mirrors/8821cu-20210916
1
0
Fork 0
mirror of https://github.com/morrownr/8821cu-20210916.git synced 2024-10-31 16:55:24 +00:00
Code Releases Activity
main
8821cu-20210916/include/rtl8188e_hal.h

322 lines
12 KiB
C
Raw Permalink Normal View History

initial commit
2022-11-17 14:26:57 +00:00
/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#ifndef __RTL8188E_HAL_H__
#define __RTL8188E_HAL_H__
/* #include "hal_com.h" */
#include "hal_data.h"
/* include HAL Related header after HAL Related compiling flags */
#include "rtl8188e_spec.h"
#include "Hal8188EPhyReg.h"
#include "Hal8188EPhyCfg.h"
#include "rtl8188e_rf.h"
#include "rtl8188e_dm.h"
#include "rtl8188e_recv.h"
#include "rtl8188e_xmit.h"
#include "rtl8188e_cmd.h"
#include "rtl8188e_led.h"
#include "Hal8188EPwrSeq.h"
#ifdef DBG_CONFIG_ERROR_DETECT
#include "rtl8188e_sreset.h"
#endif
/* --------------------------------------------------------------------- */
/* RTL8188E Power Configuration CMDs for USB/SDIO/PCIE interfaces */
/* --------------------------------------------------------------------- */
#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow
#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow
#define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow
#define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow
#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow
#define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow
#define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow
#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow
#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow
#if 1 /* download firmware related data structure */
#define MAX_FW_8188E_SIZE 0x8000 /* 32768, 32k / 16384, 16k */
#define FW_8188E_SIZE 0x4000 /* 16384, 16k */
#define FW_8188E_SIZE_2 0x8000 /* 32768, 32k */
#define FW_8188E_START_ADDRESS 0x1000
#define FW_8188E_END_ADDRESS 0x1FFF /* 0x5FFF */
#define IS_FW_HEADER_EXIST_88E(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature) & 0xFFF0) == 0x88E0)
typedef struct _RT_FIRMWARE_8188E {
FIRMWARE_SOURCE eFWSource;
#ifdef CONFIG_EMBEDDED_FWIMG
u8 *szFwBuffer;
#else
u8 szFwBuffer[MAX_FW_8188E_SIZE];
#endif
u32 ulFwLength;
} RT_FIRMWARE_8188E, *PRT_FIRMWARE_8188E;
/*
* This structure must be cared byte-ordering
* */
typedef struct _RT_8188E_FIRMWARE_HDR {
/* 8-byte alinment required */
/* --- LONG WORD 0 ---- */
u16 Signature; /* 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut */
u8 Category; /* AP/NIC and USB/PCI */
u8 Function; /* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */
u16 Version; /* FW Version */
u8 Subversion; /* FW Subversion, default 0x00 */
u16 Rsvd1;
/* --- LONG WORD 1 ---- */
u8 Month; /* Release time Month field */
u8 Date; /* Release time Date field */
u8 Hour; /* Release time Hour field */
u8 Minute; /* Release time Minute field */
u16 RamCodeSize; /* The size of RAM code */
u8 Foundry;
u8 Rsvd2;
/* --- LONG WORD 2 ---- */
u32 SvnIdx; /* The SVN entry index */
u32 Rsvd3;
/* --- LONG WORD 3 ---- */
u32 Rsvd4;
u32 Rsvd5;
} RT_8188E_FIRMWARE_HDR, *PRT_8188E_FIRMWARE_HDR;
#endif /* download firmware related data structure */
#define DRIVER_EARLY_INT_TIME_8188E 0x05
#define BCN_DMA_ATIME_INT_TIME_8188E 0x02
/* #define MAX_RX_DMA_BUFFER_SIZE_88E 0x2400 */ /* 9k for 88E nornal chip , */ /* MaxRxBuff=10k-max(TxReportSize(64*8), WOLPattern(16*24)) */
#ifdef CONFIG_USB_HCI
#define RX_DMA_SIZE_88E(__Adapter) 0x2800
#else
#define RX_DMA_SIZE_88E(__Adapter) ((!IS_VENDOR_8188E_I_CUT_SERIES(__Adapter))?0x2800:0x4000)
#endif
#ifdef CONFIG_WOWLAN
#define RESV_FMWF (WKFMCAM_SIZE * MAX_WKFM_CAM_NUM) /* 16 entries, for each is 24 bytes*/
#else
#define RESV_FMWF 0
#endif
#define RX_DMA_RESERVD_FW_FEATURE 0x200 /* for tx report (64*8) */
#define MAX_RX_DMA_BUFFER_SIZE_88E(__Adapter) (RX_DMA_SIZE_88E(__Adapter)-RX_DMA_RESERVD_FW_FEATURE)
#define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */
#define PAGE_SIZE_TX_88E PAGE_SIZE_128
/* Note: We will divide number of page equally for each queue other than public queue!
