1
0
mirror of https://github.com/morrownr/8821cu-20210916.git synced 2024-12-28 17:09:32 +00:00
8821cu-20210916/include/rtl8822c_hal.h
2022-12-09 11:08:52 +02:00

247 lines
9.1 KiB
C

/******************************************************************************
*
* Copyright(c) 2015 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#ifndef _RTL8822C_HAL_H_
#define _RTL8822C_HAL_H_
#include <osdep_service.h> /* BIT(x) */
#include <drv_types.h> /* PADAPTER */
#include "../hal/halmac/halmac_api.h" /* MAC REG definition */
#ifdef CONFIG_SUPPORT_TRX_SHARED
#define DEF_RECVBUF_SZ 24576 /* RX 24K */
#if (DFT_TRX_SHARE_MODE == 1)
#define RX_FIFO_EXPANDING 40960 /* RX= 24K+40K=64K , TX=256K-40K=216K */
#elif (DFT_TRX_SHARE_MODE == 2)
#define RX_FIFO_EXPANDING 65536 /* RX= 24K+40K+24=88K , TX=256K-40K-24K=192K */
#elif (DFT_TRX_SHARE_MODE ==3)
#define RX_FIFO_EXPANDING 106496 /* RX= 24K+40K+24+40K=128K , TX=256K-40K-24K-40K=152K */
#elif (DFT_TRX_SHARE_MODE ==4)
#define RX_FIFO_EXPANDING 131072 /* RX= 24K+40K+24+40K+24K=128K , TX=256K-40K-24K-40K-24K=128K */
#else
#define RX_FIFO_EXPANDING 0
#endif
#define MAX_RECVBUF_SZ (DEF_RECVBUF_SZ + RX_FIFO_EXPANDING)
#else /* !CONFIG_SUPPORT_TRX_SHARED */
#ifdef CONFIG_PCI_HCI
#define MAX_RECVBUF_SZ 12288 /* 12KB */
#else
#define MAX_RECVBUF_SZ 24576 /* 24KB, TX: 256KB */
#endif /* !CONFIG_PCI_HCI */
#endif /* !CONFIG_SUPPORT_TRX_SHARED */
/*
* MAC Register definition
*/
#define REG_AFE_XTAL_CTRL REG_AFE_CTRL1_8822C /* hal_com.c & phydm */
#define REG_LEDCFG0 REG_LED_CFG_8822C /* rtw_mp.c */
#define MSR (REG_CR_8822C + 2) /* rtw_mp.c & hal_com.c */
#define MSR1 REG_CR_EXT_8822C /* rtw_mp.c & hal_com.c */
#define REG_C2HEVT_MSG_NORMAL 0x1A0 /* hal_com.c */
#define REG_C2HEVT_CLEAR 0x1AF /* hal_com.c */
#define REG_BCN_CTRL_1 REG_BCN_CTRL_CLINT0_8822C /* hal_com.c */
#define REG_WOWLAN_WAKE_REASON 0x01C7 /* hal_com.c */
#define REG_GPIO_PIN_CTRL_2 REG_GPIO_EXT_CTRL_8822C /* hal_com.c */
/* RXERR_RPT, for rtw_mp.c */
#define RXERR_TYPE_OFDM_PPDU 0
#define RXERR_TYPE_OFDM_FALSE_ALARM 2
#define RXERR_TYPE_OFDM_MPDU_OK 0
#define RXERR_TYPE_OFDM_MPDU_FAIL 1
#define RXERR_TYPE_CCK_PPDU 3
#define RXERR_TYPE_CCK_FALSE_ALARM 5
#define RXERR_TYPE_CCK_MPDU_OK 3
#define RXERR_TYPE_CCK_MPDU_FAIL 4
#define RXERR_TYPE_HT_PPDU 8
#define RXERR_TYPE_HT_FALSE_ALARM 9
#define RXERR_TYPE_HT_MPDU_TOTAL 6
#define RXERR_TYPE_HT_MPDU_OK 6
#define RXERR_TYPE_HT_MPDU_FAIL 7
#define RXERR_TYPE_RX_FULL_DROP 10
#define RXERR_COUNTER_MASK BIT_MASK_RPT_COUNTER_8822C
#define RXERR_RPT_RST BIT_RXERR_RPT_RST_8822C
#define _RXERR_RPT_SEL(type) (BIT_RXERR_RPT_SEL_V1_3_0_8822C(type) \
| ((type & 0x10) ? BIT_RXERR_RPT_SEL_V1_4_8822C : 0))
/*
* BB Register definition
*/
#define rPMAC_Reset 0x100 /* hal_mp.c */
#define rFPGA0_RFMOD 0x800
#define rFPGA0_TxInfo 0x804
#define rOFDMCCKEN_Jaguar 0x808 /* hal_mp.c */
#define rFPGA0_TxGainStage 0x80C /* phydm only */
