1
0
mirror of https://github.com/morrownr/8821cu-20210916.git synced 2024-12-23 06:42:50 +00:00
8821cu-20210916/hal/halmac/halmac_88xx/halmac_gpio_88xx.c
2022-11-17 08:26:57 -06:00

271 lines
6.9 KiB
C

/******************************************************************************
*
* Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
******************************************************************************/
#include "halmac_gpio_88xx.h"
#if HALMAC_88XX_SUPPORT
/**
* pinmux_wl_led_mode_88xx() -control wlan led gpio function
* @adapter : the adapter of halmac
* @mode : wlan led mode
* Author : Ivan Lin
* Return : enum halmac_ret_status
* More details of status code can be found in prototype document
*/
enum halmac_ret_status
pinmux_wl_led_mode_88xx(struct halmac_adapter *adapter,
enum halmac_wlled_mode mode)
{
u8 value8;
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
PLTFM_MSG_TRACE("[TRACE]%s ===>\n", __func__);
value8 = HALMAC_REG_R8(REG_LED_CFG + 2);
value8 &= ~(BIT(6));
value8 |= BIT(3);
value8 &= ~(BIT(0) | BIT(1) | BIT(2));
switch (mode) {
case HALMAC_WLLED_MODE_TRX:
value8 |= 2;
break;
case HALMAC_WLLED_MODE_TX:
value8 |= 4;
break;
case HALMAC_WLLED_MODE_RX:
value8 |= 6;
break;
case HALMAC_WLLED_MODE_SW_CTRL:
value8 |= 0;
break;
default:
return HALMAC_RET_SWITCH_CASE_ERROR;
}
HALMAC_REG_W8(REG_LED_CFG + 2, value8);
PLTFM_MSG_TRACE("[TRACE]%s <===\n", __func__);
return HALMAC_RET_SUCCESS;
}
/**
* pinmux_wl_led_sw_ctrl_88xx() -control wlan led on/off
* @adapter : the adapter of halmac
* @on : on(1), off(0)
* Author : Ivan Lin
* Return : enum halmac_ret_status
* More details of status code can be found in prototype document
*/
void
pinmux_wl_led_sw_ctrl_88xx(struct halmac_adapter *adapter, u8 on)
{
u8 value8;
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
value8 = HALMAC_REG_R8(REG_LED_CFG + 2);
value8 = (on == 0) ? value8 | BIT(3) : value8 & ~(BIT(3));
HALMAC_REG_W8(REG_LED_CFG + 2, value8);
}
/**
* pinmux_sdio_int_polarity_88xx() -control sdio int polarity
* @adapter : the adapter of halmac
* @low_active : low active(1), high active(0)
* Author : Ivan Lin
* Return : enum halmac_ret_status
* More details of status code can be found in prototype document
*/
void
pinmux_sdio_int_polarity_88xx(struct halmac_adapter *adapter, u8 low_active)
{
u8 value8;
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
value8 = HALMAC_REG_R8(REG_SYS_SDIO_CTRL + 2);
value8 = (low_active == 0) ? value8 | BIT(3) : value8 & ~(BIT(3));
HALMAC_REG_W8(REG_SYS_SDIO_CTRL + 2, value8);
}
/**
* pinmux_gpio_mode_88xx() -control gpio io mode
* @adapter : the adapter of halmac
* @gpio_id : gpio0~15(0~15)
* @output : output(1), input(0)
* Author : Ivan Lin
* Return : enum halmac_ret_status
* More details of status code can be found in prototype document
*/
enum halmac_ret_status
pinmux_gpio_mode_88xx(struct halmac_adapter *adapter, u8 gpio_id, u8 output)
{
u16 value16;
u8 in_out;
u32 offset;
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
if (gpio_id <= 7)
offset = REG_GPIO_PIN_CTRL + 2;
else if (gpio_id >= 8 && gpio_id <= 15)
offset = REG_GPIO_EXT_CTRL + 2;
else
return HALMAC_RET_WRONG_GPIO;
in_out = (output == 0) ? 0 : 1;
gpio_id &= (8 - 1);
