mirrors/8821cu-20210916
1
0
Fork 0
mirror of https://github.com/morrownr/8821cu-20210916.git synced 2024-11-25 14:54:31 +00:00
Code Releases Activity
dff921fddc
8821cu-20210916/include/hal_data.h
morrownr 1d6ef930b9 initial commit
2022-11-17 08:26:57 -06:00

882 lines
23 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#ifndef __HAL_DATA_H__
#define __HAL_DATA_H__
#if 1/* def CONFIG_SINGLE_IMG */
#include "../hal/phydm/phydm_precomp.h"
#ifdef CONFIG_BT_COEXIST
#include <hal_btcoex.h>
#endif
#include <hal_btcoex_wifionly.h>
#ifdef CONFIG_SDIO_HCI
#include <hal_sdio.h>
#endif
#ifdef CONFIG_GSPI_HCI
#include <hal_gspi.h>
#endif
#if defined(CONFIG_RTW_ACS) || defined(CONFIG_BACKGROUND_NOISE_MONITOR)
#include "../hal/hal_dm_acs.h"
#endif
/*
* <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06.
* */
typedef enum _RT_MULTI_FUNC {
RT_MULTI_FUNC_NONE = 0x00,
RT_MULTI_FUNC_WIFI = 0x01,
RT_MULTI_FUNC_BT = 0x02,
RT_MULTI_FUNC_GPS = 0x04,
} RT_MULTI_FUNC, *PRT_MULTI_FUNC;
/*
* <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08.
* */
typedef enum _RT_POLARITY_CTL {
RT_POLARITY_LOW_ACT = 0,
RT_POLARITY_HIGH_ACT = 1,
} RT_POLARITY_CTL, *PRT_POLARITY_CTL;
/* For RTL8723 regulator mode. by tynli. 2011.01.14. */
typedef enum _RT_REGULATOR_MODE {
RT_SWITCHING_REGULATOR = 0,
RT_LDO_REGULATOR = 1,
} RT_REGULATOR_MODE, *PRT_REGULATOR_MODE;
/*
* Interface type.
* */
typedef enum _INTERFACE_SELECT_PCIE {
INTF_SEL0_SOLO_MINICARD = 0, /* WiFi solo-mCard */
INTF_SEL1_BT_COMBO_MINICARD = 1, /* WiFi+BT combo-mCard */
INTF_SEL2_PCIe = 2, /* PCIe Card */
} INTERFACE_SELECT_PCIE, *PINTERFACE_SELECT_PCIE;
typedef enum _INTERFACE_SELECT_USB {
INTF_SEL0_USB = 0, /* USB */
INTF_SEL1_USB_High_Power = 1, /* USB with high power PA */
INTF_SEL2_MINICARD = 2, /* Minicard */
INTF_SEL3_USB_Solo = 3, /* USB solo-Slim module */
INTF_SEL4_USB_Combo = 4, /* USB Combo-Slim module */
INTF_SEL5_USB_Combo_MF = 5, /* USB WiFi+BT Multi-Function Combo, i.e., Proprietary layout(AS-VAU) which is the same as SDIO card */
} INTERFACE_SELECT_USB, *PINTERFACE_SELECT_USB;
typedef enum _RT_AMPDU_BRUST_MODE {
RT_AMPDU_BRUST_NONE = 0,
RT_AMPDU_BRUST_92D = 1,
RT_AMPDU_BRUST_88E = 2,
RT_AMPDU_BRUST_8812_4 = 3,
RT_AMPDU_BRUST_8812_8 = 4,
RT_AMPDU_BRUST_8812_12 = 5,
RT_AMPDU_BRUST_8812_15 = 6,
RT_AMPDU_BRUST_8723B = 7,
} RT_AMPDU_BRUST, *PRT_AMPDU_BRUST_MODE;
/* Tx Power Limit Table Size */
#define MAX_REGULATION_NUM 4
#define MAX_RF_PATH_NUM_IN_POWER_LIMIT_TABLE 4
#define MAX_2_4G_BANDWIDTH_NUM 2
#define MAX_RATE_SECTION_NUM 10
#define MAX_5G_BANDWIDTH_NUM 4
#define NUM_OF_TARGET_TXPWR_2G 10 /* CCK:1, OFDM:1, HT:4, VHT:4 */
#define NUM_OF_TARGET_TXPWR_5G 9 /* OFDM:1, HT:4, VHT:4 */
#ifdef RTW_RX_AGGREGATION
typedef enum _RX_AGG_MODE {
RX_AGG_DISABLE,
RX_AGG_DMA,
RX_AGG_USB,
