mirrors/rtl8812au
1
0
Fork 0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2024-11-23 05:44:40 +00:00
Code Releases Activity
dc8dcb4fa2
rtl8812au/hal/rtl8814a/usb/usb_halinit.c

2417 lines
64 KiB
C
Raw Normal View History

Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
Fixed build/compile error + some compiler warnings + minor cleanup
2019-11-11 00:04:53 +00:00
*
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#define _HCI_HAL_INIT_C_
/* #include <drv_types.h> */
#include <rtl8814a_hal.h>
#ifndef CONFIG_USB_HCI
#error "CONFIG_USB_HCI shall be on!\n"
#endif
static void _dbg_dump_macreg(_adapter *padapter)
{
u32 offset = 0;
u32 val32 = 0;
u32 index = 0 ;
for (index = 0; index < 64; index++) {
offset = index * 4;
val32 = rtw_read32(padapter, offset);
RTW_INFO("offset : 0x%02x ,val:0x%08x\n", offset, val32);
}
}
static VOID
_ConfigChipOutEP_8814(
IN PADAPTER pAdapter,
IN u8 NumOutPipe
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
pHalData->OutEpQueueSel = 0;
pHalData->OutEpNumber = 0;
switch (NumOutPipe) {
case 4:
pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ | TX_SELE_EQ;
pHalData->OutEpNumber = 4;
break;
case 3:
pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ;
pHalData->OutEpNumber = 3;
break;
case 2:
pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_NQ;
pHalData->OutEpNumber = 2;
break;
case 1:
pHalData->OutEpQueueSel = TX_SELE_HQ;
pHalData->OutEpNumber = 1;
break;
default:
break;
}
RTW_INFO("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n", __FUNCTION__, pHalData->OutEpQueueSel, pHalData->OutEpNumber);
}
static BOOLEAN HalUsbSetQueuePipeMapping8814AUsb(
IN PADAPTER pAdapter,
IN u8 NumInPipe,
IN u8 NumOutPipe
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
BOOLEAN result = _FALSE;
_ConfigChipOutEP_8814(pAdapter, NumOutPipe);
// Normal chip with one IN and one OUT doesn't have interrupt IN EP.
if(1 == pHalData->OutEpNumber){
if(1 != NumInPipe){
return result;
}
}
// All config other than above support one Bulk IN and one Interrupt IN.
//if(2 != NumInPipe){
// return result;
//}
result = Hal_MappingOutPipe(pAdapter, NumOutPipe);
return result;
}
void rtl8814au_interface_configure(_adapter *padapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
if (IS_SUPER_SPEED_USB(padapter))
{
pHalData->UsbBulkOutSize = USB_SUPER_SPEED_BULK_SIZE;//1024 bytes
}
else if (IS_HIGH_SPEED_USB(padapter))
{
pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;//512 bytes
}
else
{
pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;//64 bytes
}
pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber;
#ifdef CONFIG_USB_TX_AGGREGATION
pHalData->UsbTxAggMode = 1;
pHalData->UsbTxAggDescNum = 3; /* only 4 bits */
#endif //CONFIG_USB_TX_AGGREGATION
#ifdef CONFIG_USB_RX_AGGREGATION
pHalData->rxagg_mode = RX_AGG_DMA; //todo: change to USB_RX_AGG_DMA;
pHalData->rxagg_usb_size = 8; //unit : 512b
pHalData->rxagg_usb_timeout = 0x6;
pHalData->rxagg_dma_size = 16; //uint :128 b //0x0A; // 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize
pHalData->rxagg_dma_timeout = 0x6; //6, absolute time = 34ms/(2^6)
if (IS_SUPER_SPEED_USB(padapter)) {
pHalData->rxagg_usb_size = 0x7;
pHalData->rxagg_usb_timeout = 0x1a;
} else {
#ifdef CONFIG_PREALLOC_RX_SKB_BUFFER
u32 remainder = 0;
u8 quotient = 0;
remainder = MAX_RECVBUF_SZ % (4 * 1024);
quotient = (u8)(MAX_RECVBUF_SZ >> 12);
if (quotient > 5) {
pHalData->rxagg_usb_size = 0x5;
pHalData->rxagg_usb_timeout = 0x20;
} else {
if (remainder >= 2048) {
pHalData->rxagg_usb_size = quotient;
pHalData->rxagg_usb_timeout = 0x10;
} else {
pHalData->rxagg_usb_size = (quotient - 1);
pHalData->rxagg_usb_timeout = 0x10;
}
}
#else /* !CONFIG_PREALLOC_RX_SKB_BUFFER */
//the setting to reduce RX FIFO overflow on USB2.0 and increase rx throughput
pHalData->rxagg_dma_size = 0x5;
pHalData->rxagg_usb_timeout = 0x20;
#endif /* CONFIG_PREALLOC_RX_SKB_BUFFER */
}
#endif //CONFIG_USB_RX_AGGREGATION
HalUsbSetQueuePipeMapping8814AUsb(padapter,
pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes);
}
static VOID
_InitBurstPktLen(IN PADAPTER Adapter)
{
u8 u1bTmp;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
//yx_qi 131128 move to 0x1448, 144c
rtw_write32(Adapter, REG_FAST_EDCA_VOVI_SETTING_8814A, 0x08070807); //yx_qi 131128
rtw_write32(Adapter, REG_FAST_EDCA_BEBK_SETTING_8814A, 0x08070807); //yx_qi 131128
u1bTmp = rtw_read8(Adapter, 0xff); //check device operation speed: SS 0xff bit7
if(u1bTmp & BIT7) //USB2/1.1 Mode
{
pHalData->bSupportUSB3 = FALSE;
}
else //USB3 Mode
{
pHalData->bSupportUSB3 = TRUE;
}
if(pHalData->bSupportUSB3 == _FALSE) //USB2/1.1 Mode
{
if(pHalData->UsbBulkOutSize == 512)
{
//set burst pkt len=512B
rtw_write8(Adapter, REG_RXDMA_MODE_8814A, 0x1e);
}
else
{
//set burst pkt len=64B
rtw_write8(Adapter, REG_RXDMA_MODE_8814A, 0x2e);
}
rtw_write16(Adapter, REG_RXDMA_AGG_PG_TH_8814A,0x2005); //dmc agg th 20K
}
else //USB3 Mode
{
//set burst pkt len=1k
rtw_write8(Adapter, REG_RXDMA_MODE_8814A, 0x0e);
rtw_write16(Adapter, REG_RXDMA_AGG_PG_TH_8814A,0x0a05); //dmc agg th 20K
// set Reg 0xf008[3:4] to 2'00 to disable U1/U2 Mode to avoid 2.5G spur in USB3.0. added by page, 20120712
rtw_write8(Adapter, 0xf008, rtw_read8(Adapter, 0xf008)&0xE7);
//to avoid usb 3.0 H2C fail
rtw_write16(Adapter, 0xf002, 0);
rtw_write8(Adapter, REG_SW_AMPDU_BURST_MODE_CTRL_8814A, rtw_read8(Adapter, REG_SW_AMPDU_BURST_MODE_CTRL_8814A) & ~BIT(6));
RTW_INFO("turn off the LDPC pre-TX\n");
}
if(pHalData->AMPDUBurstMode)
{
rtw_write8(Adapter,REG_SW_AMPDU_BURST_MODE_CTRL_8814A, 0x5F);
}
}
VOID
_InitQueueReservedPage_8814AUsb(
IN PADAPTER Adapter
)
{
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 txpktbuf_bndy;
RTW_INFO("===>_InitQueueReservedPage_8814AUsb()\n");
//---- Set Fifo page for each Queue under Mac Direct LPBK nonsec mode ------------//
rtw_write32(Adapter, REG_FIFOPAGE_INFO_1_8814A, HPQ_PGNUM_8814A);
rtw_write32(Adapter, REG_FIFOPAGE_INFO_2_8814A, LPQ_PGNUM_8814A);
rtw_write32(Adapter, REG_FIFOPAGE_INFO_3_8814A, NPQ_PGNUM_8814A);
rtw_write32(Adapter, REG_FIFOPAGE_INFO_4_8814A, EPQ_PGNUM_8814A);
rtw_write32(Adapter, REG_FIFOPAGE_INFO_5_8814A, PUB_PGNUM_8814A);
rtw_write32(Adapter, REG_RQPN_CTRL_2_8814A, 0x80000000);
if(!pregistrypriv->wifi_spec)
txpktbuf_bndy = TX_PAGE_BOUNDARY_8814A;
else // for WMM
txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8814A;
//Set page boundary and header
rtw_write16(Adapter,REG_TXPKTBUF_BCNQ_BDNY_8814A, txpktbuf_bndy);
rtw_write16(Adapter,REG_TXPKTBUF_BCNQ1_BDNY_8814A, txpktbuf_bndy);
rtw_write16(Adapter,REG_MGQ_PGBNDY_8814A, txpktbuf_bndy);
//Set The head page of packet of Bcnq
rtw_write16(Adapter,REG_FIFOPAGE_CTRL_2_8814A, txpktbuf_bndy);
//The head page of packet of Bcnq1
rtw_write16(Adapter,REG_FIFOPAGE_CTRL_2_8814A+2,txpktbuf_bndy);
RTW_INFO("<===_InitQueueReservedPage_8814AUsb()\n");
}
static u32 _InitPowerOn_8814AU(_adapter *padapter)
{
int status = _SUCCESS;
u16 u2btmp=0;
// YX sugguested 2014.06.03
u8 u1btmp = rtw_read8(padapter, 0x10C2);
rtw_write8(padapter, 0x10C2, (u1btmp | BIT1));
Fixed build/compile error + some compiler warnings + minor cleanup
2019-11-11 00:04:53 +00:00
if(!HalPwrSeqCmdParsing(padapter, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8814A_NIC_ENABLE_FLOW))
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
return _FAIL;
// Enable MAC DMA/WMAC/SCHEDULE/SEC block
// Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31.