* 22k = 22528 bytes = 176 pages (@page = 128 bytes)
* BCN rsvd_page_num = MAX_BEACON_LEN / PAGE_SIZE_TX_88E
* 1 ps-poll / 1 null-data /1 prob_rsp /1 QOS null-data = 4 pages */
#define BCNQ_PAGE_NUM_88E (MAX_BEACON_LEN / PAGE_SIZE_TX_88E + 4) /*0x09*/
/* For WoWLan , more reserved page */
#ifdef CONFIG_WOWLAN
#ifdef CONFIG_WOW_KEEP_ALIVE_PATTERN
#define WOWLAN_KEEP_ALIVE_PAGE 0x02 /*for keep alive packet*/
#else
#define WOWLAN_KEEP_ALIVE_PAGE 0x00
#endif /*CONFIG_WOW_KEEP_ALIVE_PATTERN*/
/* 1 ArpRsp + 2 NbrAdv + 2 NDPInfo + 1 RCI + 1 AOAC = 7 pages */
#define WOWLAN_PAGE_NUM_88E (0x07+ WOWLAN_KEEP_ALIVE_PAGE)
#else
#define WOWLAN_PAGE_NUM_88E 0x00
#endif
/* Note:
Tx FIFO Size : previous CUT:22K /I_CUT after:32KB
Tx page Size : 128B
Total page numbers : 176(0xB0) / 256(0x100)
*/
#ifdef CONFIG_USB_HCI
#define TOTAL_PAGE_NUMBER_88E(_Adapter) (0xB0 - 1)
#else
#define TOTAL_PAGE_NUMBER_88E(_Adapter) ((IS_VENDOR_8188E_I_CUT_SERIES(_Adapter)?0x100:0xB0) - 1)/* must reserved 1 page for dma issue */
#endif
#define TX_TOTAL_PAGE_NUMBER_88E(_Adapter) (TOTAL_PAGE_NUMBER_88E(_Adapter) - BCNQ_PAGE_NUM_88E - WOWLAN_PAGE_NUM_88E)
#define TX_PAGE_BOUNDARY_88E(_Adapter) (TX_TOTAL_PAGE_NUMBER_88E(_Adapter) + 1) /* beacon header start address */
#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_88E(_Adapter) TX_TOTAL_PAGE_NUMBER_88E(_Adapter)
#define WMM_NORMAL_TX_PAGE_BOUNDARY_88E(_Adapter) (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_88E(_Adapter) + 1)
/* For Normal Chip Setting
* (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_8723B */
#define NORMAL_PAGE_NUM_HPQ_88E 0x0
#define NORMAL_PAGE_NUM_LPQ_88E 0x09
#define NORMAL_PAGE_NUM_NPQ_88E 0x0
/* Note: For Normal Chip Setting, modify later */
#define WMM_NORMAL_PAGE_NUM_HPQ_88E 0x29
#define WMM_NORMAL_PAGE_NUM_LPQ_88E 0x1C
#define WMM_NORMAL_PAGE_NUM_NPQ_88E 0x1C
/* -------------------------------------------------------------------------
* Chip specific
* ------------------------------------------------------------------------- */
#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22) & 0x3)
#define CHIP_BONDING_92C_1T2R 0x1
#define CHIP_BONDING_88C_USB_MCARD 0x2
#define CHIP_BONDING_88C_USB_HP 0x1
/* -------------------------------------------------------------------------
* Channel Plan
* ------------------------------------------------------------------------- */
#define EFUSE_REAL_CONTENT_LEN 512
#define EFUSE_MAP_LEN 128
#define EFUSE_MAX_SECTION 16
#define EFUSE_IC_ID_OFFSET 506 /* For some inferiority IC purpose. added by Roger, 2009.09.02. */
#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN)
/*
* <Roger_Notes>
* To prevent out of boundary programming case,
* leave 1byte and program full section
* 9bytes + 1byt + 5bytes and pre 1byte.
* For worst case:
* | 1byte|----8bytes----|1byte|--5bytes--|
* | | Reserved(14bytes) |
* */
#define EFUSE_OOB_PROTECT_BYTES 15 /* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
#define EFUSE_REAL_CONTENT_LEN_88E 256
#define EFUSE_MAP_LEN_88E 512
#define EFUSE_MAX_SECTION_88E 64
#define EFUSE_MAX_WORD_UNIT_88E 4
#define EFUSE_IC_ID_OFFSET_88E 506 /* For some inferiority IC purpose. added by Roger, 2009.09.02. */
#define AVAILABLE_EFUSE_ADDR_88E(addr) (addr < EFUSE_REAL_CONTENT_LEN_88E)
/* <Roger_Notes> To prevent out of boundary programming case, leave 1byte and program full section
* 9bytes + 1byt + 5bytes and pre 1byte.