RX_AGG_MIX
} RX_AGG_MODE;
/* #define MAX_RX_DMA_BUFFER_SIZE 10240 */ /* 10K for 8192C RX DMA buffer */
#endif /* RTW_RX_AGGREGATION */
/* E-Fuse */
#ifdef CONFIG_RTL8188E
#define EFUSE_MAP_SIZE 512
#endif
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8192E
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8723B
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8814A
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8703B
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8723D
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8188F
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8188GTV
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8710B
#define EFUSE_MAP_SIZE 512
#endif
#ifdef CONFIG_RTL8192F
#define EFUSE_MAP_SIZE 512
#endif
#if defined(CONFIG_RTL8814A) || defined(CONFIG_RTL8822B) || defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8814B)
#define EFUSE_MAX_SIZE 1024
#elif defined(CONFIG_RTL8188E) || defined(CONFIG_RTL8188F) || defined(CONFIG_RTL8188GTV) || defined(CONFIG_RTL8703B) || defined(CONFIG_RTL8710B)
#define EFUSE_MAX_SIZE 256
#else
#define EFUSE_MAX_SIZE 512
#endif
/* end of E-Fuse */
#define Mac_OFDM_OK 0x00000000
#define Mac_OFDM_Fail 0x10000000
#define Mac_OFDM_FasleAlarm 0x20000000
#define Mac_CCK_OK 0x30000000
#define Mac_CCK_Fail 0x40000000
#define Mac_CCK_FasleAlarm 0x50000000
#define Mac_HT_OK 0x60000000
#define Mac_HT_Fail 0x70000000
#define Mac_HT_FasleAlarm 0x90000000
#define Mac_DropPacket 0xA0000000
#ifdef CONFIG_RF_POWER_TRIM
#if defined(CONFIG_RTL8723B)
#define REG_RF_BB_GAIN_OFFSET 0x7f
#define RF_GAIN_OFFSET_MASK 0xfffff
#elif defined(CONFIG_RTL8188E)
#define REG_RF_BB_GAIN_OFFSET 0x55
#define RF_GAIN_OFFSET_MASK 0xfffff
#else
#define REG_RF_BB_GAIN_OFFSET 0x55
#define RF_GAIN_OFFSET_MASK 0xfffff
#endif /* CONFIG_RTL8723B */
#endif /*CONFIG_RF_POWER_TRIM*/
/* For store initial value of BB register */
typedef struct _BB_INIT_REGISTER {
u16 offset;
u32 value;
} BB_INIT_REGISTER, *PBB_INIT_REGISTER;
#define PAGE_SIZE_128 128
#define PAGE_SIZE_256 256
#define PAGE_SIZE_512 512
#define HCI_SUS_ENTER 0
#define HCI_SUS_LEAVING 1
#define HCI_SUS_LEAVE 2
#define HCI_SUS_ENTERING 3
#define HCI_SUS_ERR 4
#define EFUSE_FILE_UNUSED 0
#define EFUSE_FILE_FAILED 1
#define EFUSE_FILE_LOADED 2
#define MACADDR_FILE_UNUSED 0
#define MACADDR_FILE_FAILED 1
#define MACADDR_FILE_LOADED 2
#define MAX_IQK_INFO_BACKUP_CHNL_NUM 5
#define MAX_IQK_INFO_BACKUP_REG_NUM 10
struct kfree_data_t {
u8 flag;
s8 bb_gain[BB_GAIN_NUM][RF_PATH_MAX];
#if CONFIG_IEEE80211_BAND_5GHZ
s8 pa_bias_5g[RF_PATH_MAX];
s8 pad_bias_5g[RF_PATH_MAX];
#endif
s8 thermal;
};
bool kfree_data_is_bb_gain_empty(struct kfree_data_t *data);
struct hal_spec_t {
char *ic_name;
u8 macid_num;
u8 sec_cam_ent_num;
u8 sec_cap;
