_BD_ADDR_H;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
} else {
bdAddr[2] = pExtC2h->buf[0];
bdAddr[1] = pExtC2h->buf[1];
bdAddr[0] = pExtC2h->buf[2];
}
RTW_INFO("[MPT], Local BDAddr:");
for (i = 0; i < 6; i++)
RTW_INFO(" 0x%x ", bdAddr[i]);
pBtRsp->status = BT_STATUS_SUCCESS;
pBtRsp->pParamStart[0] = MP_BT_READY;
pu2Tmp = (u16 *)&pBtRsp->pParamStart[1];
*pu2Tmp = btRealFwVer;
pBtRsp->pParamStart[3] = btFwVer;
for (i = 0; i < 6; i++)
pBtRsp->pParamStart[4 + i] = bdAddr[5 - i];
return paraLen;
}
void mptbt_close_WiFiRF(PADAPTER Adapter)
{
phy_set_bb_reg(Adapter, 0x824, 0xF, 0x0);
phy_set_bb_reg(Adapter, 0x824, 0x700000, 0x0);
phy_set_rf_reg(Adapter, RF_PATH_A, 0x0, 0xF0000, 0x0);
}
void mptbt_open_WiFiRF(PADAPTER Adapter)
{
phy_set_bb_reg(Adapter, 0x824, 0x700000, 0x3);
phy_set_bb_reg(Adapter, 0x824, 0xF, 0x2);
phy_set_rf_reg(Adapter, RF_PATH_A, 0x0, 0xF0000, 0x3);
}
u32 mptbt_switch_RF(PADAPTER Adapter, u8 Enter)
{
u16 tmp_2byte = 0;
/* Enter test mode */
if (Enter) {
/* 1>. close WiFi RF */
mptbt_close_WiFiRF(Adapter);
/* 2>. change ant switch to BT */
tmp_2byte = rtw_read16(Adapter, 0x860);
tmp_2byte = tmp_2byte | BIT(9);
tmp_2byte = tmp_2byte & (~BIT(8));
rtw_write16(Adapter, 0x860, tmp_2byte);
rtw_write16(Adapter, 0x870, 0x300);
} else {
/* 1>. Open WiFi RF */
mptbt_open_WiFiRF(Adapter);
/* 2>. change ant switch back */
tmp_2byte = rtw_read16(Adapter, 0x860);
tmp_2byte = tmp_2byte | BIT(8);
tmp_2byte = tmp_2byte & (~BIT(9));
rtw_write16(Adapter, 0x860, tmp_2byte);
rtw_write16(Adapter, 0x870, 0x300);
}
return 0;
}
u16
mptbt_BtSetMode(
PADAPTER Adapter,
PBT_REQ_CMD pBtReq,
PBT_RSP_CMD pBtRsp
)
{
u8 h2cParaBuf[6] = {0};
u8 h2cParaLen = 0;
u16 paraLen = 0;
u8 retStatus = BT_STATUS_BT_OP_SUCCESS;
u8 btOpcode;
u8 btOpcodeVer = 0;
u8 btModeToSet = 0;
/* */
/* check upper layer parameters */
/* */
/* 1. check upper layer opcode version */
if (pBtReq->opCodeVer != 1) {
RTW_INFO("[MPT], Error!! Upper OP code version not match!!!\n");
pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
return paraLen;
}
/* 2. check upper layer parameter length */
if (1 == pBtReq->paraLength) {
btModeToSet = pBtReq->pParamStart[0];
RTW_INFO("[MPT], BtTestMode=%d\n", btModeToSet);
} else {
RTW_INFO("[MPT], Error!! wrong parameter length=%d (should be 1)\n", pBtReq->paraLength);
pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
return paraLen;
}
/* */
/* execute lower layer opcodes */
/* */
/* 1. fill h2c parameters */
/* check bt mode */
btOpcode = BT_LO_OP_SET_BT_MODE;
if (btModeToSet >= MP_BT_MODE_MAX) {
pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
} else {
mptbt_switch_RF(Adapter, 1);
h2cParaBuf[0] = btModeToSet;
h2cParaLen = 1;
/* 2. execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* 3. construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS == retStatus)
pBtRsp->status = BT_STATUS_SUCCESS;
else {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
}
return paraLen;
}
void
MPTBT_FwC2hBtMpCtrl(
PADAPTER Adapter,
u8 *tmpBuf,
u8 length
)
{
u32 i;
PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.mpt_ctx);
PBT_EXT_C2H pExtC2h = (PBT_EXT_C2H)tmpBuf;
if (GET_HAL_DATA(Adapter)->bBTFWReady == _FALSE || Adapter->registrypriv.mp_mode == 0) {
/* RTW_INFO("Ignore C2H BT MP Info since not in MP mode\n"); */
return;
}
if (length > 32 || length < 3) {
RTW_INFO("\n [MPT], pExtC2h->buf hex: length=%d > 32 || < 3\n", length);
return;
}
/* cancel_timeout for h2c handle */
_cancel_timer_ex(&pMptCtx->MPh2c_timeout_timer);
for (i = 0; i < length; i++)
RTW_INFO("[MPT], %s, buf[%d]=0x%02x ", __FUNCTION__, i, tmpBuf[i]);