rtw_write16(padapter, REG_CR_8814A, 0x00); //suggseted by zhouzhou, by page, 20111230
u2btmp = PlatformEFIORead2Byte(padapter, REG_CR_8814A);
u2btmp |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN
| PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN);
rtw_write16(padapter, REG_CR_8814A, u2btmp);
_InitQueueReservedPage_8814AUsb(padapter);
return status;
}
//---------------------------------------------------------------
//
// MAC init functions
//
//---------------------------------------------------------------
// Shall USB interface init this?
static VOID
_InitInterrupt_8814AU(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
// HIMR
rtw_write32(Adapter, REG_HIMR0_8814A, pHalData->IntrMask[0]&0xFFFFFFFF);
rtw_write32(Adapter, REG_HIMR1_8814A, pHalData->IntrMask[1]&0xFFFFFFFF);
}
static void _InitID_8814A(IN PADAPTER Adapter)
{
// hal_init_macaddr(Adapter);//set mac_address
//rtw_restore_mac_addr(Adapter);
}
static VOID
_InitPageBoundary_8814AUsb(
IN PADAPTER Adapter
)
{
//20130416 KaiYuan modified for 8814
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
rtw_write16(Adapter, REG_RXFF_PTR_8814A, RX_DMA_BOUNDARY_8814A); //yx_qi 20140331
}
static VOID
_InitNormalChipRegPriority_8814AUsb(
IN PADAPTER Adapter,
IN u16 beQ,
IN u16 bkQ,
IN u16 viQ,
IN u16 voQ,
IN u16 mgtQ,
IN u16 hiQ
)
{
u16 value16 = (PlatformEFIORead2Byte(Adapter, REG_TRXDMA_CTRL_8814A) & 0x7);
value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) |
_TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) |
_TXDMA_MGQ_MAP(mgtQ)| _TXDMA_HIQ_MAP(hiQ) | BIT2;
rtw_write16(Adapter, REG_TRXDMA_CTRL_8814A, value16);
}
static VOID
_InitNormalChipTwoOutEpPriority_8814AUsb(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 beQ,bkQ,viQ,voQ,mgtQ,hiQ;
u16 valueHi = 0;
u16 valueLow = 0;
switch(pHalData->OutEpQueueSel)
{
case (TX_SELE_HQ | TX_SELE_LQ):
valueHi = QUEUE_HIGH;
valueLow = QUEUE_LOW;
break;
case (TX_SELE_NQ | TX_SELE_LQ):
valueHi = QUEUE_NORMAL;
valueLow = QUEUE_LOW;
break;
case (TX_SELE_HQ | TX_SELE_NQ):
valueHi = QUEUE_HIGH;
valueLow = QUEUE_NORMAL;
break;
default:
valueHi = QUEUE_HIGH;
valueLow = QUEUE_NORMAL;
break;
}
if(!pregistrypriv->wifi_spec){
beQ = valueLow;
bkQ = valueLow;
viQ = valueHi;
voQ = valueHi;
mgtQ = valueHi;
hiQ = valueHi;
}
else{//for WMM ,CONFIG_OUT_EP_WIFI_MODE
beQ = valueLow;
bkQ = valueHi;
viQ = valueHi;
voQ = valueLow;
mgtQ = valueHi;
hiQ = valueHi;
}
_InitNormalChipRegPriority_8814AUsb(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ);
}
static VOID
_InitNormalChipThreeOutEpPriority_8814AUsb(
IN PADAPTER Adapter
)
{
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 beQ,bkQ,viQ,voQ,mgtQ,hiQ;
if(!pregistrypriv->wifi_spec){// typical setting
beQ = QUEUE_LOW;
bkQ = QUEUE_LOW;
viQ = QUEUE_NORMAL;
voQ = QUEUE_HIGH;
mgtQ = QUEUE_HIGH;
hiQ = QUEUE_HIGH;
}
else{// for WMM
beQ = QUEUE_LOW;
bkQ = QUEUE_NORMAL;
viQ = QUEUE_NORMAL;
voQ = QUEUE_HIGH;
mgtQ = QUEUE_HIGH;
hiQ = QUEUE_HIGH;
}
_InitNormalChipRegPriority_8814AUsb(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ);
}
static VOID
_InitQueuePriority_8814AUsb(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
switch(pHalData->OutEpNumber)
{
case 2:
_InitNormalChipTwoOutEpPriority_8814AUsb(Adapter);
break;
case 3:
case 4:
_InitNormalChipThreeOutEpPriority_8814AUsb(Adapter);
break;
default:
RTW_INFO("_InitQueuePriority_8814AUsb(): Shall not reach here!\n");
break;
}
}
static VOID
_InitHardwareDropIncorrectBulkOut_8814A(
IN PADAPTER Adapter
)
{
#ifdef ENABLE_USB_DROP_INCORRECT_OUT
u32 value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK);
value32 |= DROP_DATA_EN;
rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32);
#endif //ENABLE_USB_DROP_INCORRECT_OUT
}
static VOID
_InitNetworkType_8814A(
IN PADAPTER Adapter
)
{
u32 value32;
value32 = rtw_read32(Adapter, REG_CR);
// TODO: use the other function to set network type
value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP);
rtw_write32(Adapter, REG_CR, value32);
}
static VOID
_InitTransferPageSize_8814AUsb(
IN PADAPTER Adapter
)
{
//8814 doesn't need this by Alex
}
static VOID
_InitDriverInfoSize_8814A(
IN PADAPTER Adapter,
IN u8 drvInfoSize
)
{
rtw_write8(Adapter,REG_RX_DRVINFO_SZ, drvInfoSize);
}
/*
static VOID
_InitWMACSetting_8814A(
IN PADAPTER Adapter
)
{
//u32 value32;
u16 value16;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
//pHalData->ReceiveConfig = AAP | APM | AM | AB | APP_ICV | ADF | AMF | APP_FCS | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS;
pHalData->ReceiveConfig =
RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYST_RXFF;
#if (1 == RTL8812A_RX_PACKET_INCLUDE_CRC)
pHalData->ReceiveConfig |= ACRC32;
#endif //(1 == RTL8812A_RX_PACKET_INCLUDE_CRC)
#ifdef CONFIG_RX_PACKET_APPEND_FCS
pHalData->ReceiveConfig |= RCR_APPFCS;
#endif //CONFIG_RX_PACKET_APPEND_FCS
pHalData->ReceiveConfig |= FORCEACK;
// some REG_RCR will be modified later by phy_ConfigMACWithHeaderFile()
rtw_write32(Adapter, REG_RCR, pHalData->ReceiveConfig);
// Accept all multicast address
rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF);
rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF);
// Accept all data frames
//value16 = 0xFFFF;
//rtw_write16(Adapter, REG_RXFLTMAP2, value16);
// 2010.09.08 hpfan
// Since ADF is removed from RCR, ps-poll will not be indicate to driver,
// RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll.
value16 = BIT10;
#ifdef CONFIG_BEAMFORMING
// NDPA packet subtype is 0x0101
value16 |= BIT5;
#endif
rtw_write16(Adapter, REG_RXFLTMAP1, value16);
// Accept all management frames
//value16 = 0xFFFF;
//rtw_write16(Adapter, REG_RXFLTMAP0, value16);
//enable RX_SHIFT bits
//rtw_write8(Adapter, REG_TRXDMA_CTRL, rtw_read8(Adapter, REG_TRXDMA_CTRL)|BIT(1));
}
*/
//old _InitWMACSetting_8812A + _InitAdaptiveCtrl_8812AUsb = new _InitMacConfigure_8814A
static VOID
_InitMacConfigure_8814A(
IN PADAPTER Adapter
)
{
u16 value16;
u32 regRRSR;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
switch (Adapter->registrypriv.wireless_mode)
{
case WIRELESS_11B:
regRRSR = RATE_ALL_CCK;
break;
case WIRELESS_11G:
case WIRELESS_11A:
case WIRELESS_11_5N:
case WIRELESS_11A_5N://Todo: no basic rate for ofdm ?
case WIRELESS_11_5AC:
regRRSR = RATE_ALL_OFDM_AG;
break;
case WIRELESS_11BG:
case WIRELESS_11G_24N:
case WIRELESS_11_24N:
case WIRELESS_11BG_24N:
default:
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
break;
}
// Init value for RRSR.
rtw_write32(Adapter, REG_RRSR, regRRSR);
// Retry Limit
value16 = BIT_LRL(0x30) | BIT_SRL(0x30);
rtw_write16(Adapter, REG_RETRY_LIMIT, value16);
pHalData->ReceiveConfig = RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYST_RXFF;
pHalData->ReceiveConfig |= FORCEACK;
#if (1 == RTL8812A_RX_PACKET_INCLUDE_CRC)
pHalData->ReceiveConfig |= ACRC32;
#endif //(1 == RTL8812A_RX_PACKET_INCLUDE_CRC)
#ifdef CONFIG_RX_PACKET_APPEND_FCS
pHalData->ReceiveConfig |= RCR_APPFCS;
#endif //CONFIG_RX_PACKET_APPEND_FCS
rtw_write32(Adapter, REG_RCR, pHalData->ReceiveConfig);
// 2010.09.08 hpfan
// Since ADF is removed from RCR, ps-poll will not be indicate to driver,
// RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll.
