1
0
mirror of https://github.com/morrownr/8821cu-20210916.git synced 2024-12-23 14:54:32 +00:00
8821cu-20210916/hal/halmac/halmac_pwr_seq_cmd.h
2022-11-17 08:26:57 -06:00

99 lines
2.7 KiB
C

/******************************************************************************
*
* Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
******************************************************************************/
#ifndef HALMAC_POWER_SEQUENCE_CMD
#define HALMAC_POWER_SEQUENCE_CMD
#include "halmac_2_platform.h"
#define HALMAC_PWR_POLLING_CNT 20000
/* The value of cmd : 4 bits */
/* offset : the read register offset
* msk : the mask of the read value
* value : N/A, left by 0
* Note : dirver shall implement this function by read & msk
*/
#define HALMAC_PWR_CMD_READ 0x00
/* offset: the read register offset
* msk: the mask of the write bits
* value: write value
* Note: driver shall implement this cmd by read & msk after write
*/
#define HALMAC_PWR_CMD_WRITE 0x01
/* offset: the read register offset
* msk: the mask of the polled value
* value: the value to be polled, masked by the msd field.
* Note: driver shall implement this cmd by
* do{
* if( (Read(offset) & msk) == (value & msk) )
* break;
* } while(not timeout);
*/
#define HALMAC_PWR_CMD_POLLING 0x02
/* offset: the value to delay
* msk: N/A
* value: the unit of delay, 0: us, 1: ms
*/
#define HALMAC_PWR_CMD_DELAY 0x03
/* offset: N/A
* msk: N/A
* value: N/A
*/
#define HALMAC_PWR_CMD_END 0x04
/* The value of base : 4 bits */
/* define the base address of each block */
#define HALMAC_PWR_ADDR_MAC 0x00
#define HALMAC_PWR_ADDR_USB 0x01
#define HALMAC_PWR_ADDR_PCIE 0x02
#define HALMAC_PWR_ADDR_SDIO 0x03
/* The value of interface_msk : 4 bits */
#define HALMAC_PWR_INTF_SDIO_MSK BIT(0)
#define HALMAC_PWR_INTF_USB_MSK BIT(1)
#define HALMAC_PWR_INTF_PCI_MSK BIT(2)
#define HALMAC_PWR_INTF_ALL_MSK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
/* The value of cut_msk : 8 bits */
#define HALMAC_PWR_CUT_TESTCHIP_MSK BIT(0)
#define HALMAC_PWR_CUT_A_MSK BIT(1)
#define HALMAC_PWR_CUT_B_MSK BIT(2)
#define HALMAC_PWR_CUT_C_MSK BIT(3)
#define HALMAC_PWR_CUT_D_MSK BIT(4)
#define HALMAC_PWR_CUT_E_MSK BIT(5)
#define HALMAC_PWR_CUT_F_MSK BIT(6)
#define HALMAC_PWR_CUT_G_MSK BIT(7)
#define HALMAC_PWR_CUT_ALL_MSK 0xFF
enum halmac_pwrseq_cmd_delay_unit {
HALMAC_PWR_DELAY_US,
HALMAC_PWR_DELAY_MS,
};
struct halmac_wlan_pwr_cfg {
u16 offset;
u8 cut_msk;
u8 interface_msk;
u8 base:4;
u8 cmd:4;
u8 msk;
u8 value;
};
#endif