mirrors/8821cu-20210916
1
0
Fork 0
mirror of https://github.com/morrownr/8821cu-20210916.git synced 2024-11-18 19:44:48 +00:00
Code Releases Activity

Formatting

Browse Source
This commit is contained in:
mendel5 2023-01-19 22:59:35 +01:00 committed by GitHub
parent 54d5c2c040
commit b927c656c1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 11 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
README.md
View File

@ -152,7 +152,7 @@ or if you have previously installed another driver for chipsets supported by
this driver, you MUST remove anything that the previous attempt
installed BEFORE attempting to install this driver. This driver can be
removed with the script called `./remove-driver.sh`. Information is
available in the section called `Removal of the Driver.` You can get a
available in the section called `Removal of the Driver`. You can get a
good idea as to whether you need to remove a previously installed
driver by running the following command:
@ -372,7 +372,7 @@ git clone https://github.com/morrownr/8821cu-20210916.git
cd ~/src/8821cu-20210916
```
#### Step 8: Run the installation script ( install-driver.sh )
#### Step 8: Run the installation script (`install-driver.sh`)
Note: For automated builds (non-interactive), use _NoPrompt_ as an option.
@ -387,7 +387,9 @@ not be applied. Rebooting is strongly recommended.
Note: Fedora users that have secure boot turned on should run the following to
enroll the key:
```
$ sudo mokutil --import /var/lib/dkms/mok.pub
```
Manual build instructions: The above script automates the installation
process, however, if you want to or need to do a command line
@ -405,7 +407,7 @@ the process each time a new kernel is installed in your distro.
-----
### Driver Options ( edit-options.sh )
### Driver Options (`edit-options.sh`)
A file called `8821cu.conf` will be installed in `/etc/modprobe.d` by
default if you use the `./install-driver.sh` script.
@ -460,7 +462,7 @@ sudo ./install-driver.sh
```
-----
### Removal of the Driver ( remove-driver.sh )
### Removal of the Driver (`remove-driver.sh`)
Note: Removing the driver is advised in the following situations:
@ -507,7 +509,7 @@ Note: These are general recommendations, some of which may not apply to your spe
- Best location for the WiFi router/access point: Near center of apartment or house, at least a couple of feet away from walls, in an elevated location. You may have to test to see what the best location is in your environment.
- Check congestion: There are apps available for smart phones that allow you to get an idea of the congestion levels on WiFi channels. The apps generally go by the name of ```WiFi Analyzer``` or something similar.
- Check congestion: There are apps available for smart phones that allow you to get an idea of the congestion levels on WiFi channels. The apps generally go by the name of `WiFi Analyzer` or something similar.
After making and saving changes, reboot the router.
@ -533,7 +535,7 @@ After making and saving changes, reboot the router.
### How to disable onboard WiFi on Raspberry Pi 3B, 3B+, 3A+, 4B and Zero W
Add the following line to /boot/config.txt
Add the following line to `/boot/config.txt`
```
dtoverlay=disable-wifi
@ -543,15 +545,15 @@ dtoverlay=disable-wifi
### How to forget a saved WiFi network on a Raspberry Pi
#### Step 1: Edit wpa_supplicant.conf
#### Step 1: Edit `wpa_supplicant.conf`
```
sudo ${EDITOR} /etc/wpa_supplicant/wpa_supplicant.conf
```
#### Step 2: Delete the relevant WiFi network block (including the 'network=' and opening/closing braces.
#### Step 2: Delete the relevant WiFi network block (including the '`network=`' and opening/closing braces).
#### Step 3: Press ctrl-x followed by 'y' and enter to save the file.
#### Step 3: Press ctrl-x followed by '`y`' and enter to save the file.
#### Step 4: Reboot