u8 wow_cap;
u8 macid_cap;
u16 macid_txrpt;
u8 macid_txrpt_pgsz;
u8 rfpath_num_2g:4; /* used for tx power index path */
u8 rfpath_num_5g:4; /* used for tx power index path */
u8 rf_reg_path_num;
u8 rf_reg_path_avail_num;
u8 rf_reg_trx_path_bmp; /* [7:4]TX path bmp, [0:3]RX path bmp */
u8 max_tx_cnt;
u8 tx_nss_num:4;
u8 rx_nss_num:4;
u8 band_cap; /* value of BAND_CAP_XXX */
u8 bw_cap; /* value of BW_CAP_XXX */
u8 port_num;
u8 proto_cap; /* value of PROTO_CAP_XXX */
u8 txgi_max; /* maximum tx power gain index */
u8 txgi_pdbm; /* tx power gain index per dBm */
u8 wl_func; /* value of WL_FUNC_XXX */
u8 tx_aclt_unit_factor; /* how many 32us */
u8 rx_tsf_filter:1;
u8 pg_txpwr_saddr; /* starting address of PG tx power info */
u8 pg_txgi_diff_factor; /* PG tx power gain index diff to tx power gain index */
u8 hci_type; /* value of HCI Type */
};
#define HAL_SPEC_CHK_RF_PATH_2G(_spec, _path) ((_spec)->rfpath_num_2g > (_path))
#define HAL_SPEC_CHK_RF_PATH_5G(_spec, _path) ((_spec)->rfpath_num_5g > (_path))
#define HAL_SPEC_CHK_RF_PATH(_spec, _band, _path) ( \
_band == BAND_ON_2_4G ? HAL_SPEC_CHK_RF_PATH_2G(_spec, _path) : \
_band == BAND_ON_5G ? HAL_SPEC_CHK_RF_PATH_5G(_spec, _path) : 0)
#ifdef CONFIG_PHY_CAPABILITY_QUERY
struct phy_spec_t {
u32 trx_cap;
u32 stbc_cap;
u32 ldpc_cap;
u32 txbf_param;
u32 txbf_cap;
};
#endif
struct hal_iqk_reg_backup {
u8 central_chnl;
u8 bw_mode;
u32 reg_backup[MAX_RF_PATH][MAX_IQK_INFO_BACKUP_REG_NUM];
};
typedef struct hal_p2p_ps_para {
/*DW0*/
u8 offload_en:1;
u8 role:1;
u8 ctwindow_en:1;
u8 noa_en:1;
u8 noa_sel:1;
u8 all_sta_sleep:1;
u8 discovery:1;
u8 disable_close_rf:1;
u8 p2p_port_id;
u8 p2p_group;
u8 p2p_macid;
/*DW1*/
u8 ctwindow_length;
u8 rsvd3;
u8 rsvd4;
u8 rsvd5;
/*DW2*/
u32 noa_duration_para;
/*DW3*/
u32 noa_interval_para;
/*DW4*/
u32 noa_start_time_para;
/*DW5*/
u32 noa_count_para;
} HAL_P2P_PS_PARA, *PHAL_P2P_PS_PARA;
#define TXPWR_LMT_RS_CCK 0
#define TXPWR_LMT_RS_OFDM 1
#define TXPWR_LMT_RS_HT 2
#define TXPWR_LMT_RS_VHT 3
#define TXPWR_LMT_RS_NUM 4
#define TXPWR_LMT_RS_NUM_2G 4 /* CCK, OFDM, HT, VHT */
#define TXPWR_LMT_RS_NUM_5G 3 /* OFDM, HT, VHT */
#if CONFIG_TXPWR_LIMIT
extern const char *const _txpwr_lmt_rs_str[];
#define txpwr_lmt_rs_str(rs) (((rs) >= TXPWR_LMT_RS_NUM) ? _txpwr_lmt_rs_str[TXPWR_LMT_RS_NUM] : _txpwr_lmt_rs_str[(rs)])
struct txpwr_lmt_ent {
_list list;
s8 lmt_2g[MAX_2_4G_BANDWIDTH_NUM]
[TXPWR_LMT_RS_NUM_2G]
[CENTER_CH_2G_NUM]
[MAX_TX_COUNT];
#if CONFIG_IEEE80211_BAND_5GHZ
s8 lmt_5g[MAX_5G_BANDWIDTH_NUM]
[TXPWR_LMT_RS_NUM_5G]
[CENTER_CH_5G_ALL_NUM]
[MAX_TX_COUNT];
#endif
char regd_name[0];
};
#endif /* CONFIG_TXPWR_LIMIT */
typedef struct hal_com_data {
HAL_VERSION version_id;
RT_MULTI_FUNC MultiFunc; /* For multi-function consideration. */
RT_POLARITY_CTL PolarityCtl; /* For Wifi PDn Polarity control. */