RTW_INFO("[MPT], pExtC2h->extendId=0x%x\n", pExtC2h->extendId);
switch (pExtC2h->extendId) {
case EXT_C2H_WIFI_FW_ACTIVE_RSP:
RTW_INFO("[MPT], EXT_C2H_WIFI_FW_ACTIVE_RSP\n");
#if 0
RTW_INFO("[MPT], pExtC2h->buf hex:\n");
for (i = 0; i < (length - 3); i++)
RTW_INFO(" 0x%x ", pExtC2h->buf[i]);
#endif
if ((_FALSE == pMptCtx->bMPh2c_timeout)
&& (_FALSE == pMptCtx->MptH2cRspEvent)) {
pMptCtx->MptH2cRspEvent = _TRUE;
_rtw_up_sema(&pMptCtx->MPh2c_Sema);
}
break;
case EXT_C2H_TRIG_BY_BT_FW:
RTW_INFO("[MPT], EXT_C2H_TRIG_BY_BT_FW\n");
_rtw_memcpy(&pMptCtx->c2hBuf[0], tmpBuf, length);
RTW_INFO("[MPT], pExtC2h->statusCode=0x%x\n", pExtC2h->statusCode);
RTW_INFO("[MPT], pExtC2h->retLen=0x%x\n", pExtC2h->retLen);
RTW_INFO("[MPT], pExtC2h->opCodeVer=0x%x\n", pExtC2h->opCodeVer);
RTW_INFO("[MPT], pExtC2h->reqNum=0x%x\n", pExtC2h->reqNum);
for (i = 0; i < (length - 3); i++)
RTW_INFO("[MPT], pExtC2h->buf[%d]=0x%02x\n", i, pExtC2h->buf[i]);
if ((_FALSE == pMptCtx->bMPh2c_timeout)
&& (_TRUE == pMptCtx->MptH2cRspEvent)
&& (_FALSE == pMptCtx->MptBtC2hEvent)) {
pMptCtx->MptBtC2hEvent = _TRUE;
_rtw_up_sema(&pMptCtx->MPh2c_Sema);
}
break;
default:
RTW_INFO("[MPT], EXT_C2H Target not found,pExtC2h->extendId =%d ,pExtC2h->reqNum=%d\n", pExtC2h->extendId, pExtC2h->reqNum);
break;
}
}
u16
mptbt_BtGetGeneral(
PADAPTER Adapter,
PBT_REQ_CMD pBtReq,
PBT_RSP_CMD pBtRsp
)
{
PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.mpt_ctx);
PBT_EXT_C2H pExtC2h = (PBT_EXT_C2H)&pMptCtx->c2hBuf[0];
u8 h2cParaBuf[6] = {0};
u8 h2cParaLen = 0;
u16 paraLen = 0;
u8 retStatus = BT_STATUS_BT_OP_SUCCESS;
u8 btOpcode, bdAddr[6] = {0};
u8 btOpcodeVer = 0;
u8 getType = 0, i;
u16 getParaLen = 0, validParaLen = 0;
u8 regType = 0, reportType = 0;
u32 regAddr = 0, regValue = 0;
u32 *pu4Tmp;
u16 *pu2Tmp;
u8 *pu1Tmp;
/* */
/* check upper layer parameters */
/* */
/* check upper layer opcode version */
if (pBtReq->opCodeVer != 1) {
RTW_INFO("[MPT], Error!! Upper OP code version not match!!!\n");
pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
return paraLen;
}
/* check upper layer parameter length */
if (pBtReq->paraLength < 1) {
RTW_INFO("[MPT], Error!! wrong parameter length=%d (should larger than 1)\n", pBtReq->paraLength);
pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
return paraLen;
}
getParaLen = pBtReq->paraLength - 1;
getType = pBtReq->pParamStart[0];
RTW_INFO("[MPT], getType=%d, getParaLen=%d\n", getType, getParaLen);
/* check parameter first */
switch (getType) {
case BT_GGET_REG:
RTW_INFO("[MPT], [BT_GGET_REG]\n");
validParaLen = 5;
if (getParaLen == validParaLen) {
btOpcode = BT_LO_OP_READ_REG;
regType = pBtReq->pParamStart[1];
pu4Tmp = (u32 *)&pBtReq->pParamStart[2];
regAddr = *pu4Tmp;
RTW_INFO("[MPT], BT_GGET_REG regType=0x%02x, regAddr=0x%08x!!\n",
regType, regAddr);
if (regType >= BT_REG_MAX) {
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
} else {
if (((BT_REG_RF == regType) && (regAddr > 0x7f)) ||
((BT_REG_MODEM == regType) && (regAddr > 0x1ff)) ||
((BT_REG_BLUEWIZE == regType) && (regAddr > 0xfff)) ||
((BT_REG_VENDOR == regType) && (regAddr > 0xfff)) ||
((BT_REG_LE == regType) && (regAddr > 0xfff))) {
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
}
}
break;
case BT_GGET_STATUS:
RTW_INFO("[MPT], [BT_GGET_STATUS]\n");
validParaLen = 0;
break;
case BT_GGET_REPORT:
RTW_INFO("[MPT], [BT_GGET_REPORT]\n");
validParaLen = 1;
if (getParaLen == validParaLen) {
reportType = pBtReq->pParamStart[1];
RTW_INFO("[MPT], BT_GGET_REPORT reportType=0x%x!!\n", reportType);
if (reportType >= BT_REPORT_MAX) {
pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
}
break;
default: {
