1
0
mirror of https://github.com/aircrack-ng/rtl8812au.git synced 2024-12-01 17:32:04 +00:00
rtl8812au/include/rtl8812a_spec.h

276 lines
11 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*******************************************************************************/
#ifndef __RTL8812A_SPEC_H__
#define __RTL8812A_SPEC_H__
#include <drv_conf.h>
//============================================================
// 8812 Regsiter offset definition
//============================================================
//============================================================
//
//============================================================
//-----------------------------------------------------
//
// 0x0000h ~ 0x00FFh System Configuration
//
//-----------------------------------------------------
#define REG_SYS_CLKR_8812A 0x0008
#define REG_AFE_PLL_CTRL_8812A 0x0028
#define REG_HSIMR_8812 0x0058
#define REG_HSISR_8812 0x005c
#define REG_GPIO_EXT_CTRL 0x0060
#define REG_GPIO_STATUS_8812 0x006C
#define REG_SDIO_CTRL_8812 0x0070
#define REG_OPT_CTRL_8812 0x0074
#define REG_RF_B_CTRL_8812 0x0076
#define REG_FW_DRV_MSG_8812 0x0088
#define REG_HMEBOX_E2_E3_8812 0x008C
#define REG_HIMR0_8812 0x00B0
#define REG_HISR0_8812 0x00B4
#define REG_HIMR1_8812 0x00B8
#define REG_HISR1_8812 0x00BC
#define REG_EFUSE_BURN_GNT_8812 0x00CF
#define REG_SYS_CFG1_8812 0x00FC
//-----------------------------------------------------
//
// 0x0100h ~ 0x01FFh MACTOP General Configuration
//
//-----------------------------------------------------
#define REG_CR_8812A 0x100
#define REG_PKTBUF_DBG_ADDR (REG_PKTBUF_DBG_CTRL)
#define REG_RXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+2)
#define REG_TXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+3)
#define REG_WOWLAN_WAKE_REASON REG_MCUTST_WOWLAN
#define REG_RSVD3_8812 0x0168
#define REG_C2HEVT_CMD_SEQ_88XX 0x01A1
#define REG_C2hEVT_CMD_CONTENT_88XX 0x01A2
#define REG_C2HEVT_CMD_LEN_88XX 0x01AE
#define REG_HMEBOX_EXT0_8812 0x01F0
#define REG_HMEBOX_EXT1_8812 0x01F4
#define REG_HMEBOX_EXT2_8812 0x01F8
#define REG_HMEBOX_EXT3_8812 0x01FC
//-----------------------------------------------------
//
// 0x0200h ~ 0x027Fh TXDMA Configuration
//
//-----------------------------------------------------
#define REG_DWBCN0_CTRL_8812 REG_TDECTRL
#define REG_DWBCN1_CTRL_8812 0x0228
//-----------------------------------------------------
//
// 0x0280h ~ 0x02FFh RXDMA Configuration
//
//-----------------------------------------------------
#define REG_TDECTRL_8812A 0x0208
#define REG_RXDMA_CONTROL_8812A 0x0286 /*Control the RX DMA.*/
#define REG_RXDMA_PRO_8812 0x0290
#define REG_EARLY_MODE_CONTROL_8812 0x02BC
#define REG_RSVD5_8812 0x02F0
#define REG_RSVD6_8812 0x02F4
#define REG_RSVD7_8812 0x02F8
#define REG_RSVD8_8812 0x02FC
//-----------------------------------------------------
//
// 0x0300h ~ 0x03FFh PCIe
//
//-----------------------------------------------------
#define REG_PCIE_CTRL_REG_8812A 0x0300
#define REG_DBI_WDATA_8812 0x0348 // DBI Write Data
#define REG_DBI_RDATA_8812 0x034C // DBI Read Data
#define REG_DBI_ADDR_8812 0x0350 // DBI Address
#define REG_DBI_FLAG_8812 0x0352 // DBI Read/Write Flag
#define REG_MDIO_WDATA_8812 0x0354 // MDIO for Write PCIE PHY
#define REG_MDIO_RDATA_8812 0x0356 // MDIO for Reads PCIE PHY