RT_REGULATOR_MODE RegulatorMode; /* switching regulator or LDO */
u8 hw_init_completed;
/****** FW related ******/
u32 firmware_size;
u16 firmware_version;
u16 FirmwareVersionRev;
u16 firmware_sub_version;
u16 FirmwareSignature;
u8 RegFWOffload;
u8 bFWReady;
u8 bBTFWReady;
u8 fw_ractrl;
u8 LastHMEBoxNum; /* H2C - for host message to fw */
#ifdef CONFIG_LPS_1T1R
u8 lps_1t1r;
#endif
/****** current WIFI_PHY values ******/
WIRELESS_MODE CurrentWirelessMode;
enum channel_width current_channel_bw;
BAND_TYPE current_band_type; /* 0:2.4G, 1:5G */
u8 current_channel;
u8 cch_20;
u8 cch_40;
u8 cch_80;
u8 CurrentCenterFrequencyIndex1;
u8 nCur40MhzPrimeSC; /* Control channel sub-carrier */
u8 nCur80MhzPrimeSC; /* used for primary 40MHz of 80MHz mode */
BOOLEAN bSwChnlAndSetBWInProgress;
u8 bDisableSWChannelPlan; /* flag of disable software change channel plan */
u16 BasicRateSet;
u32 ReceiveConfig;
#ifdef CONFIG_WIFI_MONITOR
struct mon_reg_backup mon_backup; /* used for switching back from monitor mode */
#endif /* CONFIG_WIFI_MONITOR */
u8 rx_tsf_addr_filter_config; /* for 8822B/8821C USE */
BOOLEAN bSwChnl;
BOOLEAN bSetChnlBW;
BOOLEAN bSWToBW40M;
BOOLEAN bSWToBW80M;
BOOLEAN bChnlBWInitialized;
#ifdef CONFIG_RTW_ACS
struct auto_chan_sel acs;
#endif
#ifdef CONFIG_BCN_RECOVERY
u8 issue_bcn_fail;
#endif /*CONFIG_BCN_RECOVERY*/
/****** rf_ctrl *****/
u8 rf_chip;
u8 trx_path_bmp; /* [7:4]TX path bmp, [0:3]RX path bmp */
u8 rf_type; /*enum rf_type , is RF_PATH - GET_HAL_RFPATH*/
u8 NumTotalRFPath; /*GET_HAL_RFPATH_NUM*/
u8 max_tx_cnt;
u8 tx_nss; /*tx Spatial Streams - GET_HAL_TX_NSS*/
u8 rx_nss; /*rx Spatial Streams - GET_HAL_RX_NSS*/
u8 txpath_cap_num_nss[4]; /* capable path num for NSS TX, [0] for 1SS, [3] for 4SS */
u8 PackageType;
u8 antenna_test;
/* runtime TRX path setting */
enum bb_path txpath; /* TX path bmp */
enum bb_path rxpath; /* RX path bmp */
enum bb_path txpath_nss[4]; /* path bmp for NSS TX, [0] for 1SS, [3] for 4SS */
u8 txpath_num_nss[4]; /* path num for NSS TX, [0] for 1SS, [3] for 4SS */
/****** Debug ******/
u16 ForcedDataRate; /* Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M. */
u8 bDumpRxPkt;
u8 bDumpTxPkt;
u8 dis_turboedca; /* 1: disable turboedca,
2: disable turboedca and setting EDCA parameter based on the input parameter*/
u32 edca_param_mode;
/****** EEPROM setting.******/
u8 bautoload_fail_flag;
u8 efuse_file_status;
u8 macaddr_file_status;
u8 EepromOrEfuse;
u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /*92C:256bytes, 88E:512bytes, we use union set (512bytes)*/
u8 InterfaceSel; /* board type kept in eFuse */
u16 CustomerID;
u16 EEPROMVID;
u16 EEPROMSVID;
#ifdef CONFIG_USB_HCI
u8 EEPROMUsbSwitch;
u16 EEPROMPID;
u16 EEPROMSDID;
#endif
#ifdef CONFIG_PCI_HCI
u16 EEPROMDID;