RTW_INFO("[MPT], Error!! getType=%d, out of range\n", getType);
pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
break;
}
if (getParaLen != validParaLen) {
RTW_INFO("[MPT], Error!! wrong parameter length=%d for BT_GET_GEN_CMD cmd id=0x%x, paraLen should=0x%x\n",
getParaLen, getType, validParaLen);
pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
return paraLen;
}
/* */
/* execute lower layer opcodes */
/* */
if (BT_GGET_REG == getType) {
/* fill h2c parameters */
/* here we should write reg value first then write the address, adviced by Austin */
btOpcode = BT_LO_OP_READ_REG;
h2cParaBuf[0] = regType;
h2cParaBuf[1] = pBtReq->pParamStart[2];
h2cParaBuf[2] = pBtReq->pParamStart[3];
h2cParaLen = 3;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pu2Tmp = (u16 *)&pExtC2h->buf[0];
regValue = *pu2Tmp;
RTW_INFO("[MPT], read reg regType=0x%02x, regAddr=0x%08x, regValue=0x%04x\n",
regType, regAddr, regValue);
pu4Tmp = (u32 *)&pBtRsp->pParamStart[0];
*pu4Tmp = regValue;
paraLen = 4;
} else if (BT_GGET_STATUS == getType) {
btOpcode = BT_LO_OP_GET_BT_STATUS;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->pParamStart[0] = pExtC2h->buf[0];
pBtRsp->pParamStart[1] = pExtC2h->buf[1];
RTW_INFO("[MPT], read bt status, testMode=0x%x, testStatus=0x%x\n",
pBtRsp->pParamStart[0], pBtRsp->pParamStart[1]);
paraLen = 2;
} else if (BT_GGET_REPORT == getType) {
switch (reportType) {
case BT_REPORT_RX_PACKET_CNT: {
RTW_INFO("[MPT], [Rx Packet Counts]\n");
btOpcode = BT_LO_OP_GET_RX_PKT_CNT_L;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->pParamStart[0] = pExtC2h->buf[0];
pBtRsp->pParamStart[1] = pExtC2h->buf[1];
btOpcode = BT_LO_OP_GET_RX_PKT_CNT_H;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->pParamStart[2] = pExtC2h->buf[0];
pBtRsp->pParamStart[3] = pExtC2h->buf[1];
paraLen = 4;
}
break;
case BT_REPORT_RX_ERROR_BITS: {
RTW_INFO("[MPT], [Rx Error Bits]\n");
btOpcode = BT_LO_OP_GET_RX_ERROR_BITS_L;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->pParamStart[0] = pExtC2h->buf[0];
pBtRsp->pParamStart[1] = pExtC2h->buf[1];
btOpcode = BT_LO_OP_GET_RX_ERROR_BITS_H;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->pParamStart[2] = pExtC2h->buf[0];
pBtRsp->pParamStart[3] = pExtC2h->buf[1];
paraLen = 4;
}
break;
case BT_REPORT_RSSI: {
RTW_INFO("[MPT], [RSSI]\n");
btOpcode = BT_LO_OP_GET_RSSI;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->pParamStart[0] = pExtC2h->buf[0];
pBtRsp->pParamStart[1] = pExtC2h->buf[1];
paraLen = 2;
}
break;
case BT_REPORT_CFO_HDR_QUALITY: {
RTW_INFO("[MPT], [CFO & Header Quality]\n");
btOpcode = BT_LO_OP_GET_CFO_HDR_QUALITY_L;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->pParamStart[0] = pExtC2h->buf[0];
pBtRsp->pParamStart[1] = pExtC2h->buf[1];
btOpcode = BT_LO_OP_GET_CFO_HDR_QUALITY_H;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->pParamStart[2] = pExtC2h->buf[0];
pBtRsp->pParamStart[3] = pExtC2h->buf[1];
paraLen = 4;
}
break;
case BT_REPORT_CONNECT_TARGET_BD_ADDR: {
RTW_INFO("[MPT], [Connected Target BD ADDR]\n");
btOpcode = BT_LO_OP_GET_TARGET_BD_ADDR_L;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
bdAddr[5] = pExtC2h->buf[0];
bdAddr[4] = pExtC2h->buf[1];
bdAddr[3] = pExtC2h->buf[2];
btOpcode = BT_LO_OP_GET_TARGET_BD_ADDR_H;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
bdAddr[2] = pExtC2h->buf[0];
bdAddr[1] = pExtC2h->buf[1];
bdAddr[0] = pExtC2h->buf[2];
RTW_INFO("[MPT], Connected Target BDAddr:%s", bdAddr);
for (i = 0; i < 6; i++)
pBtRsp->pParamStart[i] = bdAddr[5 - i];
paraLen = 6;
}
break;
default:
pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
break;
}
}
pBtRsp->status = BT_STATUS_SUCCESS;