#define rFPGA0_XA_HSSIParameter1 0x820 /* hal_mp.c */
#define rFPGA0_XA_HSSIParameter2 0x824 /* hal_mp.c */
#define rFPGA0_XB_HSSIParameter1 0x828 /* hal_mp.c */
#define rFPGA0_XB_HSSIParameter2 0x82C /* hal_mp.c */
#define rTxAGC_B_Rate18_06 0x830
#define rTxAGC_B_Rate54_24 0x834
#define rTxAGC_B_CCK1_55_Mcs32 0x838
#define rCCAonSec_Jaguar 0x838 /* hal_mp.c */
#define rTxAGC_B_Mcs03_Mcs00 0x83C
#define rTxAGC_B_Mcs07_Mcs04 0x848
#define rTxAGC_B_Mcs11_Mcs08 0x84C
#define rFPGA0_XA_RFInterfaceOE 0x860
#define rFPGA0_XB_RFInterfaceOE 0x864
#define rTxAGC_B_Mcs15_Mcs12 0x868
#define rTxAGC_B_CCK11_A_CCK2_11 0x86C
#define rFPGA0_XAB_RFInterfaceSW 0x870
#define rFPGA0_XAB_RFParameter 0x878
#define rFPGA0_AnalogParameter4 0x88C /* hal_mp.c & phydm */
#define rFPGA0_XB_LSSIReadBack 0x8A4 /* phydm */
#define rHSSIRead_Jaguar 0x8B0 /* RF read addr (rtl8822c_phy.c) */
#define rC_TxScale_Jaguar2 0x181C /* Pah_C TX scaling factor (hal_mp.c) */
#define rC_IGI_Jaguar2 0x1850 /* Initial Gain for path-C (hal_mp.c) */
#define rFPGA1_TxInfo 0x90C /* hal_mp.c */
#define rSingleTone_ContTx_Jaguar 0x914 /* hal_mp.c */
/* TX BeamForming */
#define REG_BB_TX_PATH_SEL_1_8822C 0x93C /* rtl8822c_phy.c */
#define REG_BB_TX_PATH_SEL_2_8822C 0x940 /* rtl8822c_phy.c */
/* TX BeamForming */
#define REG_BB_TXBF_ANT_SET_BF1_8822C 0x19AC /* rtl8822c_phy.c */
#define REG_BB_TXBF_ANT_SET_BF0_8822C 0x19B4 /* rtl8822c_phy.c */
#define rCCK0_System 0xA00
#define rCCK0_AFESetting 0xA04
#define rCCK0_DSPParameter2 0xA1C
#define rCCK0_TxFilter1 0xA20
#define rCCK0_TxFilter2 0xA24
#define rCCK0_DebugPort 0xA28
#define rCCK0_FalseAlarmReport 0xA2C
#define rD_TxScale_Jaguar2 0x1A1C /* Path_D TX scaling factor (hal_mp.c) */
#define rD_IGI_Jaguar2 0x1A50 /* Initial Gain for path-D (hal_mp.c) */
#define rOFDM0_TRxPathEnable 0xC04
#define rOFDM0_TRMuxPar 0xC08
#define rA_TxScale_Jaguar 0xC1C /* Pah_A TX scaling factor (hal_mp.c) */
#define rOFDM0_RxDetector1 0xC30 /* rtw_mp.c */
#define rOFDM0_ECCAThreshold 0xC4C /* phydm only */
#define rOFDM0_XAAGCCore1 0xC50 /* phydm only */
#define rA_IGI_Jaguar 0xC50 /* Initial Gain for path-A (hal_mp.c) */
#define rOFDM0_XBAGCCore1 0xC58 /* phydm only */
#define rOFDM0_XATxIQImbalance 0xC80 /* phydm only */
#define rA_LSSIWrite_Jaguar 0xC90 /* RF write addr, LSSI Parameter (rtl8822b_phy.c) */
#define rOFDM1_LSTF 0xD00
#define rOFDM1_TRxPathEnable 0xD04 /* hal_mp.c */
#define rA_PIRead_Jaguar 0xD04 /* RF readback with PI (rtl8822c_phy.c) */
#define rA_SIRead_Jaguar 0xD08 /* RF readback with SI (rtl8822c_phy.c) */
#define rB_PIRead_Jaguar 0xD44 /* RF readback with PI (rtl8822c_phy.c) */
#define rB_SIRead_Jaguar 0xD48 /* RF readback with SI (rtl8822c_phy.c) */
#define rTxAGC_A_Rate18_06 0xE00
#define rTxAGC_A_Rate54_24 0xE04
#define rTxAGC_A_CCK1_Mcs32 0xE08
#define rTxAGC_A_Mcs03_Mcs00 0xE10
#define rTxAGC_A_Mcs07_Mcs04 0xE14
#define rTxAGC_A_Mcs11_Mcs08 0xE18
#define rTxAGC_A_Mcs15_Mcs12 0xE1C