value16 = HALMAC_REG_R16(offset);
value16 &= ~((1 << gpio_id) | (1 << gpio_id << 8));
value16 |= (in_out << gpio_id);
HALMAC_REG_W16(offset, value16);
return HALMAC_RET_SUCCESS;
}
/**
* pinmux_gpio_output_88xx() -control gpio output high/low
* @adapter : the adapter of halmac
* @gpio_id : gpio0~15(0~15)
* @high : high(1), low(0)
* Author : Ivan Lin
* Return : enum halmac_ret_status
* More details of status code can be found in prototype document
*/
enum halmac_ret_status
pinmux_gpio_output_88xx(struct halmac_adapter *adapter, u8 gpio_id, u8 high)
{
u8 value8;
u8 hi_low;
u32 offset;
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
if (gpio_id <= 7)
offset = REG_GPIO_PIN_CTRL + 1;
else if (gpio_id >= 8 && gpio_id <= 15)
offset = REG_GPIO_EXT_CTRL + 1;
else
return HALMAC_RET_WRONG_GPIO;
hi_low = (high == 0) ? 0 : 1;
gpio_id &= (8 - 1);
value8 = HALMAC_REG_R8(offset);
value8 &= ~(1 << gpio_id);
value8 |= (hi_low << gpio_id);
HALMAC_REG_W8(offset, value8);
return HALMAC_RET_SUCCESS;
}
/**
* halmac_pinmux_status_88xx() -get current gpio status(high/low)
* @adapter : the adapter of halmac
* @pin_id : 0~15(0~15)
* @phigh : high(1), low(0)
* Author : Ivan Lin
* Return : enum halmac_ret_status
* More details of status code can be found in prototype document
*/
enum halmac_ret_status
pinmux_pin_status_88xx(struct halmac_adapter *adapter, u8 pin_id, u8 *high)
{
u8 value8;
u32 offset;
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
if (pin_id <= 7)
offset = REG_GPIO_PIN_CTRL;
else if (pin_id >= 8 && pin_id <= 15)
offset = REG_GPIO_EXT_CTRL;
else
return HALMAC_RET_WRONG_GPIO;
pin_id &= (8 - 1);
value8 = HALMAC_REG_R8(offset);
*high = (value8 & (1 << pin_id)) >> pin_id;
return HALMAC_RET_SUCCESS;
}
enum halmac_ret_status
pinmux_parser_88xx(struct halmac_adapter *adapter,
const struct halmac_gpio_pimux_list *list, u32 size,
u32 gpio_id, u32 *cur_func)
{
u32 i;
u8 value8;
const struct halmac_gpio_pimux_list *cur_list = list;
enum halmac_gpio_cfg_state *state;
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
state = &adapter->halmac_state.gpio_cfg_state;
if (*state == HALMAC_GPIO_CFG_STATE_BUSY)
return HALMAC_RET_BUSY_STATE;
*state = HALMAC_GPIO_CFG_STATE_BUSY;
for (i = 0; i < size; i++) {
if (gpio_id != cur_list->id) {
PLTFM_MSG_ERR("[ERR]offset:%X, value:%X, func:%X\n",
cur_list->offset, cur_list->value,
cur_list->func);
PLTFM_MSG_ERR("[ERR]id1 : %X, id2 : %X\n",
gpio_id, cur_list->id);
*state = HALMAC_GPIO_CFG_STATE_IDLE;
return HALMAC_RET_GET_PINMUX_ERR;
}
value8 = HALMAC_REG_R8(cur_list->offset);
value8 &= cur_list->msk;
if (value8 == cur_list->value) {
*cur_func = cur_list->func;
break;
}
cur_list++;
}
switch (*cur_func) {
case HALMAC_BT_DPDT_SEL:
*cur_func = (HALMAC_REG_R8(REG_LED_CFG + 3) & BIT(0)) ?
HALMAC_WL_DPDT_SEL : HALMAC_BT_DPDT_SEL;
break;
case HALMAC_BT_PAPE_SEL:
*cur_func = (HALMAC_REG_R8(REG_PAD_CTRL1 + 3) & BIT(5)) ?
HALMAC_WL_PAPE_SEL : HALMAC_BT_PAPE_SEL;
break;
case HALMAC_BT_LNAON_SEL:
*cur_func = (HALMAC_REG_R8(REG_PAD_CTRL1 + 3) & BIT(4)) ?
HALMAC_WL_LNAON_SEL : HALMAC_BT_LNAON_SEL;
break;
default:
break;
}
*state = HALMAC_GPIO_CFG_STATE_IDLE;
if (i == size)
return HALMAC_RET_GET_PINMUX_ERR;
return HALMAC_RET_SUCCESS;
}
#endif /* HALMAC_88XX_SUPPORT */