return paraLen;
}
u16
mptbt_BtSetGeneral(
PADAPTER Adapter,
PBT_REQ_CMD pBtReq,
PBT_RSP_CMD pBtRsp
)
{
u8 h2cParaBuf[6] = {0};
u8 h2cParaLen = 0;
u16 paraLen = 0;
u8 retStatus = BT_STATUS_BT_OP_SUCCESS;
u8 btOpcode;
u8 btOpcodeVer = 0;
u8 setType = 0;
u16 setParaLen = 0, validParaLen = 0;
u8 regType = 0, bdAddr[6] = {0}, calVal = 0;
u32 regAddr = 0, regValue = 0;
u32 *pu4Tmp;
u16 *pu2Tmp;
u8 *pu1Tmp;
/* */
/* check upper layer parameters */
/* */
/* check upper layer opcode version */
if (pBtReq->opCodeVer != 1) {
RTW_INFO("[MPT], Error!! Upper OP code version not match!!!\n");
pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
return paraLen;
}
/* check upper layer parameter length */
if (pBtReq->paraLength < 1) {
RTW_INFO("[MPT], Error!! wrong parameter length=%d (should larger than 1)\n", pBtReq->paraLength);
pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
return paraLen;
}
setParaLen = pBtReq->paraLength - 1;
setType = pBtReq->pParamStart[0];
RTW_INFO("[MPT], setType=%d, setParaLen=%d\n", setType, setParaLen);
/* check parameter first */
switch (setType) {
case BT_GSET_REG:
RTW_INFO("[MPT], [BT_GSET_REG]\n");
validParaLen = 9;
if (setParaLen == validParaLen) {
btOpcode = BT_LO_OP_WRITE_REG_VALUE;
regType = pBtReq->pParamStart[1];
pu4Tmp = (u32 *)&pBtReq->pParamStart[2];
regAddr = *pu4Tmp;
pu4Tmp = (u32 *)&pBtReq->pParamStart[6];
regValue = *pu4Tmp;
RTW_INFO("[MPT], BT_GSET_REG regType=0x%x, regAddr=0x%x, regValue=0x%x!!\n",
regType, regAddr, regValue);
if (regType >= BT_REG_MAX) {
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
} else {
if (((BT_REG_RF == regType) && (regAddr > 0x7f)) ||
((BT_REG_MODEM == regType) && (regAddr > 0x1ff)) ||
((BT_REG_BLUEWIZE == regType) && (regAddr > 0xfff)) ||
((BT_REG_VENDOR == regType) && (regAddr > 0xfff)) ||
((BT_REG_LE == regType) && (regAddr > 0xfff))) {
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
}
}
break;
case BT_GSET_RESET:
RTW_INFO("[MPT], [BT_GSET_RESET]\n");
validParaLen = 0;
break;
case BT_GSET_TARGET_BD_ADDR:
RTW_INFO("[MPT], [BT_GSET_TARGET_BD_ADDR]\n");
validParaLen = 6;
if (setParaLen == validParaLen) {
btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_H;
if ((pBtReq->pParamStart[1] == 0) &&
(pBtReq->pParamStart[2] == 0) &&
(pBtReq->pParamStart[3] == 0) &&
(pBtReq->pParamStart[4] == 0) &&
(pBtReq->pParamStart[5] == 0) &&
(pBtReq->pParamStart[6] == 0)) {
RTW_INFO("[MPT], Error!! targetBDAddr=all zero\n");
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
if ((pBtReq->pParamStart[1] == 0xff) &&
(pBtReq->pParamStart[2] == 0xff) &&
(pBtReq->pParamStart[3] == 0xff) &&
(pBtReq->pParamStart[4] == 0xff) &&
(pBtReq->pParamStart[5] == 0xff) &&
(pBtReq->pParamStart[6] == 0xff)) {
RTW_INFO("[MPT], Error!! targetBDAddr=all 0xf\n");
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
bdAddr[0] = pBtReq->pParamStart[6];
bdAddr[1] = pBtReq->pParamStart[5];
bdAddr[2] = pBtReq->pParamStart[4];
bdAddr[3] = pBtReq->pParamStart[3];
bdAddr[4] = pBtReq->pParamStart[2];
bdAddr[5] = pBtReq->pParamStart[1];
RTW_INFO("[MPT], target BDAddr:%x,%x,%x,%x,%x,%x\n",
bdAddr[0], bdAddr[1], bdAddr[2], bdAddr[3], bdAddr[4], bdAddr[5]);
}
break;
case BT_GSET_TX_PWR_FINETUNE:
RTW_INFO("[MPT], [BT_GSET_TX_PWR_FINETUNE]\n");
validParaLen = 1;
if (setParaLen == validParaLen) {
btOpcode = BT_LO_OP_SET_TX_POWER_CALIBRATION;
calVal = pBtReq->pParamStart[1];
if ((calVal < 1) || (calVal > 9)) {
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
RTW_INFO("[MPT], calVal=%d\n", calVal);
}
break;
case BT_SET_TRACKING_INTERVAL:
RTW_INFO("[MPT], [BT_SET_TRACKING_INTERVAL] setParaLen =%d\n", setParaLen);