#define REG_MDIO_CTL_8812 0x0358 // MDIO for Control
#define REG_PCIE_MULTIFET_CTRL_8812 0x036A //PCIE Multi-Fethc Control
//-----------------------------------------------------
//
// 0x0400h ~ 0x047Fh Protocol Configuration
//
//-----------------------------------------------------
#define REG_TXPKT_EMPTY_8812A 0x041A
#define REG_FWHW_TXQ_CTRL_8812A 0x0420
#define REG_TXBF_CTRL_8812A 0x042C
#define REG_ARFR0_8812 0x0444
#define REG_ARFR1_8812 0x044C
#define REG_CCK_CHECK_8812 0x0454
#define REG_AMPDU_MAX_TIME_8812 0x0456
#define REG_TXPKTBUF_BCNQ_BDNY1_8812 0x0457
#define REG_AMPDU_MAX_LENGTH_8812 0x0458
#define REG_TXPKTBUF_WMAC_LBK_BF_HD_8812 0x045D
#define REG_NDPA_OPT_CTRL_8812A 0x045F
#define REG_DATA_SC_8812 0x0483
#ifdef CONFIG_WOWLAN
#define REG_TXPKTBUF_IV_LOW 0x0484
#define REG_TXPKTBUF_IV_HIGH 0x0488
#endif
#define REG_ARFR2_8812 0x048C
#define REG_ARFR3_8812 0x0494
#define REG_TXRPT_START_OFFSET 0x04AC
#define REG_AMPDU_BURST_MODE_8812 0x04BC
#define REG_HT_SINGLE_AMPDU_8812 0x04C7
#define REG_MACID_PKT_DROP0_8812 0x04D0
//-----------------------------------------------------
//
// 0x0500h ~ 0x05FFh EDCA Configuration
//
//-----------------------------------------------------
#define REG_TXPAUSE_8812A 0x0522
#define REG_CTWND_8812 0x0572
#define REG_SECONDARY_CCA_CTRL_8812 0x0577
#define REG_SCH_TXCMD_8812A 0x05F8
//-----------------------------------------------------
//
// 0x0600h ~ 0x07FFh WMAC Configuration
//
//-----------------------------------------------------
#define REG_MAC_CR_8812 0x0600
#define REG_MAC_TX_SM_STATE_8812 0x06B4
// Power
#define REG_BFMER0_INFO_8812A 0x06E4
#define REG_BFMER1_INFO_8812A 0x06EC
#define REG_CSI_RPT_PARAM_BW20_8812A 0x06F4
#define REG_CSI_RPT_PARAM_BW40_8812A 0x06F8
#define REG_CSI_RPT_PARAM_BW80_8812A 0x06FC
// Hardware Port 2
#define REG_BFMEE_SEL_8812A 0x0714
#define REG_SND_PTCL_CTRL_8812A 0x0718
//-----------------------------------------------------
//
// Redifine register definition for compatibility
//
//-----------------------------------------------------
// TODO: use these definition when using REG_xxx naming rule.
// NOTE: DO NOT Remove these definition. Use later.
#define ISR_8812 REG_HISR0_8812
//----------------------------------------------------------------------------
// 8195 IMR/ISR bits (offset 0xB0, 8bits)
//----------------------------------------------------------------------------
#define IMR_DISABLED_8812 0
// IMR DW0(0x00B0-00B3) Bit 0-31
#define IMR_TIMER2_8812 BIT31 // Timeout interrupt 2
#define IMR_TIMER1_8812 BIT30 // Timeout interrupt 1
#define IMR_PSTIMEOUT_8812 BIT29 // Power Save Time Out Interrupt
#define IMR_GTINT4_8812 BIT28 // When GTIMER4 expires, this bit is set to 1
#define IMR_GTINT3_8812 BIT27 // When GTIMER3 expires, this bit is set to 1
#define IMR_TXBCN0ERR_8812 BIT26 // Transmit Beacon0 Error
#define IMR_TXBCN0OK_8812 BIT25 // Transmit Beacon0 OK
#define IMR_TSF_BIT32_TOGGLE_8812 BIT24 // TSF Timer BIT32 toggle indication interrupt
#define IMR_BCNDMAINT0_8812 BIT20 // Beacon DMA Interrupt 0
#define IMR_BCNDERR0_8812 BIT16 // Beacon Queue DMA OK0
#define IMR_HSISR_IND_ON_INT_8812 BIT15 // HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1)
#define IMR_BCNDMAINT_E_8812 BIT14 // Beacon DMA Interrupt Extension for Win7