value16 = BIT10;
#ifdef CONFIG_BEAMFORMING
// NDPA packet subtype is 0x0101
value16 |= BIT5;
#endif /*CONFIG_BEAMFORMING*/
rtw_write16(Adapter, REG_RXFLTMAP1, value16);
// 201409/25 MH When RA is enabled, we need to reduce the value.
rtw_write8(Adapter, REG_MAX_AGGR_NUM_8814A, 0x36);
rtw_write8(Adapter, REG_RTS_MAX_AGGR_NUM_8814A,0x36);
}
/*
static VOID
_InitAdaptiveCtrl_8812AUsb(
IN PADAPTER Adapter
)
{
u16 value16;
u32 value32;
// Response Rate Set
value32 = rtw_read32(Adapter, REG_RRSR);
value32 &= ~RATE_BITMAP_ALL;
if(Adapter->registrypriv.wireless_mode & WIRELESS_11B)
value32 |= RATE_RRSR_CCK_ONLY_1M;
else
value32 |= RATE_RRSR_WITHOUT_CCK;
value32 |= RATE_RRSR_CCK_ONLY_1M;
rtw_write32(Adapter, REG_RRSR, value32);
// CF-END Threshold
//m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1);
// SIFS (used in NAV)
value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
rtw_write16(Adapter, REG_SPEC_SIFS, value16);
// Retry Limit
value16 = _LRL(0x30) | _SRL(0x30);
rtw_write16(Adapter, REG_RL, value16);
}*/
static VOID
_InitEDCA_8814AUsb(
IN PADAPTER Adapter
)
{
// Set Spec SIFS (used in NAV)
rtw_write16(Adapter,REG_SPEC_SIFS, 0x100a);
rtw_write16(Adapter,REG_MAC_SPEC_SIFS, 0x100a);
// Set SIFS for CCK
rtw_write16(Adapter,REG_SIFS_CTX, 0x100a);
// Set SIFS for OFDM
rtw_write16(Adapter,REG_SIFS_TRX, 0x100a);
// TXOP
rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B);
rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F);
rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324);
rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226);
// 0x50 for 80MHz clock
//rtw_write8(Adapter, REG_USTIME_TSF, 0x50);
//rtw_write8(Adapter, REG_USTIME_EDCA, 0x50);
}
static VOID
_InitBeaconMaxError_8814A(
IN PADAPTER Adapter,
IN BOOLEAN InfraMode
)
{
#ifdef CONFIG_ADHOC_WORKAROUND_SETTING
rtw_write8(Adapter, REG_BCN_MAX_ERR, 0xFF);
#else
//rtw_write8(Adapter, REG_BCN_MAX_ERR, (InfraMode ? 0xFF : 0x10));
#endif
}
#ifdef CONFIG_RTW_LED
static void _InitHWLed(PADAPTER Adapter)
{
struct led_priv *pledpriv = adapter_to_led(Adapter);
if( pledpriv->LedStrategy != HW_LED)
return;
// HW led control
// to do ....
//must consider cases of antenna diversity/ commbo card/solo card/mini card
}
#endif //CONFIG_LED
/*
static VOID
_InitRDGSetting_8812A(
IN PADAPTER Adapter
)
{
rtw_write8(Adapter,REG_RD_CTRL,0xFF);
rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200);
rtw_write8(Adapter,REG_RD_RESP_PKT_TH,0x05);
}*/
static VOID
_InitRetryFunction_8814A(
IN PADAPTER Adapter
)
{
u8 value8;
value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
value8 |= EN_AMPDU_RTY_NEW;
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
// Set ACK timeout
//rtw_write8(Adapter, REG_ACKTO, 0x40); //masked by page for BCM IOT issue temporally
rtw_write8(Adapter, REG_ACKTO, 0x80);
}
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingTxUpdate()
*
* Overview: Seperate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: PADAPTER
*
* Output/Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Seperate to smaller function.
*
*---------------------------------------------------------------------------*/
static VOID
usb_AggSettingTxUpdate_8814A(
IN PADAPTER Adapter
)
{
#ifdef CONFIG_USB_TX_AGGREGATION
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32 value32;
if(Adapter->registrypriv.wifi_spec)
pHalData->UsbTxAggDescNum = 1;
if(pHalData->UsbTxAggMode){
value32 = rtw_read32(Adapter, REG_TDECTRL);
value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT);
value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT);
rtw_write32(Adapter, REG_TDECTRL, value32);
rtw_write8(Adapter, REG_TDECTRL+3, pHalData->UsbTxAggDescNum<<1);
}
#endif //CONFIG_USB_TX_AGGREGATION
} // usb_AggSettingTxUpdate
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingRxUpdate()
*
* Overview: Seperate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: PADAPTER
*
* Output/Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Seperate to smaller function.
*
*---------------------------------------------------------------------------*/
static VOID
usb_AggSettingRxUpdate_8814A(
IN PADAPTER Adapter
)
{
#ifdef CONFIG_USB_RX_AGGREGATION
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 valueDMA;
u8 valueUSB;
valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL_8814A);
valueUSB = rtw_read8(Adapter, REG_RXDMA_AGG_PG_TH_8814A+3);
switch(pHalData->rxagg_mode)
{
case RX_AGG_DMA:
valueDMA |= RXDMA_AGG_EN;
valueUSB &= ~USB_AGG_EN_8814A; //yx_qi 131128
break;
case RX_AGG_USB:
valueDMA &= ~RXDMA_AGG_EN;
valueUSB |= USB_AGG_EN_8814A;
break;
case RX_AGG_MIX:
valueDMA |= RXDMA_AGG_EN;
valueUSB |= USB_AGG_EN_8814A;
break;
case RX_AGG_DISABLE:
default:
valueDMA &= ~RXDMA_AGG_EN;
valueUSB &= ~USB_AGG_EN_8814A;
break;
}
rtw_write8(Adapter, REG_TRXDMA_CTRL_8814A, valueDMA);
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH_8814A+3, valueUSB); //yx_qi 131128
#endif //CONFIG_USB_RX_AGGREGATION
} // usb_AggSettingRxUpdate
static VOID
init_UsbAggregationSetting_8814A(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
// Tx aggregation setting
usb_AggSettingTxUpdate_8814A(Adapter);
// Rx aggregation setting
usb_AggSettingRxUpdate_8814A(Adapter);
// 201/12/10 MH Add for USB agg mode dynamic switch.
pHalData->UsbRxHighSpeedMode = _FALSE;
pHalData->UsbTxVeryHighSpeedMode = _FALSE;
}
/*-----------------------------------------------------------------------------
* Function: USB_AggModeSwitch()
*
* Overview: When RX traffic is more than 40M, we need to adjust some parameters to increase
* RX speed by increasing batch indication size. This will decrease TCP ACK speed, we
* need to monitor the influence of FTP/network share.
* For TX mode, we are still ubder investigation.
*
* Input: PADAPTER
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Create Version 0.
*
*---------------------------------------------------------------------------*/
static VOID
USB_AggModeSwitch(
IN PADAPTER Adapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
//pHalData->UsbRxHighSpeedMode = _FALSE;
// How to measure the RX speed? We assume that when traffic is more than
if (pMgntInfo->bRegAggDMEnable == _FALSE)
{
return; // Inf not support.
}
if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == _TRUE &&
pHalData->UsbRxHighSpeedMode == _FALSE)
{
pHalData->UsbRxHighSpeedMode = _TRUE;
RT_TRACE(COMP_INIT, DBG_LOUD, ("UsbAggModeSwitchCheck to HIGH\n"));
}
else if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == _FALSE &&
pHalData->UsbRxHighSpeedMode == _TRUE)
{
pHalData->UsbRxHighSpeedMode = _FALSE;
RT_TRACE(COMP_INIT, DBG_LOUD, ("UsbAggModeSwitchCheck to LOW\n"));
}
else
{
return;
}
#if USB_RX_AGGREGATION_92C
if (pHalData->UsbRxHighSpeedMode == _TRUE)
{
// 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator.
// USB mode
#if (RT_PLATFORM == PLATFORM_LINUX)
if (pMgntInfo->LinkDetectInfo.bTxBusyTraffic)
{
pHalData->RxAggBlockCount = 16;
pHalData->RxAggBlockTimeout = 7;
}
else
#endif
{
pHalData->RxAggBlockCount = 40;
pHalData->RxAggBlockTimeout = 5;
}
// Mix mode
pHalData->RxAggPageCount = 72;
pHalData->RxAggPageTimeout = 6;
}
else
{
// USB mode
pHalData->RxAggBlockCount = pMgntInfo->RegRxAggBlockCount;
pHalData->RxAggBlockTimeout = pMgntInfo->RegRxAggBlockTimeout;
// Mix mode
pHalData->RxAggPageCount = pMgntInfo->RegRxAggPageCount;
pHalData->RxAggPageTimeout = pMgntInfo->RegRxAggPageTimeout;
}
if (pHalData->RxAggBlockCount > MAX_RX_AGG_BLKCNT)
pHalData->RxAggBlockCount = MAX_RX_AGG_BLKCNT;
#if (OS_WIN_FROM_VISTA(OS_VERSION)) || (RT_PLATFORM == PLATFORM_LINUX) // do not support WINXP to prevent usbehci.sys BSOD
if (IS_WIRELESS_MODE_N_24G(Adapter) || IS_WIRELESS_MODE_N_5G(Adapter))
{
//
// 2010/12/24 MH According to V1012 QC IOT test, XP BSOD happen when running chariot test
// with the aggregation dynamic change!! We need to disable the function to prevent it is broken
// in usbehci.sys.