validParaLen = 1;
if (setParaLen == validParaLen)
calVal = pBtReq->pParamStart[1];
break;
case BT_SET_THERMAL_METER:
RTW_INFO("[MPT], [BT_SET_THERMAL_METER] setParaLen =%d\n", setParaLen);
validParaLen = 1;
if (setParaLen == validParaLen)
calVal = pBtReq->pParamStart[1];
break;
case BT_ENABLE_CFO_TRACKING:
RTW_INFO("[MPT], [BT_ENABLE_CFO_TRACKING] setParaLen =%d\n", setParaLen);
validParaLen = 1;
if (setParaLen == validParaLen)
calVal = pBtReq->pParamStart[1];
break;
case BT_GSET_UPDATE_BT_PATCH:
break;
default: {
RTW_INFO("[MPT], Error!! setType=%d, out of range\n", setType);
pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
break;
}
if (setParaLen != validParaLen) {
RTW_INFO("[MPT], Error!! wrong parameter length=%d for BT_SET_GEN_CMD cmd id=0x%x, paraLen should=0x%x\n",
setParaLen, setType, validParaLen);
pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
return paraLen;
}
/* */
/* execute lower layer opcodes */
/* */
if (BT_GSET_REG == setType) {
/* fill h2c parameters */
/* here we should write reg value first then write the address, adviced by Austin */
btOpcode = BT_LO_OP_WRITE_REG_VALUE;
h2cParaBuf[0] = pBtReq->pParamStart[6];
h2cParaBuf[1] = pBtReq->pParamStart[7];
h2cParaBuf[2] = pBtReq->pParamStart[8];
h2cParaLen = 3;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
/* write reg address */
btOpcode = BT_LO_OP_WRITE_REG_ADDR;
h2cParaBuf[0] = regType;
h2cParaBuf[1] = pBtReq->pParamStart[2];
h2cParaBuf[2] = pBtReq->pParamStart[3];
h2cParaLen = 3;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
} else if (BT_GSET_RESET == setType) {
btOpcode = BT_LO_OP_RESET;
h2cParaLen = 0;
/* execute h2c and check respond c2h from bt fw is correct or not */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
} else if (BT_GSET_TARGET_BD_ADDR == setType) {
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_L;
h2cParaBuf[0] = pBtReq->pParamStart[1];
h2cParaBuf[1] = pBtReq->pParamStart[2];
h2cParaBuf[2] = pBtReq->pParamStart[3];
h2cParaLen = 3;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_H;
h2cParaBuf[0] = pBtReq->pParamStart[4];
h2cParaBuf[1] = pBtReq->pParamStart[5];
h2cParaBuf[2] = pBtReq->pParamStart[6];
h2cParaLen = 3;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
} else if (BT_GSET_TX_PWR_FINETUNE == setType) {
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_TX_POWER_CALIBRATION;
h2cParaBuf[0] = calVal;
h2cParaLen = 1;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
} else if (BT_SET_TRACKING_INTERVAL == setType) {
/* BT_LO_OP_SET_TRACKING_INTERVAL = 0x22, */
/* BT_LO_OP_SET_THERMAL_METER = 0x23, */
/* BT_LO_OP_ENABLE_CFO_TRACKING = 0x24, */
btOpcode = BT_LO_OP_SET_TRACKING_INTERVAL;
h2cParaBuf[0] = calVal;
h2cParaLen = 1;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
} else if (BT_SET_THERMAL_METER == setType) {
btOpcode = BT_LO_OP_SET_THERMAL_METER;
h2cParaBuf[0] = calVal;
h2cParaLen = 1;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
} else if (BT_ENABLE_CFO_TRACKING == setType) {
btOpcode = BT_LO_OP_ENABLE_CFO_TRACKING;
h2cParaBuf[0] = calVal;
h2cParaLen = 1;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
}
pBtRsp->status = BT_STATUS_SUCCESS;
return paraLen;
}
u16
mptbt_BtSetTxRxPars(
PADAPTER Adapter,
PBT_REQ_CMD pBtReq,
PBT_RSP_CMD pBtRsp
)
{
u8 h2cParaBuf[6] = {0};
u8 h2cParaLen = 0;
u16 paraLen = 0;
u8 retStatus = BT_STATUS_BT_OP_SUCCESS;
u8 btOpcode;
u8 btOpcodeVer = 0;
PBT_TXRX_PARAMETERS pTxRxPars = (PBT_TXRX_PARAMETERS)&pBtReq->pParamStart[0];
u16 lenTxRx = sizeof(BT_TXRX_PARAMETERS);
u8 i;
u8 bdAddr[6] = {0};
/* */
/* check upper layer parameters */
/* */
/* 1. check upper layer opcode version */
