2022-11-17 14:26:57 +00:00
/******************************************************************************
*
* Copyright ( c ) 2007 - 2017 Realtek Corporation .
*
* This program is free software ; you can redistribute it and / or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation .
*
* This program is distributed in the hope that it will be useful , but WITHOUT
* ANY WARRANTY ; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE . See the GNU General Public License for
* more details .
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*#define CONFIG_DISABLE_ODM*/
/*#define CONFIG_NO_FW*/
/*
* Public General Config
*/
# define AUTOCONF_INCLUDED
# define RTL871X_MODULE_NAME "8821CU"
# define DRV_NAME "rtl8821cu"
2022-12-05 06:02:20 +00:00
# define CONFIG_REGD_SRC_FROM_OS
2022-11-17 14:26:57 +00:00
/* Set CONFIG_RTL8821C from Makefile */
# ifndef CONFIG_RTL8821C
# define CONFIG_RTL8821C
# endif
# define CONFIG_USB_HCI
# define PLATFORM_LINUX
/*
* Wi - Fi Functions Config
*/
# define CONFIG_80211N_HT
# define CONFIG_80211AC_VHT
# ifdef CONFIG_80211AC_VHT
# ifndef CONFIG_80211N_HT
# define CONFIG_80211N_HT
# endif
# endif
# ifdef CONFIG_80211N_HT
/* #define CONFIG_BEAMFORMING */
# endif
/* set CONFIG_IOCTL_CFG80211 from Makefile */
# ifdef CONFIG_IOCTL_CFG80211
/*
* Indecate new sta asoc through cfg80211_new_sta
* If kernel version > = 3.2 or
* version < 3.2 but already apply cfg80211 patch ,
* RTW_USE_CFG80211_STA_EVENT must be defiend !
*/
/* Set RTW_USE_CFG80211_STA_EVENT from Makefile */
/* #define RTW_USE_CFG80211_STA_EVENT */ /* Indecate new sta asoc through cfg80211_new_sta */
# define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
/* #define CONFIG_DEBUG_CFG80211 */
/* #define CONFIG_DRV_ISSUE_PROV_REQ */ /* IOT FOR S2 */
# define CONFIG_SET_SCAN_DENY_TIMER
# endif
/*
* Internal General Config
*/
/* #define CONFIG_H2CLBK */
# define RTW_HALMAC /* Use HALMAC architecture, necessary for 8821C */
# define CONFIG_EMBEDDED_FWIMG
/* #define CONFIG_FILE_FWIMG */
# define CONFIG_XMIT_ACK
# ifdef CONFIG_XMIT_ACK
# define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
# endif
# define CONFIG_RECV_REORDERING_CTRL
/* #define CONFIG_SUPPORT_USB_INT */
# ifdef CONFIG_SUPPORT_USB_INT
/* #define CONFIG_USB_INTERRUPT_IN_PIPE*/
# endif
# ifdef CONFIG_POWER_SAVING
# define CONFIG_IPS
# ifdef CONFIG_IPS
/* #define CONFIG_IPS_LEVEL_2*/ /*enable this to set default IPS mode to IPS_LEVEL_2*/
# define CONFIG_IPS_CHECK_IN_WD /* Do IPS Check in WatchDog. */
# endif
/* #define SUPPORT_HW_RFOFF_DETECTED*/
# define CONFIG_LPS
# if defined(CONFIG_LPS)
/* #define CONFIG_LPS_LCLK*/
# endif
# ifdef CONFIG_LPS_LCLK
# ifdef CONFIG_POWER_SAVING
/* #define CONFIG_XMIT_THREAD_MODE */
# endif
# ifndef CONFIG_SUPPORT_USB_INT
# define LPS_RPWM_WAIT_MS 300
# define CONFIG_DETECT_CPWM_BY_POLLING
# endif /* !CONFIG_SUPPORT_USB_INT */
/* #define DBG_CHECK_FW_PS_STATE */
# endif
# ifdef CONFIG_LPS
# define CONFIG_WMMPS_STA 1
# endif /* CONFIG_LPS */
# endif /*CONFIG_POWER_SAVING*/
/* before link */
/* #define CONFIG_ANTENNA_DIVERSITY */
/* after link */
# ifdef CONFIG_ANTENNA_DIVERSITY
# define CONFIG_HW_ANTENNA_DIVERSITY
# endif
# ifdef CONFIG_AP_MODE
/* #define CONFIG_INTERRUPT_BASED_TXBCN */ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */
# if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
# undef CONFIG_INTERRUPT_BASED_TXBCN
# endif
# ifdef CONFIG_INTERRUPT_BASED_TXBCN
/* #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT */
# define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
# endif
# define CONFIG_NATIVEAP_MLME
# ifndef CONFIG_NATIVEAP_MLME
# define CONFIG_HOSTAPD_MLME
# endif
# define CONFIG_FIND_BEST_CHANNEL
# endif
# ifdef CONFIG_P2P
/* The CONFIG_WFD is for supporting the Wi-Fi display */
# define CONFIG_WFD
# define CONFIG_P2P_REMOVE_GROUP_INFO
/* #define CONFIG_DBG_P2P */
# define CONFIG_P2P_PS
/* #define CONFIG_P2P_IPS */
# define CONFIG_P2P_OP_CHK_SOCIAL_CH
# define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */
/*#define CONFIG_P2P_INVITE_IOT*/
# endif
/* Added by Kurt 20110511 */
# ifdef CONFIG_TDLS
# define CONFIG_TDLS_DRIVER_SETUP
/*
# ifndef CONFIG_WFD
# define CONFIG_WFD
# endif
*/
/* #define CONFIG_TDLS_AUTOSETUP */
# define CONFIG_TDLS_AUTOCHECKALIVE
# define CONFIG_TDLS_CH_SW /* Enable "CONFIG_TDLS_CH_SW" by default, however limit it to only work in wifi logo test mode but not in normal mode currently */
# endif
# define CONFIG_SKB_COPY /* amsdu */
# define CONFIG_RTW_LED
# ifdef CONFIG_RTW_LED
2022-11-28 18:29:12 +00:00
// #define CONFIG_RTW_SW_LED
2022-11-17 14:26:57 +00:00
# ifdef CONFIG_RTW_SW_LED
/* #define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */
# endif
# endif /* CONFIG_RTW_LED */
# define CONFIG_GLOBAL_UI_PID
/*#define CONFIG_RTW_80211K*/
/*#define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */
/*#define CONFIG_RESUME_IN_WORKQUEUE */
/*#define CONFIG_SET_SCAN_DENY_TIMER */
# define CONFIG_LONG_DELAY_ISSUE
# define CONFIG_NEW_SIGNAL_STAT_PROCESS
/* #define CONFIG_SIGNAL_DISPLAY_DBM */ /*display RX signal with dbm */
# ifdef CONFIG_SIGNAL_DISPLAY_DBM
/* #define CONFIG_BACKGROUND_NOISE_MONITOR */
# endif
# define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
/*
* Interface Related Config
*/
# ifndef CONFIG_MINIMAL_MEMORY_USAGE
# define CONFIG_USB_TX_AGGREGATION
# define CONFIG_USB_RX_AGGREGATION
# endif
/* #define CONFIG_REDUCE_USB_TX_INT*/ /* Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. */
/* #define CONFIG_EASY_REPLACEMENT*/
/*
* CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now !