//
usb_AggSettingRxUpdate_8188E(Adapter);
// 2010/12/27 MH According to designer's suggstion, we can only modify Timeout value. Otheriwse
// there might many HW incorrect behavior, the XP BSOD at usbehci.sys may be relative to the
// issue. Base on the newest test, we can not enable block cnt > 30, otherwise XP usbehci.sys may
// BSOD.
}
#endif
#endif
#endif
} // USB_AggModeSwitch
static VOID
_InitOperationMode_8814A(
IN PADAPTER Adapter
)
{
#if 0//gtest
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
u8 regBwOpMode = 0;
u32 regRATR = 0, regRRSR = 0;
//1 This part need to modified according to the rate set we filtered!!
//
// Set RRSR, RATR, and REG_BWOPMODE registers
//
switch(Adapter->RegWirelessMode)
{
case WIRELESS_MODE_B:
regBwOpMode = BW_OPMODE_20MHZ;
regRATR = RATE_ALL_CCK;
regRRSR = RATE_ALL_CCK;
break;
case WIRELESS_MODE_A:
regBwOpMode = BW_OPMODE_5G |BW_OPMODE_20MHZ;
regRATR = RATE_ALL_OFDM_AG;
regRRSR = RATE_ALL_OFDM_AG;
break;
case WIRELESS_MODE_G:
regBwOpMode = BW_OPMODE_20MHZ;
regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
break;
case WIRELESS_MODE_AUTO:
if (Adapter->bInHctTest)
{
regBwOpMode = BW_OPMODE_20MHZ;
regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
}
else
{
regBwOpMode = BW_OPMODE_20MHZ;
regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
}
break;
case WIRELESS_MODE_N_24G:
// It support CCK rate by default.
// CCK rate will be filtered out only when associated AP does not support it.
regBwOpMode = BW_OPMODE_20MHZ;
regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
break;
case WIRELESS_MODE_N_5G:
regBwOpMode = BW_OPMODE_5G;
regRATR = RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
regRRSR = RATE_ALL_OFDM_AG;
break;
default: //for MacOSX compiler warning.
break;
}
// Ziv ????????
//rtw_write32(Adapter, REG_INIRTS_RATE_SEL, regRRSR);
rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
#endif
}
/*
// Set CCK and OFDM Block "ON"
static VOID _BBTurnOnBlock(
IN PADAPTER Adapter
)
{
#if (DISABLE_BB_RF)
return;
#endif
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
}
static VOID _RfPowerSave(
IN PADAPTER Adapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
u8 eRFPath;
#if (DISABLE_BB_RF)
return;
#endif
if(pMgntInfo->RegRfOff == _TRUE){ // User disable RF via registry.
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RegRfOff.\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
// Those action will be discard in MgntActSet_RF_State because off the same state
for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, eRFPath, 0x4, 0xC00, 0x0);
}
else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS){ // H/W or S/W RF OFF before sleep.
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RfOffReason(%ld).\n", pMgntInfo->RfOffReason));
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
}
else{
pHalData->eRFPowerState = eRfOn;
pMgntInfo->RfOffReason = 0;
if(Adapter->bInSetPower || Adapter->bResetInProgress)
PlatformUsbEnableInPipes(Adapter);
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): RF is on.\n"));
}
#endif
}
*/
enum {
Antenna_Lfet = 1,
Antenna_Right = 2,
};
static VOID
_InitAntenna_Selection_8814A(IN PADAPTER Adapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
if(pHalData->AntDivCfg==0)
return;
/*
RTW_INFO("==> %s ....\n",__FUNCTION__);
rtw_write8(Adapter, REG_LEDCFG2, 0x82);
PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
if(PHY_QueryBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300) == MAIN_ANT)
pHalData->CurAntenna = MAIN_ANT;
else
pHalData->CurAntenna = AUX_ANT;
RTW_INFO("%s,Cur_ant:(%x)%s\n",__FUNCTION__,pHalData->CurAntenna,(pHalData->CurAntenna == MAIN_ANT)?"MAIN_ANT":"AUX_ANT");
*/
}
//
// 2010/08/26 MH Add for selective suspend mode check.
// If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and
// slim card.
//
static VOID
HalDetectSelectiveSuspendMode(
IN PADAPTER Adapter
)
{
#if 0
u8 tmpvalue;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(Adapter);
// If support HW radio detect, we need to enable WOL ability, otherwise, we
// can not use FW to notify host the power state switch.
EFUSE_ShadowRead(Adapter, 1, EEPROM_USB_OPTIONAL1, (u32 *)&tmpvalue);
DBG_8192C("HalDetectSelectiveSuspendMode(): SS ");
if(tmpvalue & BIT1)
{
DBG_8192C("Enable\n");
}
else
{
DBG_8192C("Disable\n");
pdvobjpriv->RegUsbSS = _FALSE;
}
// 2010/09/01 MH According to Dongle Selective Suspend INF. We can switch SS mode.
if (pdvobjpriv->RegUsbSS && !SUPPORT_HW_RADIO_DETECT(pHalData))
{
//PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
//if (!pMgntInfo->bRegDongleSS)
//{
// RT_TRACE(COMP_INIT, DBG_LOUD, ("Dongle disable SS\n"));
pdvobjpriv->RegUsbSS = _FALSE;
//}
}
#endif
} // HalDetectSelectiveSuspendMode
static rt_rf_power_state RfOnOffDetect(IN PADAPTER pAdapter )
{
rt_rf_power_state rfpowerstate = rf_on;
return rfpowerstate;
} // HalDetectPwrDownMode
static void _ps_open_RF(_adapter *padapter) {
//here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified
//phy_SsPwrSwitch92CU(padapter, rf_on, 1);
}
static void _ps_close_RF(_adapter *padapter){
//here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified
//phy_SsPwrSwitch92CU(padapter, rf_off, 1);
}
/* A lightweight deinit function */
static void rtl8814au_hw_reset(_adapter *Adapter)
{
#if 0
u8 reg_val=0;
if(rtw_read8(Adapter, REG_MCUFWDL)&BIT7)
{
_8051Reset8812(Adapter);
rtw_write8(Adapter, REG_MCUFWDL, 0x00);
//before BB reset should do clock gated
rtw_write32(Adapter, rFPGA0_XCD_RFPara,
rtw_read32(Adapter, rFPGA0_XCD_RFPara)|(BIT6));
//reset BB
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN);
reg_val &= ~(BIT(0) | BIT(1));
rtw_write8(Adapter, REG_SYS_FUNC_EN, reg_val);
//reset RF
rtw_write8(Adapter, REG_RF_CTRL, 0);
//reset TRX path
rtw_write16(Adapter, REG_CR, 0);
//reset MAC
reg_val = rtw_read8(Adapter, REG_APS_FSMCO+1);
reg_val |= BIT(1);
reg_val = rtw_write8(Adapter, REG_APS_FSMCO+1, reg_val); //reg0x5[1] ,auto FSM off
reg_val = rtw_read8(Adapter, REG_APS_FSMCO+1);
//check if reg0x5[1] auto cleared
while(reg_val & BIT(1)){
rtw_udelay_os(1);
reg_val = rtw_read8(Adapter, REG_APS_FSMCO+1);
}
reg_val |= BIT(0);
reg_val = rtw_write8(Adapter, REG_APS_FSMCO+1, reg_val); //reg0x5[0] ,auto FSM on
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
reg_val &= ~(BIT(4) | BIT(7));
rtw_write8(Adapter, REG_SYS_FUNC_EN+1, reg_val);
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
reg_val |= BIT(4) | BIT(7);
rtw_write8(Adapter, REG_SYS_FUNC_EN+1, reg_val);
}
#endif //0
}
u32 rtl8814au_hal_init(PADAPTER Adapter)
{
u8 value8 = 0, u1bRegCR;
u16 value16;
u8 txpktbuf_bndy;
u32 status = _SUCCESS;
u32 NavUpper = WiFiNavUpperUs;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
rt_rf_power_state eRfPowerStateToSet;
u32 init_start_time = rtw_get_current_time();
#ifdef DBG_HAL_INIT_PROFILING
enum HAL_INIT_STAGES {
HAL_INIT_STAGES_BEGIN = 0,
HAL_INIT_STAGES_INIT_PW_ON,
HAL_INIT_STAGES_INIT_LLTT,
HAL_INIT_STAGES_DOWNLOAD_FW,
HAL_INIT_STAGES_MAC,
HAL_INIT_STAGES_MISC01,
HAL_INIT_STAGES_MISC02,
HAL_INIT_STAGES_BB,
HAL_INIT_STAGES_RF,
HAL_INIT_STAGES_TURN_ON_BLOCK,
HAL_INIT_STAGES_INIT_SECURITY,
HAL_INIT_STAGES_MISC11,
HAL_INIT_STAGES_INIT_HAL_DM,
//HAL_INIT_STAGES_RF_PS,
HAL_INIT_STAGES_IQK,
HAL_INIT_STAGES_PW_TRACK,
HAL_INIT_STAGES_LCK,
HAL_INIT_STAGES_MISC21,
//HAL_INIT_STAGES_INIT_PABIAS,
#ifdef CONFIG_BT_COEXIST
HAL_INIT_STAGES_BT_COEXIST,
#endif
//HAL_INIT_STAGES_ANTENNA_SEL,
HAL_INIT_STAGES_MISC31,
HAL_INIT_STAGES_END,
HAL_INIT_STAGES_NUM
};
char * hal_init_stages_str[] = {
"HAL_INIT_STAGES_BEGIN",
"HAL_INIT_STAGES_INIT_PW_ON",
"HAL_INIT_STAGES_INIT_LLTT",
"HAL_INIT_STAGES_DOWNLOAD_FW",
"HAL_INIT_STAGES_MAC",
"HAL_INIT_STAGES_MISC01",
"HAL_INIT_STAGES_MISC02",
"HAL_INIT_STAGES_BB",
"HAL_INIT_STAGES_RF",
"HAL_INIT_STAGES_TURN_ON_BLOCK",
"HAL_INIT_STAGES_INIT_SECURITY",
"HAL_INIT_STAGES_MISC11",
"HAL_INIT_STAGES_INIT_HAL_DM",
//"HAL_INIT_STAGES_RF_PS",
"HAL_INIT_STAGES_IQK",
"HAL_INIT_STAGES_PW_TRACK",
"HAL_INIT_STAGES_LCK",
"HAL_INIT_STAGES_MISC21",
#ifdef CONFIG_BT_COEXIST
"HAL_INIT_STAGES_BT_COEXIST",
#endif
//"HAL_INIT_STAGES_ANTENNA_SEL",
"HAL_INIT_STAGES_MISC31",
"HAL_INIT_STAGES_END",
};
int hal_init_profiling_i;
u32 hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; //used to record the time of each stage's starting point
for(hal_init_profiling_i=0;hal_init_profiling_i<HAL_INIT_STAGES_NUM;hal_init_profiling_i++)
hal_init_stages_timestamp[hal_init_profiling_i]=0;
#define HAL_INIT_PROFILE_TAG(stage) hal_init_stages_timestamp[(stage)]=rtw_get_current_time();
#else //DBG_HAL_INIT_PROFILING
#define HAL_INIT_PROFILE_TAG(stage) do {} while(0)
#endif //DBG_HAL_INIT_PROFILING
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
if(pwrctrlpriv->bkeepfwalive)
{
_ps_open_RF(Adapter);
if(pHalData->bIQKInitialized){
//PHY_IQCalibrate_8812A(Adapter,_TRUE);
}
else
{
//PHY_IQCalibrate_8812A(Adapter,_FALSE);
//pHalData->bIQKInitialized = _TRUE;
}
//ODM_TXPowerTrackingCheck(&pHalData->odmpriv );
//PHY_LCCalibrate_8812A(Adapter);
goto exit;
}
// Check if MAC has already power on. by tynli. 2011.05.27.