if (pBtReq->opCodeVer != 1) {
RTW_INFO("[MPT], Error!! Upper OP code version not match!!!\n");
pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
return paraLen;
}
/* 2. check upper layer parameter length */
if (pBtReq->paraLength == sizeof(BT_TXRX_PARAMETERS)) {
RTW_INFO("[MPT], pTxRxPars->txrxChannel=0x%x\n", pTxRxPars->txrxChannel);
RTW_INFO("[MPT], pTxRxPars->txrxTxPktCnt=0x%8x\n", pTxRxPars->txrxTxPktCnt);
RTW_INFO("[MPT], pTxRxPars->txrxTxPktInterval=0x%x\n", pTxRxPars->txrxTxPktInterval);
RTW_INFO("[MPT], pTxRxPars->txrxPayloadType=0x%x\n", pTxRxPars->txrxPayloadType);
RTW_INFO("[MPT], pTxRxPars->txrxPktType=0x%x\n", pTxRxPars->txrxPktType);
RTW_INFO("[MPT], pTxRxPars->txrxPayloadLen=0x%x\n", pTxRxPars->txrxPayloadLen);
RTW_INFO("[MPT], pTxRxPars->txrxPktHeader=0x%x\n", pTxRxPars->txrxPktHeader);
RTW_INFO("[MPT], pTxRxPars->txrxWhitenCoeff=0x%x\n", pTxRxPars->txrxWhitenCoeff);
bdAddr[0] = pTxRxPars->txrxBdaddr[5];
bdAddr[1] = pTxRxPars->txrxBdaddr[4];
bdAddr[2] = pTxRxPars->txrxBdaddr[3];
bdAddr[3] = pTxRxPars->txrxBdaddr[2];
bdAddr[4] = pTxRxPars->txrxBdaddr[1];
bdAddr[5] = pTxRxPars->txrxBdaddr[0];
RTW_INFO("[MPT], pTxRxPars->txrxBdaddr: %s", &bdAddr[0]);
RTW_INFO("[MPT], pTxRxPars->txrxTxGainIndex=0x%x\n", pTxRxPars->txrxTxGainIndex);
} else {
RTW_INFO("[MPT], Error!! pBtReq->paraLength=%d, correct Len=%d\n", pBtReq->paraLength, lenTxRx);
pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
return paraLen;
}
/* */
/* execute lower layer opcodes */
/* */
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_PKT_HEADER;
if (pTxRxPars->txrxPktHeader > 0x3ffff) {
RTW_INFO("[MPT], Error!! pTxRxPars->txrxPktHeader=0x%x is out of range, (should be between 0x0~0x3ffff)\n", pTxRxPars->txrxPktHeader);
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
} else {
h2cParaBuf[0] = (u8)(pTxRxPars->txrxPktHeader & 0xff);
h2cParaBuf[1] = (u8)((pTxRxPars->txrxPktHeader & 0xff00) >> 8);
h2cParaBuf[2] = (u8)((pTxRxPars->txrxPktHeader & 0xff0000) >> 16);
h2cParaLen = 3;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_PKT_TYPE_LEN;
{
u16 payloadLenLimit = 0;
switch (pTxRxPars->txrxPktType) {
case MP_BT_PKT_DH1:
payloadLenLimit = 27 * 8;
break;
case MP_BT_PKT_DH3:
payloadLenLimit = 183 * 8;
break;
case MP_BT_PKT_DH5:
payloadLenLimit = 339 * 8;
break;
case MP_BT_PKT_2DH1:
payloadLenLimit = 54 * 8;
break;
case MP_BT_PKT_2DH3:
payloadLenLimit = 367 * 8;
break;
case MP_BT_PKT_2DH5:
payloadLenLimit = 679 * 8;
break;
case MP_BT_PKT_3DH1:
payloadLenLimit = 83 * 8;
break;
case MP_BT_PKT_3DH3:
payloadLenLimit = 552 * 8;
break;
case MP_BT_PKT_3DH5:
payloadLenLimit = 1021 * 8;
break;
case MP_BT_PKT_LE:
payloadLenLimit = 39 * 8;
break;
default: {
RTW_INFO("[MPT], Error!! Unknown pTxRxPars->txrxPktType=0x%x\n", pTxRxPars->txrxPktType);
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
break;
}
if (pTxRxPars->txrxPayloadLen > payloadLenLimit) {
RTW_INFO("[MPT], Error!! pTxRxPars->txrxPayloadLen=0x%x, (should smaller than %d)\n",
pTxRxPars->txrxPayloadLen, payloadLenLimit);
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
h2cParaBuf[0] = pTxRxPars->txrxPktType;
h2cParaBuf[1] = (u8)((pTxRxPars->txrxPayloadLen & 0xff));
h2cParaBuf[2] = (u8)((pTxRxPars->txrxPayloadLen & 0xff00) >> 8);
h2cParaLen = 3;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_PKT_CNT_L_PL_TYPE;
if (pTxRxPars->txrxPayloadType > MP_BT_PAYLOAD_MAX) {
RTW_INFO("[MPT], Error!! pTxRxPars->txrxPayloadType=0x%x, (should be between 0~4)\n", pTxRxPars->txrxPayloadType);
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
} else {
h2cParaBuf[0] = (u8)((pTxRxPars->txrxTxPktCnt & 0xff));
