/****************************************************************************** * * Copyright(c) 2007 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ /* ***** temporarily flag ******* */ #define CONFIG_SINGLE_IMG /* #define CONFIG_DISABLE_ODM */ /* ***** temporarily flag ******* */ /* * Public General Config */ #define AUTOCONF_INCLUDED #define RTL871X_MODULE_NAME "8821AU" #ifndef DRV_NAME #define DRV_NAME "rtl8821au" #endif #define CONFIG_USB_HCI #define PLATFORM_LINUX /* #define CONFIG_IOCTL_CFG80211 1 */ #ifdef CONFIG_IOCTL_CFG80211 /* #define RTW_USE_CFG80211_STA_EVENT */ /* Indecate new sta asoc through cfg80211_new_sta */ #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER /* #define CONFIG_DEBUG_CFG80211 */ /* #define CONFIG_DRV_ISSUE_PROV_REQ */ /* IOT FOR S2 */ #define CONFIG_SET_SCAN_DENY_TIMER #endif /* * Internal General Config */ /* #define CONFIG_H2CLBK */ #define CONFIG_EMBEDDED_FWIMG 1 #if (CONFIG_EMBEDDED_FWIMG==1) #define LOAD_FW_HEADER_FROM_DRIVER #endif /* #define CONFIG_FILE_FWIMG */ #define CONFIG_XMIT_ACK #ifdef CONFIG_XMIT_ACK #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK #endif #define CONFIG_80211N_HT 1 #ifdef CONFIG_80211N_HT #define CONFIG_80211AC_VHT 1 #define CONFIG_BEAMFORMING #ifdef CONFIG_BEAMFORMING #define CONFIG_BEAMFORMER_FW_NDPA #define CONFIG_PHYDM_BEAMFORMING #ifdef CONFIG_PHYDM_BEAMFORMING #define BEAMFORMING_SUPPORT 1 /*for phydm beamforming*/ #define SUPPORT_MU_BF 0 #else #define BEAMFORMING_SUPPORT 0 /*for driver beamforming*/ #endif #endif #endif #define CONFIG_RECV_REORDERING_CTRL 1 #define CONFIG_DFS 1 /*#define CONFIG_SUPPORT_USB_INT*/ #ifdef CONFIG_SUPPORT_USB_INT /*#define CONFIG_USB_INTERRUPT_IN_PIPE 1*/ #endif #ifdef CONFIG_POWER_SAVING #define CONFIG_IPS 1 #ifdef CONFIG_IPS /* #define CONFIG_IPS_LEVEL_2 1 */ /* enable this to set default IPS mode to IPS_LEVEL_2 */ #define CONFIG_IPS_CHECK_IN_WD /* Do IPS Check in WatchDog. */ #endif /* #define SUPPORT_HW_RFOFF_DETECTED 1 */ #define CONFIG_LPS 1 #if defined(CONFIG_LPS) && defined(CONFIG_SUPPORT_USB_INT) /* #define CONFIG_LPS_LCLK 1 */ #endif #ifdef CONFIG_LPS_LCLK #define CONFIG_XMIT_THREAD_MODE #endif #endif /*CONFIG_POWER_SAVING*/ /*#define CONFIG_ANTENNA_DIVERSITY*/ /* #define CONFIG_CONCURRENT_MODE 1 */ #ifdef CONFIG_CONCURRENT_MODE #define CONFIG_RUNTIME_PORT_SWITCH /* #define DBG_RUNTIME_PORT_SWITCH */ /* #ifdef CONFIG_RTL8812A */ /* #define CONFIG_TSF_RESET_OFFLOAD 1 */ /* For 2 PORT TSF SYNC. */ /* #endif */ #endif /* #else */ /* #ifndef CONFIG_MP_INCLUDED */ /* #endif */ /* #ifndef CONFIG_MP_INCLUDED */ #define CONFIG_AP_MODE 1 #ifdef CONFIG_AP_MODE /* #define CONFIG_INTERRUPT_BASED_TXBCN */ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */ #if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN) #undef CONFIG_INTERRUPT_BASED_TXBCN #endif #ifdef CONFIG_INTERRUPT_BASED_TXBCN /* #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT */ #define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR #endif #define CONFIG_NATIVEAP_MLME #ifndef CONFIG_NATIVEAP_MLME #define CONFIG_HOSTAPD_MLME 1 #endif #define CONFIG_FIND_BEST_CHANNEL 1 /* #define CONFIG_AUTO_AP_MODE */ #endif #define CONFIG_P2P 1 #ifdef CONFIG_P2P /* The CONFIG_WFD is for supporting the Wi-Fi display */ #define CONFIG_WFD #define CONFIG_P2P_REMOVE_GROUP_INFO /* #define CONFIG_DBG_P2P */ #define CONFIG_P2P_PS #define CONFIG_P2P_OP_CHK_SOCIAL_CH #define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */ /*#define CONFIG_P2P_INVITE_IOT*/ #endif /* Added by Kurt 20110511 */ #ifdef CONFIG_TDLS #define CONFIG_TDLS_DRIVER_SETUP /* #ifndef CONFIG_WFD */ /* #define CONFIG_WFD */ /* #endif */ /* #define CONFIG_TDLS_AUTOSETUP */ #define CONFIG_TDLS_AUTOCHECKALIVE #define CONFIG_TDLS_CH_SW /* Enable this flag only when we confirm that TDLS CH SW is supported in FW */ #endif #ifdef CONFIG_BT_COEXIST /* for ODM and outsrc BT-Coex */ #ifndef CONFIG_LPS #define CONFIG_LPS /* download reserved page to FW */ #endif #endif /* !CONFIG_BT_COEXIST */ #define CONFIG_SKB_COPY 1/* for amsdu */ #define CONFIG_RTW_LED #ifdef CONFIG_RTW_LED #define CONFIG_RTW_SW_LED #ifdef CONFIG_RTW_SW_LED /* #define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */ #endif #endif /* CONFIG_RTW_LED */ #define CONFIG_GLOBAL_UI_PID #define CONFIG_LAYER2_ROAMING #define CONFIG_LAYER2_ROAMING_RESUME /* #define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */ /* #define CONFIG_RESUME_IN_WORKQUEUE */ /* #define CONFIG_SET_SCAN_DENY_TIMER */ #define CONFIG_LONG_DELAY_ISSUE #define CONFIG_NEW_SIGNAL_STAT_PROCESS /* #define CONFIG_SIGNAL_DISPLAY_DBM */ /* display RX signal with dbm */ #ifdef CONFIG_SIGNAL_DISPLAY_DBM /* #define CONFIG_BACKGROUND_NOISE_MONITOR */ #endif #define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */ #define CONFIG_TX_MCAST2UNI /*Support IP multicast->unicast*/ /* #define CONFIG_CHECK_AC_LIFETIME 1 */ /* Check packet lifetime of 4 ACs. */ #ifdef CONFIG_WOWLAN /* #define CONFIG_GTK_OL */ /* #define CONFIG_ARP_KEEP_ALIVE */ #endif /* CONFIG_WOWLAN */ #ifdef CONFIG_GPIO_WAKEUP #ifndef WAKEUP_GPIO_IDX #define WAKEUP_GPIO_IDX 1 /* WIFI Chip Side */ #endif /* !WAKEUP_GPIO_IDX */ #endif /* CONFIG_GPIO_WAKEUP */ /* * Interface Related Config */ #ifndef CONFIG_MINIMAL_MEMORY_USAGE #define CONFIG_USB_TX_AGGREGATION 1 #define CONFIG_USB_RX_AGGREGATION 1 #endif /* #define CONFIG_REDUCE_USB_TX_INT 1 */ /* Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. */ /* #define CONFIG_EASY_REPLACEMENT 1 */ /* * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now! */ /* #define CONFIG_USE_USB_BUFFER_ALLOC_TX 1 */ /* Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. */ /* #define CONFIG_USE_USB_BUFFER_ALLOC_RX 1 */ /* For RX path */ #ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX #else #define CONFIG_PREALLOC_RECV_SKB #ifdef CONFIG_PREALLOC_RECV_SKB /* #define CONFIG_FIX_NR_BULKIN_BUFFER */ /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */ #endif #endif /* * USB VENDOR REQ BUFFER ALLOCATION METHOD * if not set we'll use function local variable (stack memory) */ /* #define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE */ #define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC #define CONFIG_USB_VENDOR_REQ_MUTEX #define CONFIG_VENDOR_REQ_RETRY /* #define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ 1 */ /* * HAL Related Config */ #define RTL8812A_RX_PACKET_INCLUDE_CRC 0 #define CONFIG_RX_PACKET_APPEND_FCS /* #define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0 */ #define CONFIG_OUT_EP_WIFI_MODE 0 #define ENABLE_USB_DROP_INCORRECT_OUT #define CONFIG_ADHOC_WORKAROUND_SETTING 1 #define ENABLE_NEW_RFE_TYPE 0 #define DISABLE_BB_RF 0 #ifdef CONFIG_MP_INCLUDED #define MP_DRIVER 1 #define CONFIG_MP_IWPRIV_SUPPORT 1 /* #undef CONFIG_USB_TX_AGGREGATION */ /* #undef CONFIG_USB_RX_AGGREGATION */ #else #define MP_DRIVER 0 #endif /* * Platform Related Config */ #if defined(CONFIG_PLATFORM_ACTIONS_ATM702X) #ifdef CONFIG_USB_TX_AGGREGATION #undef CONFIG_USB_TX_AGGREGATION #endif #ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX #define CONFIG_USE_USB_BUFFER_ALLOC_TX #endif #ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX #define CONFIG_USE_USB_BUFFER_ALLOC_RX #ifdef CONFIG_PREALLOC_RECV_SKB #undef CONFIG_PREALLOC_RECV_SKB #endif #endif #endif #ifdef CONFIG_USB_TX_AGGREGATION /* #define CONFIG_TX_EARLY_MODE */ #endif #define RTL8188E_EARLY_MODE_PKT_NUM_10 0 #define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR /* * Debug Related Config */ //#define DBG 1 #define CONFIG_PROC_DEBUG /*#define DBG_IFACE_STATUS*/ #define DBG_CONFIG_ERROR_DETECT /* #define DBG_CONFIG_ERROR_DETECT_INT */ /* #define DBG_CONFIG_ERROR_RESET */ /* #define DBG_IO */ /* #define DBG_DELAY_OS */ /* #define DBG_MEM_ALLOC */ /* #define DBG_IOCTL */ /* #define DBG_TX */ /* #define DBG_XMIT_BUF */ /* #define DBG_XMIT_BUF_EXT */ /* #define DBG_TX_DROP_FRAME */ /* #define DBG_RX_DROP_FRAME */ /* #define DBG_RX_SEQ */ /* #define DBG_RX_SIGNAL_DISPLAY_PROCESSING */ /* #define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap" */ /* #define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE */ /* #define DBG_ROAMING_TEST */ /* #define DBG_HAL_INIT_PROFILING */ /*#define DBG_MEMORY_LEAK*/ /*#define DBG_UDP_PKT_LOSE_11AC */ #define DBG_RX_DFRAME_RAW_DATA