1
0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2024-11-29 08:27:41 +00:00
rtl8812au/hal/phydm/phydm_debug.h

331 lines
9.2 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __ODM_DBG_H__
#define __ODM_DBG_H__
#define DEBUG_VERSION "1.0" /*2015.01.13 Dino*/
//-----------------------------------------------------------------------------
// Define the debug levels
//
// 1. DBG_TRACE and DBG_LOUD are used for normal cases.
// So that, they can help SW engineer to develope or trace states changed
// and also help HW enginner to trace every operation to and from HW,
// e.g IO, Tx, Rx.
//
// 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases,
// which help us to debug SW or HW.
//
//-----------------------------------------------------------------------------
//
// Never used in a call to ODM_RT_TRACE()!
//
#define ODM_DBG_OFF 1
//
// Fatal bug.
// For example, Tx/Rx/IO locked up, OS hangs, memory access violation,
// resource allocation failed, unexpected HW behavior, HW BUG and so on.
//
#define ODM_DBG_SERIOUS 2
//
// Abnormal, rare, or unexpeted cases.
// For example, IRP/Packet/OID canceled, device suprisely unremoved and so on.
//
#define ODM_DBG_WARNING 3
//
// Normal case with useful information about current SW or HW state.
// For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status,
// SW protocol state change, dynamic mechanism state change and so on.
//
#define ODM_DBG_LOUD 4
//
// Normal case with detail execution flow or information.
//
#define ODM_DBG_TRACE 5
/*FW DBG MSG*/
#define RATE_DECISION BIT0
#define INIT_RA_TABLE BIT1
#define RATE_UP BIT2
#define RATE_DOWN BIT3
#define TRY_DONE BIT4
#define F_RATE_AP_RPT BIT7
//-----------------------------------------------------------------------------
// Define the tracing components
//
//-----------------------------------------------------------------------------
//BB Functions
#define ODM_COMP_DIG BIT0
#define ODM_COMP_RA_MASK BIT1
#define ODM_COMP_DYNAMIC_TXPWR BIT2
#define ODM_COMP_FA_CNT BIT3
#define ODM_COMP_RSSI_MONITOR BIT4
#define ODM_COMP_CCK_PD BIT5
#define ODM_COMP_ANT_DIV BIT6
#define ODM_COMP_PWR_SAVE BIT7
#define ODM_COMP_PWR_TRAIN BIT8
#define ODM_COMP_RATE_ADAPTIVE BIT9
#define ODM_COMP_PATH_DIV BIT10
#define ODM_COMP_PSD BIT11
#define ODM_COMP_DYNAMIC_PRICCA BIT12
#define ODM_COMP_RXHP BIT13
#define ODM_COMP_MP BIT14
#define ODM_COMP_CFO_TRACKING BIT15
#define ODM_COMP_ACS BIT16
#define PHYDM_COMP_ADAPTIVITY BIT17
#define PHYDM_COMP_RA_DBG BIT18
#define PHYDM_COMP_TXBF BIT19
//MAC Functions
#define ODM_COMP_EDCA_TURBO BIT20
#define ODM_COMP_EARLY_MODE BIT21
#define ODM_FW_DEBUG_TRACE BIT22
//RF Functions
#define ODM_COMP_TX_PWR_TRACK BIT24
#define ODM_COMP_RX_GAIN_TRACK BIT25
#define ODM_COMP_CALIBRATION BIT26
//Common Functions
#define ODM_PHY_CONFIG BIT28
#define BEAMFORMING_DEBUG BIT29
#define ODM_COMP_COMMON BIT30
#define ODM_COMP_INIT BIT31
#define ODM_COMP_NOISY_DETECT BIT32
/*------------------------Export Marco Definition---------------------------*/
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
#define RT_PRINTK DbgPrint
#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)
#define DbgPrint printk
#define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args);
#define RT_DISP(dbgtype, dbgflag, printstr)
#else
#define DbgPrint panic_printk
#define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args);
#endif
#ifndef ASSERT
#define ASSERT(expr)
#endif
#if DBG
#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) \
do { \
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel || level == ODM_DBG_SERIOUS)) \
{ \
if(pDM_Odm->SupportICType == ODM_RTL8192C) \
DbgPrint("[ODM-92C] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8192D) \
DbgPrint("[ODM-92D] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8723A) \
DbgPrint("[ODM-8723A] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8188E) \