u16 EEPROMSMID;
#endif
u8 EEPROMCustomerID;
u8 EEPROMSubCustomerID;
u8 EEPROMVersion;
u8 EEPROMRegulatory;
u8 eeprom_thermal_meter;
u8 EEPROMBluetoothCoexist;
u8 EEPROMBluetoothType;
u8 EEPROMBluetoothAntNum;
u8 EEPROMBluetoothAntIsolation;
u8 EEPROMBluetoothRadioShared;
u8 EEPROMMACAddr[ETH_ALEN];
u8 eeprom_trx_path_bmp; /* [7:4]TX path bmp, [0:3]RX path bmp. 0x00:not specified */
u8 eeprom_max_tx_cnt; /* 0: not specified */
u8 tx_bbswing_24G;
u8 tx_bbswing_5G;
u8 efuse0x3d7; /* efuse[0x3D7] */
u8 efuse0x3d8; /* efuse[0x3D8] */
#ifdef CONFIG_RF_POWER_TRIM
u8 EEPROMRFGainOffset;
u8 EEPROMRFGainVal;
struct kfree_data_t kfree_data;
#endif /*CONFIG_RF_POWER_TRIM*/
#ifdef CONFIG_RTL8814A
u32 BackUp_BB_REG_4_2nd_CCA[3];
#endif
#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B) || \
defined(CONFIG_RTL8723D) || \
defined(CONFIG_RTL8192F)
u8 adjuseVoltageVal;
u8 need_restore;
#endif
u8 EfuseUsedPercentage;
u16 EfuseUsedBytes;
/*u8 EfuseMap[2][HWSET_MAX_SIZE_JAGUAR];*/
EFUSE_HAL EfuseHal;
u8 txpwr_pg_mode; /* enum txpwr_pg_mode */
/*---------------------------------------------------------------------------------*/
#ifdef CONFIG_TXPWR_PG_WITH_PWR_IDX
/* 2.4G TX power info for target TX power*/
u8 Index24G_CCK_Base[MAX_RF_PATH][CENTER_CH_2G_NUM];
u8 Index24G_BW40_Base[MAX_RF_PATH][CENTER_CH_2G_NUM];
s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
/* 5G TX power info for target TX power*/
#if CONFIG_IEEE80211_BAND_5GHZ
u8 Index5G_BW40_Base[MAX_RF_PATH][CENTER_CH_5G_ALL_NUM];
u8 Index5G_BW80_Base[MAX_RF_PATH][CENTER_CH_5G_80M_NUM];
s8 OFDM_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW80_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
#endif
#endif /* CONFIG_TXPWR_PG_WITH_PWR_IDX */
u8 txpwr_by_rate_undefined_band_path[TX_PWR_BY_RATE_NUM_BAND]
[TX_PWR_BY_RATE_NUM_RF];
s8 TxPwrByRate[TX_PWR_BY_RATE_NUM_BAND]
[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RATE];
/* Store the target power for each rate section and rf path */
u8 target_txpwr_2g[TX_PWR_BY_RATE_NUM_RF]
[NUM_OF_TARGET_TXPWR_2G];
u8 target_txpwr_5g[TX_PWR_BY_RATE_NUM_RF]
[NUM_OF_TARGET_TXPWR_5G];
bool set_entire_txpwr;
#if defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8822B) || defined(CONFIG_RTL8822C) || defined(CONFIG_RTL8814B) \
|| defined(CONFIG_RTL8723F)
u32 txagc_set_buf;
#endif
#ifdef CONFIG_FW_OFFLOAD_SET_TXPWR_IDX
u8 txpwr_idx_offload_buf[3]; /* for CCK, OFDM, HT1SS */
struct submit_ctx txpwr_idx_offload_sctx;
#endif
u8 txpwr_by_rate_loaded:1;
u8 txpwr_by_rate_from_file:1;
u8 txpwr_limit_loaded:1;
u8 txpwr_limit_from_file:1;
/* Read/write are allow for following hardware information variables */
u8 crystal_cap;
u8 PAType_2G;
u8 PAType_5G;
u8 LNAType_2G;
u8 LNAType_5G;
u8 ExternalPA_2G;
u8 ExternalLNA_2G;
u8 external_pa_5g;