value8 = rtw_read8(Adapter, REG_SYS_CLKR+1);
u1bRegCR = rtw_read8(Adapter, REG_CR);
RTW_INFO(" power-on :REG_SYS_CLKR 0x09=0x%02x. REG_CR 0x100=0x%02x.\n", value8, u1bRegCR);
if((value8&BIT3) && (u1bRegCR != 0 && u1bRegCR != 0xEA))
{
//pHalData->bMACFuncEnable = _TRUE;
RTW_INFO(" MAC has already power on.\n");
}
else
{
//pHalData->bMACFuncEnable = _FALSE;
// Set FwPSState to ALL_ON mode to prevent from the I/O be return because of 32k
// state which is set before sleep under wowlan mode. 2012.01.04. by tynli.
//pHalData->FwPSState = FW_PS_STATE_ALL_ON_88E;
RTW_INFO(" MAC has not been powered on yet.\n");
}
//
// 2012/11/13 MH Revise for U2/U3 switch we can not update RF-A/B reset.
// After discuss with BB team YN, reset after MAC power on to prevent RF
// R/W error. Is it a right method?
//
/*if(!IS_HARDWARE_TYPE_8821(Adapter))
{
rtw_write8(Adapter, REG_RF_CTRL, 5);
rtw_write8(Adapter, REG_RF_CTRL, 7);
rtw_write8(Adapter, REG_RF_B_CTRL_8812, 5);
rtw_write8(Adapter, REG_RF_B_CTRL_8812, 7);
}*/
/*
If HW didn't go through a complete de-initial procedure,
it probably occurs some problem for double initial procedure.
Like "CONFIG_DEINIT_BEFORE_INIT" in 92du chip
*/
rtl8814au_hw_reset(Adapter); //todo
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
status = _InitPowerOn_8814AU(Adapter);
if(status == _FAIL){
RTW_INFO("Failed to init power on!\n");
goto exit;
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
status = InitLLTTable8814A(Adapter);
if(status == _FAIL){
RTW_INFO("Failed to init LLT table\n");
goto exit;
}
_InitHardwareDropIncorrectBulkOut_8814A(Adapter);
/*if(pHalData->bRDGEnable){
_InitRDGSetting_8812A(Adapter);
}*/
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW);
if (Adapter->registrypriv.mp_mode == 0) {
status = FirmwareDownload8814A(Adapter, _FALSE);
if (status != _SUCCESS) {
RTW_INFO("%s: Download Firmware failed!!\n", __FUNCTION__);
GET_HAL_DATA(Adapter)->bFWReady = _FALSE;
pHalData->fw_ractrl = _FALSE;
//return status;
} else {
RTW_INFO("%s: Download Firmware Success!!\n",__FUNCTION__);
GET_HAL_DATA(Adapter)->bFWReady = _TRUE;
pHalData->fw_ractrl = _TRUE;
}
}
InitializeFirmwareVars8814(Adapter);
if(pwrctrlpriv->reg_rfoff == _TRUE){
pwrctrlpriv->rf_pwrstate = rf_off;
}
// 2010/08/09 MH We need to check if we need to turnon or off RF after detecting
// HW GPIO pin. Before PHY_RFConfig8192C.
//HalDetectPwrDownMode(Adapter);
// 2010/08/26 MH If Efuse does not support sective suspend then disable the function.
//HalDetectSelectiveSuspendMode(Adapter);
// Save target channel
// <Roger_Notes> Current Channel will be updated again later.
pHalData->current_channel = 0;//set 0 to trigger switch correct channel
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC);
#if (HAL_MAC_ENABLE == 1)
status = PHY_MACConfig8814(Adapter);
if(status == _FAIL)
{
goto exit;
}
#endif //HAL_MAC_ENABLE
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01);
_InitQueuePriority_8814AUsb(Adapter);
_InitPageBoundary_8814AUsb(Adapter);
_InitTransferPageSize_8814AUsb(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
// Get Rx PHY status in order to report RSSI and others.
_InitDriverInfoSize_8814A(Adapter, DRVINFO_SZ);
_InitInterrupt_8814AU(Adapter);
_InitID_8814A(Adapter);//set mac_address
_InitNetworkType_8814A(Adapter);//set msr
_InitMacConfigure_8814A(Adapter);
//_InitWMACSetting_8814A(Adapter);
//_InitAdaptiveCtrl_8814AUsb(Adapter);
_InitEDCA_8814AUsb(Adapter);
_InitRetryFunction_8814A(Adapter);
init_UsbAggregationSetting_8814A(Adapter);
//_InitOperationMode_8814A(Adapter);//todo
_InitBeaconParameters_8814A(Adapter);
_InitBeaconMaxError_8814A(Adapter, _TRUE);
_InitBurstPktLen(Adapter); //added by page. 20110919
//
// Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch
// Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E.
// 2011.08.05. by tynli.
//
value8 = rtw_read8(Adapter, REG_CR);
rtw_write8(Adapter, REG_CR, (value8|MACTXEN|MACRXEN));
#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_TX_MCAST2UNI)
#ifdef CONFIG_CHECK_AC_LIFETIME
// Enable lifetime check for the four ACs
rtw_write8(Adapter, REG_LIFETIME_CTRL, 0x0F);
#endif // CONFIG_CHECK_AC_LIFETIME
#ifdef CONFIG_TX_MCAST2UNI
rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); // unit: 256us. 256ms
rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); // unit: 256us. 256ms
#else // CONFIG_TX_MCAST2UNI
rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x3000); // unit: 256us. 3s
rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x3000); // unit: 256us. 3s
#endif // CONFIG_TX_MCAST2UNI
#endif // CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI
#ifdef CONFIG_RTW_LED
_InitHWLed(Adapter);
#endif //CONFIG_LED
//
//d. Initialize BB related configurations.
//
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB);
#if (HAL_BB_ENABLE == 1)
status = PHY_BBConfig8814(Adapter);
if(status == _FAIL)
{
goto exit;
}
#endif //HAL_BB_ENABLE
// 92CU use 3-wire to r/w RF
//pHalData->Rf_Mode = RF_OP_By_SW_3wire;
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF);
#if (HAL_RF_ENABLE == 1)
status = PHY_RFConfig8814A(Adapter);
if(status == _FAIL)
{
goto exit;
}
//todo:
//if(pHalData->rf_type == RF_1T1R && IS_HARDWARE_TYPE_8812AU(Adapter))
//PHY_BB8812_Config_1T(Adapter);
#endif
PHY_ConfigBB_8814A(Adapter);
if(Adapter->registrypriv.channel <= 14)
PHY_SwitchWirelessBand8814A(Adapter, BAND_ON_2_4G);
else
PHY_SwitchWirelessBand8814A(Adapter, BAND_ON_5G);
rtw_hal_set_chnl_bw(Adapter, Adapter->registrypriv.channel,
CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY);
invalidate_cam_all(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);
_InitAntenna_Selection_8814A(Adapter);
// HW SEQ CTRL
//set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM.
rtw_write8(Adapter,REG_HWSEQ_CTRL, 0xFF);
//
// Disable BAR, suggested by Scott
// 2010.04.09 add by hpfan
//
rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff);
rtw_write8(Adapter,REG_SECONDARY_CCA_CTRL_8814A,0x03);
if(pregistrypriv->wifi_spec)
rtw_write16(Adapter,REG_FAST_EDCA_CTRL ,0);
//adjust EDCCA to avoid collision
/*if(pregistrypriv->wifi_spec)
{
rtw_write16(Adapter, rEDCCA_Jaguar, 0xfe01);
}*/
//Nav limit , suggest by scott
rtw_write8(Adapter, 0x652, 0x0);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
rtl8814_InitHalDm(Adapter);
//
// 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status
// and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not
// call init_adapter. May cause some problem??