#define IMR_ATIMEND_8812 BIT12 // CTWidnow End or ATIM Window End
#define IMR_C2HCMD_8812 BIT10 // CPU to Host Command INT Status, Write 1 clear
#define IMR_CPWM2_8812 BIT9 // CPU power Mode exchange INT Status, Write 1 clear
#define IMR_CPWM_8812 BIT8 // CPU power Mode exchange INT Status, Write 1 clear
#define IMR_HIGHDOK_8812 BIT7 // High Queue DMA OK
#define IMR_MGNTDOK_8812 BIT6 // Management Queue DMA OK
#define IMR_BKDOK_8812 BIT5 // AC_BK DMA OK
#define IMR_BEDOK_8812 BIT4 // AC_BE DMA OK
#define IMR_VIDOK_8812 BIT3 // AC_VI DMA OK
#define IMR_VODOK_8812 BIT2 // AC_VO DMA OK
#define IMR_RDU_8812 BIT1 // Rx Descriptor Unavailable
#define IMR_ROK_8812 BIT0 // Receive DMA OK
// IMR DW1(0x00B4-00B7) Bit 0-31
#define IMR_BCNDMAINT7_8812 BIT27 // Beacon DMA Interrupt 7
#define IMR_BCNDMAINT6_8812 BIT26 // Beacon DMA Interrupt 6
#define IMR_BCNDMAINT5_8812 BIT25 // Beacon DMA Interrupt 5
#define IMR_BCNDMAINT4_8812 BIT24 // Beacon DMA Interrupt 4
#define IMR_BCNDMAINT3_8812 BIT23 // Beacon DMA Interrupt 3
#define IMR_BCNDMAINT2_8812 BIT22 // Beacon DMA Interrupt 2
#define IMR_BCNDMAINT1_8812 BIT21 // Beacon DMA Interrupt 1
#define IMR_BCNDOK7_8812 BIT20 // Beacon Queue DMA OK Interrup 7
#define IMR_BCNDOK6_8812 BIT19 // Beacon Queue DMA OK Interrup 6
#define IMR_BCNDOK5_8812 BIT18 // Beacon Queue DMA OK Interrup 5
#define IMR_BCNDOK4_8812 BIT17 // Beacon Queue DMA OK Interrup 4
#define IMR_BCNDOK3_8812 BIT16 // Beacon Queue DMA OK Interrup 3
#define IMR_BCNDOK2_8812 BIT15 // Beacon Queue DMA OK Interrup 2
#define IMR_BCNDOK1_8812 BIT14 // Beacon Queue DMA OK Interrup 1
#define IMR_ATIMEND_E_8812 BIT13 // ATIM Window End Extension for Win7
#define IMR_TXERR_8812 BIT11 // Tx Error Flag Interrupt Status, write 1 clear.
#define IMR_RXERR_8812 BIT10 // Rx Error Flag INT Status, Write 1 clear
#define IMR_TXFOVW_8812 BIT9 // Transmit FIFO Overflow
#define IMR_RXFOVW_8812 BIT8 // Receive FIFO Overflow
#ifdef CONFIG_PCI_HCI
//#define IMR_RX_MASK (IMR_ROK_8812|IMR_RDU_8812|IMR_RXFOVW_8812)
#define IMR_TX_MASK (IMR_VODOK_8812|IMR_VIDOK_8812|IMR_BEDOK_8812|IMR_BKDOK_8812|IMR_MGNTDOK_8812|IMR_HIGHDOK_8812)
#define RT_BCN_INT_MASKS (IMR_BCNDMAINT0_8812 | IMR_TXBCN0OK_8812 | IMR_TXBCN0ERR_8812 | IMR_BCNDERR0_8812)
#define RT_AC_INT_MASKS (IMR_VIDOK_8812 | IMR_VODOK_8812 | IMR_BEDOK_8812|IMR_BKDOK_8812)
#endif
//============================================================================
// Regsiter Bit and Content definition
//============================================================================
//2 ACMHWCTRL 0x05C0
#define AcmHw_HwEn_8812 BIT(0)
#define AcmHw_VoqEn_8812 BIT(1)
#define AcmHw_ViqEn_8812 BIT(2)
#define AcmHw_BeqEn_8812 BIT(3)
#define AcmHw_VoqStatus_8812 BIT(5)
#define AcmHw_ViqStatus_8812 BIT(6)
#define AcmHw_BeqStatus_8812 BIT(7)
//========================================================
// General definitions
//========================================================
#define MACID_NUM_8812A 128
#define SEC_CAM_ENT_NUM_8812A 64
#define NSS_NUM_8812A 2
#define BAND_CAP_8812A (BAND_CAP_2G | BAND_CAP_5G)
#define BW_CAP_8812A (BW_CAP_20M | BW_CAP_40M | BW_CAP_80M)
#endif /* __RTL8812A_SPEC_H__ */
#ifdef CONFIG_RTL8821A
#include "rtl8821a_spec.h"
#endif /* CONFIG_RTL8821A */