h2cParaBuf[1] = (u8)((pTxRxPars->txrxTxPktCnt & 0xff00) >> 8);
h2cParaBuf[2] = pTxRxPars->txrxPayloadType;
h2cParaLen = 3;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_PKT_CNT_H_PKT_INTV;
if (pTxRxPars->txrxTxPktInterval > 15) {
RTW_INFO("[MPT], Error!! pTxRxPars->txrxTxPktInterval=0x%x, (should be between 0~15)\n", pTxRxPars->txrxTxPktInterval);
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
} else {
h2cParaBuf[0] = (u8)((pTxRxPars->txrxTxPktCnt & 0xff0000) >> 16);
h2cParaBuf[1] = (u8)((pTxRxPars->txrxTxPktCnt & 0xff000000) >> 24);
h2cParaBuf[2] = pTxRxPars->txrxTxPktInterval;
h2cParaLen = 3;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_WHITENCOEFF;
{
h2cParaBuf[0] = pTxRxPars->txrxWhitenCoeff;
h2cParaLen = 1;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_CHNL_TX_GAIN;
if ((pTxRxPars->txrxChannel > 78) ||
(pTxRxPars->txrxTxGainIndex > 7)) {
RTW_INFO("[MPT], Error!! pTxRxPars->txrxChannel=0x%x, (should be between 0~78)\n", pTxRxPars->txrxChannel);
RTW_INFO("[MPT], Error!! pTxRxPars->txrxTxGainIndex=0x%x, (should be between 0~7)\n", pTxRxPars->txrxTxGainIndex);
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
} else {
h2cParaBuf[0] = pTxRxPars->txrxChannel;
h2cParaBuf[1] = pTxRxPars->txrxTxGainIndex;
h2cParaLen = 2;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
/* fill h2c parameters */
btOpcode = BT_LO_OP_SET_BD_ADDR_L;
if ((pTxRxPars->txrxBdaddr[0] == 0) &&
(pTxRxPars->txrxBdaddr[1] == 0) &&
(pTxRxPars->txrxBdaddr[2] == 0) &&
(pTxRxPars->txrxBdaddr[3] == 0) &&
(pTxRxPars->txrxBdaddr[4] == 0) &&
(pTxRxPars->txrxBdaddr[5] == 0)) {
RTW_INFO("[MPT], Error!! pTxRxPars->txrxBdaddr=all zero\n");
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
if ((pTxRxPars->txrxBdaddr[0] == 0xff) &&
(pTxRxPars->txrxBdaddr[1] == 0xff) &&
(pTxRxPars->txrxBdaddr[2] == 0xff) &&
(pTxRxPars->txrxBdaddr[3] == 0xff) &&
(pTxRxPars->txrxBdaddr[4] == 0xff) &&
(pTxRxPars->txrxBdaddr[5] == 0xff)) {
RTW_INFO("[MPT], Error!! pTxRxPars->txrxBdaddr=all 0xf\n");
pBtRsp->status = (btOpcode << 8) | BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
}
{
h2cParaBuf[0] = pTxRxPars->txrxBdaddr[0];
h2cParaBuf[1] = pTxRxPars->txrxBdaddr[1];
h2cParaBuf[2] = pTxRxPars->txrxBdaddr[2];
h2cParaLen = 3;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
btOpcode = BT_LO_OP_SET_BD_ADDR_H;
{
h2cParaBuf[0] = pTxRxPars->txrxBdaddr[3];
h2cParaBuf[1] = pTxRxPars->txrxBdaddr[4];
h2cParaBuf[2] = pTxRxPars->txrxBdaddr[5];
h2cParaLen = 3;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* ckeck bt return status. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->status = BT_STATUS_SUCCESS;
return paraLen;
}
u16
mptbt_BtTestCtrl(
PADAPTER Adapter,
PBT_REQ_CMD pBtReq,
PBT_RSP_CMD pBtRsp
)
{
u8 h2cParaBuf[6] = {0};
u8 h2cParaLen = 0;
u16 paraLen = 0;
u8 retStatus = BT_STATUS_BT_OP_SUCCESS;
u8 btOpcode;
u8 btOpcodeVer = 0;
u8 testCtrl = 0;
/* */
/* check upper layer parameters */
/* */
/* 1. check upper layer opcode version */
if (pBtReq->opCodeVer != 1) {
RTW_INFO("[MPT], Error!! Upper OP code version not match!!!\n");
pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
return paraLen;
}
/* 2. check upper layer parameter length */
if (1 == pBtReq->paraLength) {
testCtrl = pBtReq->pParamStart[0];
RTW_INFO("[MPT], testCtrl=%d\n", testCtrl);
} else {
RTW_INFO("[MPT], Error!! wrong parameter length=%d (should be 1)\n", pBtReq->paraLength);
pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
return paraLen;
}
/* */
/* execute lower layer opcodes */
/* */
/* 1. fill h2c parameters */
/* check bt mode */
btOpcode = BT_LO_OP_TEST_CTRL;