//
// Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed
// in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState
// is the same as eRfOff, we should change it to eRfOn after we config RF parameters.
// Added by tynli. 2010.03.30.
pwrctrlpriv->rf_pwrstate = rf_on;
PHY_IQCalibrate_8814A_Init(&pHalData->odmpriv);
#if (HAL_BB_ENABLE == 1)
PHY_SetRFEReg8814A(Adapter, _TRUE, pHalData->current_band_type);
#endif //HAL_BB_ENABLE
//0x4c6[3] 1: RTS BW = Data BW
//0: RTS BW depends on CCA / secondary CCA result.
rtw_write8(Adapter, REG_QUEUE_CTRL, rtw_read8(Adapter, REG_QUEUE_CTRL)&0xF7);
rtw_hal_set_hwreg(Adapter, HW_VAR_NAV_UPPER, ((u8 *)&NavUpper));
// enable Tx report.
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+1, 0x0F);
// Suggested by SD1 pisa. Added by tynli. 2011.10.21.
//rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8812+3, 0x01);//Pretx_en, for WEP/TKIP SEC
//tynli_test_tx_report.
//rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);
// Reset USB mode switch setting
rtw_write8(Adapter, REG_SDIO_CTRL_8814A, 0x0);
rtw_write8(Adapter, REG_ACLK_MON, 0x0);
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
//RT_TRACE(COMP_INIT, DBG_TRACE, ("InitializeAdapter8188EUsb() <====\n"));
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK);
// 2010/08/26 MH Merge from 8192CE.
if(pwrctrlpriv->rf_pwrstate == rf_on)
{
/* if(IS_HARDWARE_TYPE_8812AU(Adapter))
{
#if (RTL8812A_SUPPORT == 1)
pHalData->bNeedIQK = _TRUE;
if(pHalData->bIQKInitialized)
PHY_IQCalibrate_8812A(Adapter, _TRUE);
else
{
PHY_IQCalibrate_8812A(Adapter, _FALSE);
pHalData->bIQKInitialized = _TRUE;
}
#endif
}*/
//this should be done by rf team using phydm code
//PHY_IQCalibrate_8814A(&pHalData->odmpriv, _FALSE);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK);
//ODM_TXPowerTrackingCheck(&pHalData->odmpriv );
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
//PHY_LCCalibrate_8812A(Adapter);
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21);
//HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS);
// _InitPABias(Adapter);
#if (MP_DRIVER == 1)
if (Adapter->registrypriv.mp_mode == 1)
{
Adapter->mppriv.channel = pHalData->current_channel;
MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel);
}
#endif //#if (MP_DRIVER == 1)
#ifdef CONFIG_BT_COEXIST
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BT_COEXIST);
//_InitBTCoexist(Adapter);
// 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW enter
// suspend mode automatically.
//HwSuspendModeEnable92Cu(Adapter, _FALSE);
if ( _TRUE == pHalData->EEPROMBluetoothCoexist)
{
// Init BT hw config.
rtw_btcoex_HAL_Initialize(Adapter, _FALSE);
}
else
{
// In combo card run wifi only , must setting some hardware reg.
rtl8812a_combo_card_WifiOnlyHwInit(Adapter);
}
#endif //CONFIG_BT_COEXIST
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC31);
//rtw_write8(Adapter, REG_USB_HRPWM, 0);
#ifdef CONFIG_XMIT_ACK
//ack for xmit mgmt frames.
rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12));
#endif //CONFIG_XMIT_ACK
//misc
{
int i;
u8 mac_addr[6];
for(i=0; i<6; i++)
{
#ifdef CONFIG_CONCURRENT_MODE
if(Adapter->iface_type == IFACE_PORT1)
mac_addr[i] = rtw_read8(Adapter, REG_MACID1+i);
else
#endif
mac_addr[i] = rtw_read8(Adapter, REG_MACID+i);
}
RTW_INFO("MAC Address from REG_MACID = "MAC_FMT"\n", MAC_ARG(mac_addr));
}
exit:
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
RTW_INFO("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time));
#ifdef DBG_HAL_INIT_PROFILING
hal_init_stages_timestamp[HAL_INIT_STAGES_END]=rtw_get_current_time();
for(hal_init_profiling_i=0;hal_init_profiling_i<HAL_INIT_STAGES_NUM-1;hal_init_profiling_i++) {
RTW_INFO("DBG_HAL_INIT_PROFILING: %35s, %u, %5u, %5u\n"
, hal_init_stages_str[hal_init_profiling_i]
, hal_init_stages_timestamp[hal_init_profiling_i]
, (hal_init_stages_timestamp[hal_init_profiling_i+1]-hal_init_stages_timestamp[hal_init_profiling_i])
, rtw_get_time_interval_ms(hal_init_stages_timestamp[hal_init_profiling_i], hal_init_stages_timestamp[hal_init_profiling_i+1])
);
}
#endif
return status;
}
VOID
hal_carddisable_8814(
IN PADAPTER Adapter
)
{
u8 u1bTmp;
RTW_INFO("CardDisableRTL8814AU\n");
// stop rx
rtw_write8(Adapter, REG_CR_8814A, 0x0);
// Card disable power action flow
Fixed build/compile error + some compiler warnings + minor cleanup
2019-11-11 00:04:53 +00:00
HalPwrSeqCmdParsing(Adapter, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8814A_NIC_DISABLE_FLOW);
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
GET_HAL_DATA(Adapter)->bFWReady = _FALSE;
}
static void rtl8814au_hw_power_down(_adapter *padapter)
{
// 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c.
// Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1.
// Enable register area 0x0-0xc.
rtw_write8(padapter,REG_RSV_CTRL, 0x0);
rtw_write16(padapter, REG_APS_FSMCO, 0x8812);
}
u32 rtl8814au_hal_deinit(PADAPTER Adapter)
{
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter);
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
RTW_INFO("==> %s \n",__FUNCTION__);
#ifdef CONFIG_BT_COEXIST
if (hal_btcoex_IsBtExist(Adapter))
{
RTW_INFO("BT module enable SIC\n");
// Only under WIN7 we can support selective suspend and enter D3 state when system call halt adapter.
//rtw_write16(Adapter, REG_GPIO_MUXCFG, rtw_read16(Adapter, REG_GPIO_MUXCFG)|BIT12);
// 2010/10/13 MH If we enable SIC in the position and then call _ResetDigitalProcedure1. in XP,
// the system will hang due to 8051 reset fail.
}
else
#endif //CONFIG_BT_COEXIST
{
rtw_write16(Adapter, REG_GPIO_MUXCFG, rtw_read16(Adapter, REG_GPIO_MUXCFG)&(~BIT12));
}
if(pHalData->bSupportUSB3 == _TRUE)
{
// set Reg 0xf008[3:4] to 2'11 to eable U1/U2 Mode in USB3.0. added by page, 20120712
rtw_write8(Adapter, 0xf008, rtw_read8(Adapter, 0xf008)|0x18);
}
rtw_write32(Adapter, REG_HISR, 0xFFFFFFFF);
rtw_write32(Adapter, REG_HISRE, 0xFFFFFFFF);
rtw_write32(Adapter, REG_HIMR, 0);
rtw_write32(Adapter, REG_HIMRE, 0);
#ifdef SUPPORT_HW_RFOFF_DETECTED
RTW_INFO("bkeepfwalive(%x)\n", pwrctl->bkeepfwalive);
if(pwrctl->bkeepfwalive)
{
_ps_close_RF(Adapter);
if((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown))
rtl8814au_hw_power_down(Adapter);
}
else
#endif
{
if (rtw_is_hw_init_completed(Adapter)) {
hal_carddisable_8814(Adapter);
if((pwrctl->bHWPwrPindetect ) && (pwrctl->bHWPowerdown))
rtl8814au_hw_power_down(Adapter);
}
}
return _SUCCESS;
}
unsigned int rtl8814au_inirp_init(PADAPTER Adapter)
{
u8 i;
struct recv_buf *precvbuf;
uint status;
struct dvobj_priv *pdev= adapter_to_dvobj(Adapter);
struct intf_hdl * pintfhdl=&Adapter->iopriv.intf;
struct recv_priv *precvpriv = &(Adapter->recvpriv);
u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
#endif
_read_port = pintfhdl->io_ops._read_port;
status = _SUCCESS;
RTW_INFO("===> usb_inirp_init \n");
precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;
//issue Rx irp to receive data
precvbuf = (struct recv_buf *)precvpriv->precv_buf;
for(i=0; i<NR_RECVBUFF; i++)
{
if(_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE )
{
RTW_ERR("usb_rx_init: usb_read_port error \n");
status = _FAIL;
goto exit;
}
precvbuf++;
precvpriv->free_recv_buf_queue_cnt--;
}
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
if (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] != 0x05) {
status = _FAIL;
RTW_INFO("%s =>Warning !! Have not USB Int-IN pipe, RtIntInPipe(%d)!!!\n", __func__, pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX]);
goto exit;
}
_read_interrupt = pintfhdl->io_ops._read_interrupt;
if(_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE )
{
RTW_ERR("usb_rx_init: usb_read_interrupt error \n");
status = _FAIL;
}
#endif
exit:
RTW_INFO("<=== usb_inirp_init \n");
return status;
}
unsigned int rtl8814au_inirp_deinit(PADAPTER Adapter)
{
RTW_INFO("\n ===> usb_rx_deinit \n");
rtw_read_port_cancel(Adapter);
RTW_INFO("\n <=== usb_rx_deinit \n");
return _SUCCESS;
}
//-------------------------------------------------------------------
//
// EEPROM/EFUSE Content Parsing
//
//-------------------------------------------------------------------
VOID
hal_ReadIDs_8814AU(
IN PADAPTER Adapter,
IN pu1Byte PROMContent,
IN BOOLEAN AutoloadFail
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
if( !AutoloadFail )
{
pHalData->EEPROMVID = EF2Byte( *(pu2Byte)&PROMContent[EEPROM_VID_8814AU] );
pHalData->EEPROMPID = EF2Byte( *(pu2Byte)&PROMContent[EEPROM_PID_8814AU] );
// Customer ID, 0x00 and 0xff are reserved for Realtek.