u8 external_lna_5g;
u16 TypeGLNA;
u16 TypeGPA;
u16 TypeALNA;
u16 TypeAPA;
u16 rfe_type;
u8 bLedOpenDrain; /* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */
u32 ac_param_be; /* Original parameter for BE, use for EDCA turbo. */
u8 is_turbo_edca;
u8 prv_traffic_idx;
BB_REGISTER_DEFINITION_T PHYRegDef[MAX_RF_PATH]; /* Radio A/B/C/D */
u32 RfRegChnlVal[MAX_RF_PATH];
/* RDG enable */
BOOLEAN bRDGEnable;
#if defined (CONFIG_RTL8812A) || defined(CONFIG_RTL8821A)
u32 RegRRSR;
#endif
/****** antenna diversity ******/
u8 AntDivCfg;
u8 with_extenal_ant_switch;
u8 b_fix_tx_ant;
u8 AntDetection;
u8 TRxAntDivType;
u8 ant_path; /* for 8723B s0/s1 selection */
u32 antenna_tx_path; /* Antenna path Tx */
u32 AntennaRxPath; /* Antenna path Rx */
u8 sw_antdiv_bl_state;
/******** PHY DM & DM Section **********/
_lock IQKSpinLock;
u8 INIDATA_RATE[MACID_NUM_SW_LIMIT];
struct dm_struct odmpriv;
u64 bk_rf_ability;
u8 bIQKInitialized;
u8 bNeedIQK;
u8 neediqk_24g;
u8 IQK_MP_Switch;
u8 bScanInProcess;
u8 phydm_init_result; /*BB and RF para match or not*/
/******** PHY DM & DM Section **********/
/* 2010/08/09 MH Add CU power down mode. */
BOOLEAN pwrdown;
#ifdef CONFIG_P2P
#ifdef CONFIG_P2P_PS_NOA_USE_MACID_SLEEP
u16 p2p_ps_offload;
#else
u8 p2p_ps_offload;
#endif
#endif
/* Auto FSM to Turn On, include clock, isolation, power control for MAC only */
u8 bMacPwrCtrlOn;
u8 hci_sus_state;
u8 RegIQKFWOffload;
struct submit_ctx iqk_sctx;
u8 ch_switch_offload;
struct submit_ctx chsw_sctx;
RT_AMPDU_BRUST AMPDUBurstMode; /* 92C maybe not use, but for compile successfully */
u8 OutEpQueueSel;
u8 OutEpNumber;
#ifdef RTW_RX_AGGREGATION
RX_AGG_MODE rxagg_mode;
/* For RX Aggregation DMA Mode */
u8 rxagg_dma_size;
u8 rxagg_dma_timeout;
#endif /* RTW_RX_AGGREGATION */
bool intf_start;
#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
/* */
/* For SDIO Interface HAL related */
/* */
/* */
/* SDIO ISR Related */
/*
* u32 IntrMask[1];
* u32 IntrMaskToSet[1];
* LOG_INTERRUPT InterruptLog; */
u32 sdio_himr;
u32 sdio_hisr;
#ifndef RTW_HALMAC
/* */
/* SDIO Tx FIFO related. */
/* */
/* HIQ, MID, LOW, PUB free pages; padapter->xmitpriv.free_txpg */
#ifdef CONFIG_RTL8192F
u16 SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE];
#else
u8 SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE];
#endif/*CONFIG_RTL8192F*/
#ifdef CONFIG_SDIO_TX_ENABLE_AVAL_INT
u8 sdio_avail_int_en_q;
#endif
_lock SdioTxFIFOFreePageLock;
u8 SdioTxOQTMaxFreeSpace;
u8 SdioTxOQTFreeSpace;
#else /* RTW_HALMAC */
u16 SdioTxOQTFreeSpace;
#endif /* RTW_HALMAC */
/* */
/* SDIO Rx FIFO related. */
/* */
u8 SdioRxFIFOCnt;
#if defined (CONFIG_RTL8822C) || defined (CONFIG_RTL8192F)
u32 SdioRxFIFOSize;
#else
u16 SdioRxFIFOSize;
#endif
#ifndef RTW_HALMAC