if (testCtrl >= MP_BT_TEST_MAX) {
RTW_INFO("[MPT], Error!! testCtrl=0x%x, (should be between smaller or equal to 0x%x)\n",
testCtrl, MP_BT_TEST_MAX - 1);
pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
return paraLen;
} else {
h2cParaBuf[0] = testCtrl;
h2cParaLen = 1;
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
}
/* 3. construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->status = BT_STATUS_SUCCESS;
return paraLen;
}
u16
mptbt_TestBT(
PADAPTER Adapter,
PBT_REQ_CMD pBtReq,
PBT_RSP_CMD pBtRsp
)
{
u8 h2cParaBuf[6] = {0};
u8 h2cParaLen = 0;
u16 paraLen = 0;
u8 retStatus = BT_STATUS_BT_OP_SUCCESS;
u8 btOpcode;
u8 btOpcodeVer = 0;
u8 testCtrl = 0;
/* 1. fill h2c parameters */
btOpcode = 0x11;
h2cParaBuf[0] = 0x11;
h2cParaBuf[1] = 0x0;
h2cParaBuf[2] = 0x0;
h2cParaBuf[3] = 0x0;
h2cParaBuf[4] = 0x0;
h2cParaLen = 1;
/* retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); */
retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, h2cParaBuf, h2cParaLen);
/* 3. construct respond status code and data. */
if (BT_STATUS_BT_OP_SUCCESS != retStatus) {
pBtRsp->status = ((btOpcode << 8) | retStatus);
RTW_INFO("[MPT], Error!! status code=0x%x\n", pBtRsp->status);
return paraLen;
}
pBtRsp->status = BT_STATUS_SUCCESS;
return paraLen;
}
void
mptbt_BtControlProcess(
PADAPTER Adapter,
void *pInBuf
)
{
u8 H2C_Parameter[6] = {0};
PBT_H2C pH2c = (PBT_H2C)&H2C_Parameter[0];
PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.mpt_ctx);
PBT_REQ_CMD pBtReq = (PBT_REQ_CMD)pInBuf;
PBT_RSP_CMD pBtRsp;
u8 i;
RTW_INFO("[MPT], mptbt_BtControlProcess()=========>\n");
RTW_INFO("[MPT], input opCodeVer=%d\n", pBtReq->opCodeVer);
RTW_INFO("[MPT], input OpCode=%d\n", pBtReq->OpCode);
RTW_INFO("[MPT], paraLength=%d\n", pBtReq->paraLength);
if (pBtReq->paraLength) {
/* RTW_INFO("[MPT], parameters(hex):0x%x %d\n",&pBtReq->pParamStart[0], pBtReq->paraLength); */
}
_rtw_memset((void *)pMptCtx->mptOutBuf, 0, 100);
pMptCtx->mptOutLen = 4; /* length of (BT_RSP_CMD.status+BT_RSP_CMD.paraLength) */
pBtRsp = (PBT_RSP_CMD)pMptCtx->mptOutBuf;
pBtRsp->status = BT_STATUS_SUCCESS;
pBtRsp->paraLength = 0x0;
/* The following we should maintain the User OP codes sent by upper layer */
switch (pBtReq->OpCode) {
case BT_UP_OP_BT_READY:
RTW_INFO("[MPT], OPcode : [BT_READY]\n");
pBtRsp->paraLength = mptbt_BtReady(Adapter, pBtReq, pBtRsp);
break;
case BT_UP_OP_BT_SET_MODE:
RTW_INFO("[MPT], OPcode : [BT_SET_MODE]\n");
pBtRsp->paraLength = mptbt_BtSetMode(Adapter, pBtReq, pBtRsp);
break;
case BT_UP_OP_BT_SET_TX_RX_PARAMETER:
RTW_INFO("[MPT], OPcode : [BT_SET_TXRX_PARAMETER]\n");
pBtRsp->paraLength = mptbt_BtSetTxRxPars(Adapter, pBtReq, pBtRsp);
break;
case BT_UP_OP_BT_SET_GENERAL:
RTW_INFO("[MPT], OPcode : [BT_SET_GENERAL]\n");
pBtRsp->paraLength = mptbt_BtSetGeneral(Adapter, pBtReq, pBtRsp);
break;
case BT_UP_OP_BT_GET_GENERAL:
RTW_INFO("[MPT], OPcode : [BT_GET_GENERAL]\n");
pBtRsp->paraLength = mptbt_BtGetGeneral(Adapter, pBtReq, pBtRsp);
break;
case BT_UP_OP_BT_TEST_CTRL:
RTW_INFO("[MPT], OPcode : [BT_TEST_CTRL]\n");
pBtRsp->paraLength = mptbt_BtTestCtrl(Adapter, pBtReq, pBtRsp);
break;
case BT_UP_OP_TEST_BT:
RTW_INFO("[MPT], OPcode : [TEST_BT]\n");
pBtRsp->paraLength = mptbt_TestBT(Adapter, pBtReq, pBtRsp);
break;
default:
RTW_INFO("[MPT], Error!! OPcode : UNDEFINED!!!!\n");
pBtRsp->status = BT_STATUS_UNKNOWN_OPCODE_U;
pBtRsp->paraLength = 0x0;
break;
}
pMptCtx->mptOutLen += pBtRsp->paraLength;
RTW_INFO("[MPT], pMptCtx->mptOutLen=%d, pBtRsp->paraLength=%d\n", pMptCtx->mptOutLen, pBtRsp->paraLength);
RTW_INFO("[MPT], mptbt_BtControlProcess()<=========\n");
}
#endif
View Git Blame Copy Permalink