* For worst case:
* | 2byte|----8bytes----|1byte|--7bytes--| */ /* 92D */
#define EFUSE_OOB_PROTECT_BYTES_88E 18 /* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
#define EFUSE_PROTECT_BYTES_BANK_88E 16
/* ********************************************************
* EFUSE for BT definition
* ******************************************************** */
#define EFUSE_BT_REAL_CONTENT_LEN 1536 /* 512*3 */
#define EFUSE_BT_MAP_LEN 1024 /* 1k bytes */
#define EFUSE_BT_MAX_SECTION 128 /* 1024/8 */
#define EFUSE_PROTECT_BYTES_BANK 16
#define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
#define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
/* #define IS_MULTI_FUNC_CHIP(_Adapter) (((((PHAL_DATA_TYPE)(_Adapter->HalData))->MultiFunc) & (RT_MULTI_FUNC_BT|RT_MULTI_FUNC_GPS)) ? _TRUE : _FALSE) */
/* #define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) ) */
#ifdef CONFIG_PCI_HCI
/* according to the define in the rtw_xmit.h, rtw_recv.h */
#define TX_DESC_NUM_8188EE TXDESC_NUM /* 128 */
#ifdef CONFIG_CONCURRENT_MODE
/*#define BE_QUEUE_TX_DESC_NUM_8188EE (TXDESC_NUM<<1)*/ /* 256 */
#define BE_QUEUE_TX_DESC_NUM_8188EE ((TXDESC_NUM<<1)+(TXDESC_NUM>>1)) /* 320 */
/*#define BE_QUEUE_TX_DESC_NUM_8188EE ((TXDESC_NUM<<1)+TXDESC_NUM)*/ /* 384 */
#else
#define BE_QUEUE_TX_DESC_NUM_8188EE TXDESC_NUM /* 128 */
/*#define BE_QUEUE_TX_DESC_NUM_8188EE (TXDESC_NUM+(TXDESC_NUM>>1)) */ /* 192 */
#endif
void InterruptRecognized8188EE(PADAPTER Adapter, PRT_ISR_CONTENT pIsrContent);
void UpdateInterruptMask8188EE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1);
#endif /* CONFIG_PCI_HCI */
/* rtl8188e_hal_init.c */
s32 rtl8188e_FirmwareDownload(PADAPTER padapter, BOOLEAN bUsedWoWLANFw);
void _8051Reset88E(PADAPTER padapter);
void rtl8188e_InitializeFirmwareVars(PADAPTER padapter);
s32 InitLLTTable(PADAPTER padapter, u8 txpktbuf_bndy);
/* EFuse */
u8 GetEEPROMSize8188E(PADAPTER padapter);
void Hal_InitPGData88E(PADAPTER padapter);
void Hal_EfuseParseIDCode88E(PADAPTER padapter, u8 *hwinfo);
void Hal_ReadTxPowerInfo88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseEEPROMVer88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void rtl8188e_EfuseParseChnlPlan(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseCustomerID88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadAntennaDiversity88E(PADAPTER pAdapter, u8 *PROMContent, BOOLEAN AutoLoadFail);
void Hal_ReadThermalMeter_88E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_EfuseParseXtal_8188E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseBoardType88E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadPowerSavingMode88E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadPAType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_ReadAmplifierType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_ReadRFEType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
BOOLEAN HalDetectPwrDownMode88E(PADAPTER Adapter);
#if defined(CONFIG_WOWLAN) || defined(CONFIG_AP_WOWLAN)
void Hal_DetectWoWMode(PADAPTER pAdapter);
#endif /* CONFIG_WOWLAN */
#ifdef CONFIG_RF_POWER_TRIM
void Hal_ReadRFGainOffset(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
#endif /*CONFIG_RF_POWER_TRIM*/
void InitBeaconParameters_8188e(_adapter *adapter);
void SetBeaconRelatedRegisters8188E(PADAPTER padapter);
void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);
void init_hal_spec_8188e(_adapter *adapter);
void rtl8188e_start_thread(_adapter *padapter);
void rtl8188e_stop_thread(_adapter *padapter);
void rtw_IOL_cmd_tx_pkt_buf_dump(ADAPTER *Adapter, int data_len);
#ifdef CONFIG_IOL_EFUSE_PATCH
s32 rtl8188e_iol_efuse_patch(PADAPTER padapter);
#endif/* CONFIG_IOL_EFUSE_PATCH */
void _InitTransferPageSize(PADAPTER padapter);
u8 SetHwReg8188E(PADAPTER padapter, u8 variable, u8 *val);
void GetHwReg8188E(PADAPTER padapter, u8 variable, u8 *val);
u8
GetHalDefVar8188E(
PADAPTER Adapter,
HAL_DEF_VARIABLE eVariable,
void *pValue
);
#ifdef CONFIG_GPIO_API
int rtl8188e_GpioFuncCheck(PADAPTER adapter, u8 gpio_num);
#endif
#endif /* __RTL8188E_HAL_H__ */
Copy Permalink