u32 sdio_tx_max_len[SDIO_MAX_TX_QUEUE];/* H, N, L, used for sdio tx aggregation max length per queue */
#else
#ifdef CONFIG_RTL8821C
u16 tx_high_page;
u16 tx_low_page;
u16 tx_normal_page;
u16 tx_extra_page;
u16 tx_pub_page;
u8 max_oqt_size;
#ifdef XMIT_BUF_SIZE
u32 max_xmit_size_vovi;
u32 max_xmit_size_bebk;
#endif /*XMIT_BUF_SIZE*/
u16 max_xmit_page;
u16 max_xmit_page_vo;
u16 max_xmit_page_vi;
u16 max_xmit_page_be;
u16 max_xmit_page_bk;
#endif /*#ifdef CONFIG_RTL8821C*/
#endif /* !RTW_HALMAC */
#endif /* CONFIG_SDIO_HCI */
#ifdef CONFIG_USB_HCI
/* 2010/12/10 MH Add for USB aggreation mode dynamic shceme. */
BOOLEAN UsbRxHighSpeedMode;
BOOLEAN UsbTxVeryHighSpeedMode;
u32 UsbBulkOutSize;
BOOLEAN bSupportUSB3;
u8 usb_intf_start;
/* Interrupt relatd register information. */
u32 IntArray[3];/* HISR0,HISR1,HSISR */
u32 IntrMask[3];
#ifdef CONFIG_USB_TX_AGGREGATION
u8 UsbTxAggMode;
u8 UsbTxAggDescNum;
#endif /* CONFIG_USB_TX_AGGREGATION */
#ifdef CONFIG_USB_RX_AGGREGATION
u16 HwRxPageSize; /* Hardware setting */
/* For RX Aggregation USB Mode */
u8 rxagg_usb_size;
u8 rxagg_usb_timeout;
#endif/* CONFIG_USB_RX_AGGREGATION */
#endif /* CONFIG_USB_HCI */
#ifdef CONFIG_PCI_HCI
/* */
/* EEPROM setting. */
/* */
u32 TransmitConfig;
u32 IntrMaskToSet[2];
u32 IntArray[4];
u32 IntrMask[4];
u32 SysIntArray[1];
u32 SysIntrMask[1];
u32 IntrMaskReg[2];
u32 IntrMaskDefault[4];
u32 pci_backdoor_ctrl;
u8 bDefaultAntenna;
u8 bInterruptMigration;
u8 bDisableTxInt;
u16 RxTag;
#endif /* CONFIG_PCI_HCI */
#ifdef DBG_CONFIG_ERROR_DETECT
struct sreset_priv srestpriv;
#endif /* #ifdef DBG_CONFIG_ERROR_DETECT */
#ifdef CONFIG_BT_COEXIST
/* For bluetooth co-existance */
BT_COEXIST bt_coexist;
#endif /* CONFIG_BT_COEXIST */
#if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B) \
|| defined(CONFIG_RTL8188F) || defined(CONFIG_RTL8188GTV) || defined(CONFIG_RTL8723D)|| defined(CONFIG_RTL8192F)
#ifndef CONFIG_PCI_HCI /* mutual exclusive with PCI -- so they're SDIO and GSPI */
/* Interrupt relatd register information. */
u32 SysIntrStatus;
u32 SysIntrMask;
#endif
#endif /*endif CONFIG_RTL8723B */
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
char para_file_buf[MAX_PARA_FILE_BUF_LEN];
char *mac_reg;
u32 mac_reg_len;
char *bb_phy_reg;
u32 bb_phy_reg_len;
char *bb_agc_tab;
u32 bb_agc_tab_len;
char *bb_phy_reg_pg;
u32 bb_phy_reg_pg_len;
char *bb_phy_reg_mp;
u32 bb_phy_reg_mp_len;
char *rf_radio_a;
u32 rf_radio_a_len;
char *rf_radio_b;
u32 rf_radio_b_len;
char *rf_tx_pwr_track;
u32 rf_tx_pwr_track_len;
char *rf_tx_pwr_lmt;
u32 rf_tx_pwr_lmt_len;
#endif
#ifdef CONFIG_BACKGROUND_NOISE_MONITOR
struct noise_monitor nm;
#endif
struct hal_spec_t hal_spec;
#ifdef CONFIG_PHY_CAPABILITY_QUERY
struct phy_spec_t phy_spec;
#endif
u8 RfKFreeEnable;
u8 RfKFree_ch_group;
BOOLEAN bCCKinCH14;
BB_INIT_REGISTER RegForRecover[5];