*/
/* #define CONFIG_USE_USB_BUFFER_ALLOC_TX*/ /* Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. */
/* #define CONFIG_USE_USB_BUFFER_ALLOC_RX*/ /* For RX path */
# ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
# else
# define CONFIG_PREALLOC_RECV_SKB
# ifdef CONFIG_PREALLOC_RECV_SKB
/* #define CONFIG_FIX_NR_BULKIN_BUFFER */ /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */
# define CONFIG_USB_PROTECT_RX_CLONED_SKB
# endif
# endif
/*
* USB VENDOR REQ BUFFER ALLOCATION METHOD
* if not set we ' ll use function local variable ( stack memory )
*/
/* #define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE */
# define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
# define CONFIG_USB_VENDOR_REQ_MUTEX
# define CONFIG_VENDOR_REQ_RETRY
/* #define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ*/
# ifdef CONFIG_WOWLAN
# define CONFIG_GTK_OL
/* #define CONFIG_ARP_KEEP_ALIVE */
# endif /* CONFIG_WOWLAN */
# ifdef CONFIG_GPIO_WAKEUP
# ifndef WAKEUP_GPIO_IDX
# define WAKEUP_GPIO_IDX 6 /* WIFI Chip Side */
# endif /* WAKEUP_GPIO_IDX */
# endif /* CONFIG_GPIO_WAKEUP */
/*
* HAL Related Config
*/
/*#define CONFIG_RX_PACKET_APPEND_FCS*/
/*#define CONFIG_ADHOC_WORKAROUND_SETTING*/
# define DISABLE_BB_RF 0
# ifdef CONFIG_MP_INCLUDED
# define MP_DRIVER 1
# define CONFIG_MP_IWPRIV_SUPPORT
/*
# undef CONFIG_USB_TX_AGGREGATION
# undef CONFIG_USB_RX_AGGREGATION
*/
# else
# define MP_DRIVER 0
# endif
/*
* Platform Related Config
*/
# if defined(CONFIG_PLATFORM_ACTIONS_ATM702X)
# ifdef CONFIG_USB_TX_AGGREGATION
# undef CONFIG_USB_TX_AGGREGATION
# endif
# ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
# define CONFIG_USE_USB_BUFFER_ALLOC_TX
# endif
# ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX
# define CONFIG_USE_USB_BUFFER_ALLOC_RX
# endif
# endif
# ifdef CONFIG_BT_COEXIST
/* for ODM and outsrc BT-Coex */
# define BT_30_SUPPORT 1
# ifndef CONFIG_LPS
/* download reserved page to FW */
# define CONFIG_LPS
# endif
# else /* !CONFIG_BT_COEXIST */
# define BT_30_SUPPORT 0
# endif /* CONFIG_BT_COEXIST */
# ifdef CONFIG_USB_TX_AGGREGATION
/* #define CONFIG_TX_EARLY_MODE */
# endif
/*
* Debug Related Config
*/
# define DBG 1
# define DBG_CONFIG_ERROR_DETECT
/*#define DBG_CONFIG_ERROR_DETECT_INT*/
/*#define DBG_CONFIG_ERROR_RESET*/
/*#define DBG_IO*/
/*#define DBG_DELAY_OS*/
/*#ifndef DBG_MEM_ALLOC*/
/*#define DBG_MEM_ALLOC*/
/*#endif*/
/*#define DBG_MEMORY_LEAK*/
/*#define DBG_IOCTL*/
/*#define DBG_TX*/
/*#define DBG_XMIT_BUF*/
/*#define DBG_XMIT_BUF_EXT*/
/*#define DBG_TX_DROP_FRAME*/
/*#define DBG_RX_DROP_FRAME*/
/*#define DBG_RX_SEQ*/
/*#define DBG_RX_SIGNAL_DISPLAY_PROCESSING*/
/*#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"*/
/*#define DBG_ROAMING_TEST*/
/*#define DBG_HAL_INIT_PROFILING*/
/*#define DBG_FW_DEBUG_MSG_PKT*/ /* FW use this feature to tx debug broadcast pkt. This pkt include FW debug message*/