DbgPrint("[ODM-8188E] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8192E) \
DbgPrint("[ODM-8192E] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8812) \
DbgPrint("[ODM-8812] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8821) \
DbgPrint("[ODM-8821] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8814A) \
DbgPrint("[ODM-8814] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8703B) \
DbgPrint("[ODM-8703B] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8822B) \
DbgPrint("[ODM-8822] "); \
else if (pDM_Odm->SupportICType == ODM_RTL8188F) \
DbgPrint("[ODM-8188F] "); \
RT_PRINTK fmt; \
} \
} while (0)
#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) \
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \
{ \
RT_PRINTK fmt; \
}
#define ODM_RT_ASSERT(pDM_Odm, expr, fmt) \
if(!(expr)) { \
DbgPrint( "Assertion failed! %s at ......\n", #expr); \
DbgPrint( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \
RT_PRINTK fmt; \
ASSERT(FALSE); \
}
#define ODM_dbg_enter() { DbgPrint("==> %s\n", __FUNCTION__); }
#define ODM_dbg_exit() { DbgPrint("<== %s\n", __FUNCTION__); }
#define ODM_dbg_trace(str) { DbgPrint("%s:%s\n", __FUNCTION__, str); }
#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) \
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \
{ \
int __i; \
pu1Byte __ptr = (pu1Byte)ptr; \
DbgPrint("[ODM] "); \
DbgPrint(title_str); \
DbgPrint(" "); \
for( __i=0; __i<6; __i++ ) \
DbgPrint("%02X%s", __ptr[__i], (__i==5)?"":"-"); \
DbgPrint("\n"); \
}
#else
#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt)
#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt)
#define ODM_RT_ASSERT(pDM_Odm, expr, fmt)
#define ODM_dbg_enter()
#define ODM_dbg_exit()
#define ODM_dbg_trace(str)
#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr)
#endif
VOID
PHYDM_InitDebugSetting(IN PDM_ODM_T pDM_Odm);
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
VOID phydm_BB_RxHang_Info(IN PDM_ODM_T pDM_Odm);
#endif
#define BB_TMP_BUF_SIZE 100
VOID phydm_BB_Debug_Info(IN PDM_ODM_T pDM_Odm);
VOID phydm_BasicDbgMessage( IN PVOID pDM_VOID);
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
#define PHYDM_DBGPRINT 0
#define PHYDM_SSCANF(x, y, z) DCMD_Scanf(x, y, z)
#if (PHYDM_DBGPRINT == 1)
#define PHYDM_SNPRINTF(msg) \
do {\
rsprintf msg;\
DbgPrint(output);\
} while (0)
#else
#define PHYDM_SNPRINTF(msg) \
do {\
rsprintf msg;\
DCMD_Printf(output);\
} while (0)
#endif
#else
#if (DM_ODM_SUPPORT_TYPE == ODM_CE)
#define PHYDM_DBGPRINT 0
#else
#define PHYDM_DBGPRINT 1
#endif
#define MAX_ARGC 20
#define MAX_ARGV 16
#define DCMD_DECIMAL "%d"
#define DCMD_CHAR "%c"
#define DCMD_HEX "%x"
#define PHYDM_SSCANF(x, y, z) sscanf(x, y, z)
#if (PHYDM_DBGPRINT == 1)
#define PHYDM_SNPRINTF(msg)\
do {\
snprintf msg;\
DbgPrint(output);\
} while (0)
#else
#define PHYDM_SNPRINTF(msg)\
do {\
if(out_len > used)\
used+=snprintf msg;\
} while (0)
#endif
#endif
VOID phydm_BasicProfile(
IN PVOID pDM_VOID,
IN u4Byte *_used,
OUT char *output,
IN u4Byte *_out_len
);
#if(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_AP))
s4Byte
phydm_cmd(
IN PDM_ODM_T pDM_Odm,
IN char *input,
IN u4Byte in_len,
IN u1Byte flag,
OUT char *output,
IN u4Byte out_len
);
#endif
VOID
phydm_cmd_parser(
IN PDM_ODM_T pDM_Odm,
IN char input[][16],
IN u4Byte input_num,
IN u1Byte flag,
OUT char *output,
IN u4Byte out_len
);
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
void phydm_sbd_check(
IN PDM_ODM_T pDM_Odm
);
void phydm_sbd_callback(
PRT_TIMER pTimer
);
void phydm_sbd_workitem_callback(
IN PVOID pContext
);
#endif
VOID
phydm_fw_trace_en_h2c(
IN PVOID pDM_VOID,
IN BOOLEAN enable,
IN u4Byte monitor_mode,
IN u4Byte macid
);
VOID
phydm_fw_trace_handler(
IN PVOID pDM_VOID,
IN pu1Byte CmdBuf,
IN u1Byte CmdLen
);
VOID
phydm_fw_trace_handler_code(
IN PVOID pDM_VOID,
IN pu1Byte Buffer,
IN u1Byte CmdLen
);
VOID
phydm_fw_trace_handler_8051(
IN PVOID pDM_VOID,
IN pu1Byte CmdBuf,
IN u1Byte CmdLen
);
#endif // __ODM_DBG_H__