#if defined(CONFIG_PCI_HCI) && defined(RTL8814AE_SW_BCN)
BOOLEAN bCorrectBCN;
#endif
#ifdef CONFIG_RTL8814A
u32 RxGainOffset[4]; /*{2G, 5G_Low, 5G_Middle, G_High}*/
u8 BackUp_IG_REG_4_Chnl_Section[4]; /*{A,B,C,D}*/
#endif
struct hal_iqk_reg_backup iqk_reg_backup[MAX_IQK_INFO_BACKUP_CHNL_NUM];
#ifdef RTW_HALMAC
u16 drv_rsvd_page_number;
#endif
#ifdef CONFIG_BEAMFORMING
u8 backup_snd_ptcl_ctrl;
#ifdef RTW_BEAMFORMING_VERSION_2
struct beamforming_info beamforming_info;
#endif /* RTW_BEAMFORMING_VERSION_2 */
#endif /* CONFIG_BEAMFORMING */
u8 not_xmitframe_fw_dl; /*not use xmitframe to download fw*/
u8 phydm_op_mode;
u8 in_cta_test;
#ifdef CONFIG_RTW_LED
struct led_priv led;
#endif
/* for multi channel case (ex: MCC/TDLS) */
u8 multi_ch_switch_mode;
#ifdef CONFIG_RTL8814B
u8 dma_ch_map[32]; /* TXDESC qsel maximum size */
#endif
} HAL_DATA_COMMON, *PHAL_DATA_COMMON;
typedef struct hal_com_data HAL_DATA_TYPE, *PHAL_DATA_TYPE;
#define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)(((struct _ADAPTER*)__pAdapter)->HalData))
#define GET_HAL_SPEC(__pAdapter) (&(GET_HAL_DATA((__pAdapter))->hal_spec))
#define adapter_to_led(adapter) (&(GET_HAL_DATA(adapter)->led))
#define RT_GetInterfaceSelection(_Adapter) (GET_HAL_DATA(_Adapter)->InterfaceSel)
#define GET_KFREE_DATA(_adapter) (&(GET_HAL_DATA((_adapter))->kfree_data))
#define SUPPORT_HW_RADIO_DETECT(Adapter) (RT_GetInterfaceSelection(Adapter) == INTF_SEL2_MINICARD || \
RT_GetInterfaceSelection(Adapter) == INTF_SEL3_USB_Solo || \
RT_GetInterfaceSelection(Adapter) == INTF_SEL4_USB_Combo)
#define get_hal_mac_addr(adapter) (GET_HAL_DATA(adapter)->EEPROMMACAddr)
#define is_boot_from_eeprom(adapter) (GET_HAL_DATA(adapter)->EepromOrEfuse)
#define rtw_get_hw_init_completed(adapter) (GET_HAL_DATA(adapter)->hw_init_completed)
#define rtw_set_hw_init_completed(adapter, cmp) (GET_HAL_DATA(adapter)->hw_init_completed = cmp)
#define rtw_is_hw_init_completed(adapter) (GET_HAL_DATA(adapter)->hw_init_completed == _TRUE)
/* refer to (hal_data->version_id.RFType / registrypriv->rf_path / 8814a from efuse or registrypriv)*/
#define GET_HAL_RFPATH(adapter) (GET_HAL_DATA(adapter)->rf_type)
#define GET_HAL_RFPATH_NUM(adapter) (GET_HAL_DATA(adapter)->NumTotalRFPath)
#define GET_HAL_TX_PATH_BMP(adapter) ((GET_HAL_DATA(adapter)->trx_path_bmp & 0xF0) >> 4)
#define GET_HAL_RX_PATH_BMP(adapter) (GET_HAL_DATA(adapter)->trx_path_bmp & 0x0F)
/* refer to (registrypriv-> tx_nss,rx_nss / hal_spec->tx_nss_num,rx_nss_num)*/
#define GET_HAL_TX_NSS(adapter) (GET_HAL_DATA(adapter)->tx_nss)
#define GET_HAL_RX_NSS(adapter) (GET_HAL_DATA(adapter)->rx_nss)
#endif
#ifdef RTW_HALMAC
int rtw_halmac_deinit_adapter(struct dvobj_priv *);
#endif /* RTW_HALMAC */
#endif /* __HAL_DATA_H__ */
View Git Blame Copy Permalink