pHalData->EEPROMCustomerID = *(pu1Byte)&PROMContent[EEPROM_CustomID_8814];
pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
}
else
{
pHalData->EEPROMVID = EEPROM_Default_VID;
pHalData->EEPROMPID = EEPROM_Default_PID;
// Customer ID, 0x00 and 0xff are reserved for Realtek.
pHalData->EEPROMCustomerID = EEPROM_Default_CustomerID;
pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
}
RTW_INFO("VID = 0x%04X, PID = 0x%04X\n", pHalData->EEPROMVID, pHalData->EEPROMPID);
RTW_INFO("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", pHalData->EEPROMCustomerID, pHalData->EEPROMSubCustomerID);
}
VOID
hal_InitPGData_8814A(
IN PADAPTER padapter,
IN OUT u8* PROMContent
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
u32 i;
u16 value16;
if(_FALSE == pHalData->bautoload_fail_flag)
{ // autoload OK.
// hal_ReadeFuse_8814A is FW offload read efuse, todo
//#if ((DEV_BUS_TYPE==RT_USB_INTERFACE || DEV_BUS_TYPE==RT_SDIO_INTERFACE)) && (MP_DRIVER != 1)
//if(hal_ReadeFuse_8814A(pAdapter) == _FAIL)
//#endif
// Read EFUSE real map to shadow.
EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, _FALSE);
}
else
{//autoload fail
RTW_INFO("AutoLoad Fail reported from CR9346!!\n");
//update to default value 0xFF
EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, _FALSE);
}
#ifdef CONFIG_EFUSE_CONFIG_FILE
if (check_phy_efuse_tx_power_info_valid(padapter) == _FALSE) {
if (Hal_readPGDataFromConfigFile(padapter) != _SUCCESS)
RTW_ERR("invalid phy efuse and read from file fail, will use driver default!!\n");
}
#endif
}
VOID
hal_CustomizedBehavior_8814AU(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct led_priv *pledpriv = adapter_to_led(Adapter);
// Led mode
switch(pHalData->CustomerID)
{
case RT_CID_DEFAULT:
pledpriv->LedStrategy = SW_LED_MODE9;
#ifdef CONFIG_RTW_SW_LED
pledpriv->bRegUseLed = _TRUE;
#endif
break;
default:
pledpriv->LedStrategy = SW_LED_MODE9;
break;
}
}
static void
hal_CustomizeByCustomerID_8814AU(
IN PADAPTER pAdapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
RTW_INFO("PID= 0x%x, VID= %x\n",pHalData->EEPROMPID,pHalData->EEPROMVID);
// Decide CustomerID according to VID/DID or EEPROM
switch(pHalData->EEPROMCustomerID)
{
case EEPROM_CID_DEFAULT:
if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308))
pHalData->CustomerID = RT_CID_DLINK;
else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309))
pHalData->CustomerID = RT_CID_DLINK;
else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a))
pHalData->CustomerID = RT_CID_DLINK;
else if((pHalData->EEPROMVID == 0x0BFF) && (pHalData->EEPROMPID == 0x8160))
{
pHalData->CustomerID = RT_CID_CHINA_MOBILE;
}
else if((pHalData->EEPROMVID == 0x0BDA) && (pHalData->EEPROMPID == 0x5088))
pHalData->CustomerID = RT_CID_CC_C;
break;
case EEPROM_CID_WHQL:
//padapter->bInHctTest = _TRUE;
//pMgntInfo->bSupportTurboMode = _FALSE;
//pMgntInfo->bAutoTurboBy8186 = _FALSE;
//pMgntInfo->PowerSaveControl.bInactivePs = _FALSE;
//pMgntInfo->PowerSaveControl.bIPSModeBackup = _FALSE;
//pMgntInfo->PowerSaveControl.bLeisurePs = _FALSE;
//pMgntInfo->PowerSaveControl.bLeisurePsModeBackup = _FALSE;
//pMgntInfo->keepAliveLevel = 0;
//padapter->bUnloadDriverwhenS3S4 = _FALSE;
break;
default:
pHalData->CustomerID = RT_CID_DEFAULT;
break;
}
RTW_INFO("Customer ID: 0x%2x\n", pHalData->CustomerID);
hal_CustomizedBehavior_8814AU(pAdapter);
}
VOID
hal_ReadUsbModeSwitch_8814AU(
IN PADAPTER Adapter,
IN u8* PROMContent,
IN BOOLEAN AutoloadFail
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
if (AutoloadFail)
pHalData->EEPROMUsbSwitch = _FALSE;
else
/* check efuse 0x0E bit2 */
pHalData->EEPROMUsbSwitch = (PROMContent[EEPROM_USB_MODE_8814A] & BIT1) >> 1;
}
static VOID
ReadLEDSetting_8814AU(
IN PADAPTER Adapter,
IN u8* PROMContent,
IN BOOLEAN AutoloadFail
)
{
struct led_priv *pledpriv = adapter_to_led(Adapter);
#ifdef CONFIG_RTW_SW_LED
pledpriv->bRegUseLed = _TRUE;
#else // HW LED
pledpriv->LedStrategy = HW_LED;
#endif //CONFIG_RTW_LED
}
VOID
InitAdapterVariablesByPROM_8814AU(
IN PADAPTER Adapter
)
{
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
hal_InitPGData_8814A(Adapter, pHalData->efuse_eeprom_data);
//Hal_EfuseParseIDCode8812A(Adapter, pHalData->efuse_eeprom_data);
hal_ReadPROMVersion8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadIDs_8814AU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_config_macaddr(Adapter, pHalData->bautoload_fail_flag);
hal_ReadTxPowerInfo8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadBoardType8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_Read_TRX_antenna_8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
//
// Read Bluetooth co-exist and initialize
//
hal_EfuseParseBTCoexistInfo8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
hal_ReadChannelPlan8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_EfuseParseXtal_8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadThermalMeter_8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadRemoteWakeup_8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadAntennaDiversity8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadRFEType_8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
ReadLEDSetting_8814AU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadUsbModeSwitch_8814AU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_CustomizeByCustomerID_8814AU(Adapter);
hal_GetRxGainOffset_8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_EfuseParseKFreeData_8814A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
}
static void hal_ReadPROMContent_8814A(
IN PADAPTER Adapter
)
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
{
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
u8 eeValue;
/* check system boot selection */
eeValue = rtw_read8(Adapter, REG_9346CR);
pHalData->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? _TRUE : _FALSE;
pHalData->bautoload_fail_flag = (eeValue & EEPROM_EN) ? _FALSE : _TRUE;
RTW_INFO("Boot from %s, Autoload %s !\n", (pHalData->EepromOrEfuse ? "EEPROM" : "EFUSE"),
(pHalData->bautoload_fail_flag ? "Fail" : "OK") );
//pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE;
InitAdapterVariablesByPROM_8814AU(Adapter);
}
u8
ReadAdapterInfo8814AU(
IN PADAPTER Adapter
)
{
Hal_InitEfuseVars_8814A(Adapter);
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
/* Read all content in Efuse/EEPROM. */
hal_ReadPROMContent_8814A(Adapter);
/* We need to define the RF type after all PROM value is recognized. */
ReadRFType8814A(Adapter);
return _SUCCESS;
}
void UpdateInterruptMask8814AU(PADAPTER padapter,u8 bHIMR0 ,u32 AddMSR, u32 RemoveMSR)
{
HAL_DATA_TYPE *pHalData;
u32 *himr;
pHalData = GET_HAL_DATA(padapter);
if(bHIMR0)
himr = &(pHalData->IntrMask[0]);
else
himr = &(pHalData->IntrMask[1]);
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
if (AddMSR)
*himr |= AddMSR;
if (RemoveMSR)
*himr &= (~RemoveMSR);
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
if(bHIMR0)
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
rtw_write32(padapter, REG_HIMR0_8814A, *himr);
else
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
rtw_write32(padapter, REG_HIMR1_8814A, *himr);
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
}
u8 SetHwReg8814AU(PADAPTER Adapter, u8 variable, u8* val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter);
struct registry_priv *registry_par = &Adapter->registrypriv;
u8 ret = _SUCCESS;
switch (variable) {
case HW_VAR_RXDMA_AGG_PG_TH:
#ifdef CONFIG_USB_RX_AGGREGATION
{
/*u8 threshold = *((u8 *)val);
if( threshold == 0)
{
threshold = pHalData->UsbRxAggPageCount;
}
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);*/
}
#endif
break;
case HW_VAR_SET_RPWM:
#ifdef CONFIG_LPS_LCLK
{
u8 ps_state = *((u8 *)val);
/*rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e.