#define rB_TxScale_Jaguar 0xE1C /* Path_B TX scaling factor (hal_mp.c) */
#define rB_IGI_Jaguar 0xE50 /* Initial Gain for path-B (hal_mp.c) */
#define rB_LSSIWrite_Jaguar 0xE90 /* RF write addr, LSSI Parameter (rtl8822b_phy.c) */
/* RFE */
#define rA_RFE_Pinmux_Jaguar 0xCB0 /* hal_mp.c */
#define rB_RFE_Pinmux_Jaguar 0xEB0 /* Path_B RFE control pinmux */
#define rA_RFE_Inv_Jaguar 0xCB4 /* Path_A RFE cotrol */
#define rB_RFE_Inv_Jaguar 0xEB4 /* Path_B RFE control */
#define rA_RFE_Jaguar 0xCB8 /* Path_A RFE cotrol */
#define rB_RFE_Jaguar 0xEB8 /* Path_B RFE control */
#define rA_RFE_Inverse_Jaguar 0xCBC /* Path_A RFE control inverse */
#define rB_RFE_Inverse_Jaguar 0xEBC /* Path_B RFE control inverse */
#define r_ANTSEL_SW_Jaguar 0x900 /* ANTSEL SW Control */
#define bMask_RFEInv_Jaguar 0x3FF00000
#define bMask_AntselPathFollow_Jaguar 0x00030000
#define rC_RFE_Pinmux_Jaguar 0x18B4 /* Path_C RFE cotrol pinmux*/
#define rD_RFE_Pinmux_Jaguar 0x1AB4 /* Path_D RFE cotrol pinmux*/
#define rA_RFE_Sel_Jaguar2 0x1990
/* Page1(0x100) */
#define bBBResetB 0x100
/* Page8(0x800) */
#define bCCKEn 0x1000000
#define bOFDMEn 0x2000000
/* Reg 0x80C rFPGA0_TxGainStage */
#define bXBTxAGC 0xF00
#define bXCTxAGC 0xF000
#define bXDTxAGC 0xF0000
/* PageA(0xA00) */
#define bCCKBBMode 0x3
#define bCCKScramble 0x8
#define bCCKTxRate 0x3000
/* General */
#define bMaskByte0 0xFF /* mp, rtw_odm.c & phydm */
#define bMaskByte1 0xFF00 /* hal_mp.c & phydm */
#define bMaskByte2 0xFF0000 /* hal_mp.c & phydm */
#define bMaskByte3 0xFF000000 /* hal_mp.c & phydm */
#define bMaskHWord 0xFFFF0000 /* hal_com.c, rtw_mp.c */
#define bMaskLWord 0x0000FFFF /* mp, hal_com.c & phydm */
#define bMaskDWord 0xFFFFFFFF /* mp, hal, rtw_odm.c & phydm */
#define bEnable 0x1 /* hal_mp.c, rtw_mp.c */
#define bDisable 0x0 /* rtw_mp.c */
#define MAX_STALL_TIME 50 /* unit: us, hal_com_phycfg.c */
#define Rx_Smooth_Factor 20 /* phydm only */
/*
* RF Register definition
*/
#define RF_AC 0x00
#define RF_AC_Jaguar 0x00 /* hal_mp.c */
#define RF_CHNLBW 0x18 /* rtl8822c_phy.c */
#define RF_ModeTableAddr 0x30 /* rtl8822c_phy.c */
#define RF_ModeTableData0 0x31 /* rtl8822c_phy.c */
#define RF_ModeTableData1 0x32 /* rtl8822c_phy.c */
#define RF_0x52 0x52
#define RF_WeLut_Jaguar 0xEF /* rtl8822c_phy.c */
/* rtw_lps_state_chk()@hal_com.c */
#define BIT_PWRBIT_OW_EN BIT_WMAC_TCRPWRMGT_HWDATA_EN_8822C
/* General Functions */
void rtl8822c_init_hal_spec(PADAPTER); /* hal/hal_com.c */
#ifdef CONFIG_MP_INCLUDED
/* MP Functions */
#include <rtw_mp.h> /* struct mp_priv */
void rtl8822c_prepare_mp_txdesc(PADAPTER, struct mp_priv *); /* rtw_mp.c */
void rtl8822c_mp_config_rfpath(PADAPTER); /* hal_mp.c */
#endif
void hw_var_set_dl_rsvd_page(PADAPTER adapter, u8 mstatus);
#ifdef CONFIG_USB_HCI
#include <rtl8822cu_hal.h>
#elif defined(CONFIG_SDIO_HCI)
#include <rtl8822cs_hal.h>
#elif defined(CONFIG_PCI_HCI)
#include <rtl8822ce_hal.h>
#endif
#endif /* _RTL8822C_HAL_H_ */