BIT0 value - 1: 32k, 0:40MHz.
BIT6 value - 1: report cpwm value after success set, 0:do not report.
BIT7 value - Toggle bit change.
modify by Thomas. 2012/4/2.*/
ps_state = ps_state & 0xC1;
/*RTW_INFO("##### Change RPWM value to = %x for switch clk #####\n", ps_state);*/
rtw_write8(Adapter, REG_USB_HRPWM, ps_state);
}
#endif
#ifdef CONFIG_AP_WOWLAN
if (pwrctl->wowlan_ap_mode == _TRUE) {
u8 ps_state = *((u8 *)val);
RTW_INFO("%s, RPWM\n", __func__);
ps_state = ps_state & 0xC1;
rtw_write8(Adapter, REG_USB_HRPWM, ps_state);
}
#endif
break;
case HW_VAR_USB_MODE:
/* U2 to U3 */
if (registry_par->switch_usb_mode == 1) {
if (IS_HIGH_SPEED_USB(Adapter)) {
if ((rtw_read8(Adapter, 0x74) & (BIT(2) | BIT(3))) != BIT(3)) {
rtw_write8(Adapter, 0x74, 0x8);
rtw_write8(Adapter, 0x70, 0x2);
rtw_write8(Adapter, 0x3e, 0x1);
rtw_write8(Adapter, 0x3d, 0x3);
/* usb disconnect */
rtw_write8(Adapter, 0x5, 0x80);
*val = _TRUE;
}
} else if (IS_SUPER_SPEED_USB(Adapter)) {
rtw_write8(Adapter, 0x70, rtw_read8(Adapter, 0x70) & (~BIT(1)));
rtw_write8(Adapter, 0x3e, rtw_read8(Adapter, 0x3e) & (~BIT(0)));
}
} else if (registry_par->switch_usb_mode == 2) {
/* U3 to U2 */
if (IS_SUPER_SPEED_USB(Adapter)) {
if ((rtw_read8(Adapter, 0x74) & (BIT(2) | BIT(3))) != BIT(2)) {
rtw_write8(Adapter, 0x74, 0x4);
rtw_write8(Adapter, 0x70, 0x2);
rtw_write8(Adapter, 0x3e, 0x1);
rtw_write8(Adapter, 0x3d, 0x3);
/* usb disconnect */
rtw_write8(Adapter, 0x5, 0x80);
*val = _TRUE;
}
} else if (IS_HIGH_SPEED_USB(Adapter)) {
rtw_write8(Adapter, 0x70, rtw_read8(Adapter, 0x70) & (~BIT(1)));
rtw_write8(Adapter, 0x3e, rtw_read8(Adapter, 0x3e) & (~BIT(0)));
}
}
break;
default:
ret = SetHwReg8814A(Adapter, variable, val);
break;
}
return ret;
}
void GetHwReg8814AU(PADAPTER Adapter, u8 variable, u8* val)
{
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
switch(variable)
{
default:
GetHwReg8814A(Adapter,variable,val);
break;
}
}
//
// Description:
// Change default setting of specified variable.
//
u8
SetHalDefVar8814AUsb(
IN PADAPTER Adapter,
IN HAL_DEF_VARIABLE eVariable,
IN PVOID pValue
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 bResult = _SUCCESS;
switch(eVariable)
{
default:
SetHalDefVar8814A(Adapter,eVariable,pValue);
break;
}
return bResult;
}
//
// Description:
// Query setting of specified variable.
//
u8
GetHalDefVar8814AUsb(
IN PADAPTER Adapter,
IN HAL_DEF_VARIABLE eVariable,
IN PVOID pValue
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 bResult = _SUCCESS;
switch(eVariable)
{
default:
GetHalDefVar8814A(Adapter,eVariable,pValue);
break;
}
return bResult;
}
static void rtl8814au_init_default_value(_adapter * padapter)
{
PHAL_DATA_TYPE pHalData;
pHalData = GET_HAL_DATA(padapter);
InitDefaultValue8814A(padapter);
pHalData->IntrMask[0] = (u32)( \
//IMR_ROK |
//IMR_RDU |
//IMR_VODOK |
//IMR_VIDOK |
//IMR_BEDOK |
//IMR_BKDOK |
//IMR_MGNTDOK |
//IMR_HIGHDOK |
//IMR_CPWM |
//IMR_CPWM2 |
//IMR_C2HCMD |
//IMR_HISR1_IND_INT |
//IMR_ATIMEND |
//IMR_BCNDMAINT_E |
//IMR_HSISR_IND_ON_INT |
//IMR_BCNDOK0 |
//IMR_BCNDMAINT0 |
//IMR_TSF_BIT32_TOGGLE |
//IMR_TXBCN0OK |
//IMR_TXBCN0ERR |
//IMR_GTINT3 |
//IMR_GTINT4 |
//IMR_TXCCK |
0);
pHalData->IntrMask[1] = (u32)(\
//IMR_RXFOVW |
//IMR_TXFOVW |
//IMR_RXERR |
//IMR_TXERR |
//IMR_ATIMEND_E |
//IMR_BCNDOK1 |
//IMR_BCNDOK2 |
//IMR_BCNDOK3 |
//IMR_BCNDOK4 |
//IMR_BCNDOK5 |
//IMR_BCNDOK6 |
//IMR_BCNDOK7 |
//IMR_BCNDMAINT1 |
//IMR_BCNDMAINT2 |
//IMR_BCNDMAINT3 |
//IMR_BCNDMAINT4 |
//IMR_BCNDMAINT5 |
//IMR_BCNDMAINT6 |
//IMR_BCNDMAINT7 |
0);
}
static u8 rtl8814au_ps_func(PADAPTER Adapter,HAL_INTF_PS_FUNC efunc_id, u8 *val)
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
{
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
u8 bResult = _TRUE;
switch(efunc_id){
#if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED)
case HAL_USB_SELECT_SUSPEND:
{
u8 bfwpoll = *(( u8*)val);
//rtl8188e_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500);//note fw to support hw power down ping detect
}
break;
#endif //CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED
default:
break;
}
return bResult;
}
void rtl8814au_set_hal_ops(_adapter * padapter)
{
struct hal_ops *pHalFunc = &padapter->hal_func;
pHalFunc->hal_power_on = _InitPowerOn_8814AU;
pHalFunc->hal_power_off = hal_carddisable_8814;
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
pHalFunc->hal_init = &rtl8814au_hal_init;
pHalFunc->hal_deinit = &rtl8814au_hal_deinit;
pHalFunc->inirp_init = &rtl8814au_inirp_init;
pHalFunc->inirp_deinit = &rtl8814au_inirp_deinit;
pHalFunc->init_xmit_priv = &rtl8814au_init_xmit_priv;
pHalFunc->free_xmit_priv = &rtl8814au_free_xmit_priv;
pHalFunc->init_recv_priv = &rtl8814au_init_recv_priv;
pHalFunc->free_recv_priv = &rtl8814au_free_recv_priv;
#ifdef CONFIG_RTW_SW_LED
pHalFunc->InitSwLeds = &rtl8814au_InitSwLeds;
pHalFunc->DeInitSwLeds = &rtl8814au_DeInitSwLeds;
//#else //case of hw led or no led
// pHalFunc->InitSwLeds = NULL;
// pHalFunc->DeInitSwLeds = NULL;
#endif//CONFIG_RTW_LED
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
pHalFunc->init_default_value = &rtl8814au_init_default_value;
pHalFunc->intf_chip_configure = &rtl8814au_interface_configure;
pHalFunc->read_adapter_info = &ReadAdapterInfo8814AU;
Some cleanup of unused chips
2023-05-26 04:36:51 +00:00
Add a bunch of VID/PID's + Add 8814/8821AU support
2019-11-09 18:53:04 +00:00
pHalFunc->set_hw_reg_handler = &SetHwReg8814AU;
pHalFunc->GetHwRegHandler = &GetHwReg8814AU;
pHalFunc->get_hal_def_var_handler = &GetHalDefVar8814AUsb;
pHalFunc->SetHalDefVarHandler = &SetHalDefVar8814AUsb;
pHalFunc->hal_xmit = &rtl8814au_hal_xmit;
pHalFunc->mgnt_xmit = &rtl8814au_mgnt_xmit;
pHalFunc->hal_xmitframe_enqueue = &rtl8814au_hal_xmitframe_enqueue;
#ifdef CONFIG_HOSTAPD_MLME
pHalFunc->hostap_mgnt_xmit_entry = &rtl8812au_hostap_mgnt_xmit_entry;
#endif
pHalFunc->interface_ps_func = &rtl8814au_ps_func;
#ifdef CONFIG_XMIT_THREAD_MODE
pHalFunc->xmit_thread_handler = &rtl8812au_xmit_buf_handler;
#endif
#ifdef CONFIG_SUPPORT_USB_INT
pHalFunc->interrupt_handler = interrupt_handler_8814au;
#endif
pHalFunc->fw_correct_bcn = &rtl8814_fw_update_beacon_cmd;
rtl8814_set_hal_ops(pHalFunc);
}
Copy Permalink