/****************************************************************************** * * Copyright(c) 2007 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ #define _RTL8812AU_XMIT_C_ /* #include */ #include s32 rtl8814au_init_xmit_priv(_adapter *padapter) { struct xmit_priv *pxmitpriv = &padapter->xmitpriv; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); #ifdef PLATFORM_LINUX tasklet_init(&pxmitpriv->xmit_tasklet, (void(*)(unsigned long))rtl8814au_xmit_tasklet, (unsigned long)padapter); #endif #ifdef CONFIG_TX_EARLY_MODE pHalData->bEarlyModeEnable = padapter->registrypriv.early_mode; #endif return _SUCCESS; } void rtl8814au_free_xmit_priv(_adapter *padapter) { } static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bagg_pkt) { int pull=0; uint qsel; u8 data_rate,pwr_status,offset; _adapter *padapter = pxmitframe->padapter; struct mlme_priv *pmlmepriv = &padapter->mlmepriv; struct pkt_attrib *pattrib = &pxmitframe->attrib; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); u8 *ptxdesc = pmem; struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); sint bmcst = IS_MCAST(pattrib->ra); u16 SWDefineContent = 0x0; u8 DriverFixedRate = 0x0; struct registry_priv *pregpriv = &(padapter->registrypriv); #ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX if (padapter->registrypriv.mp_mode == 0) { if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt) &&(rtw_usb_bulk_size_boundary(padapter,TXDESC_SIZE+sz)==_FALSE)) { ptxdesc = (pmem+PACKET_OFFSET_SZ); //RTW_INFO("==> non-agg-pkt,shift pointer...\n"); pull = 1; } } #endif // CONFIG_USE_USB_BUFFER_ALLOC_TX _rtw_memset(ptxdesc, 0, TXDESC_SIZE); //4 offset 0 //SET_TX_DESC_FIRST_SEG_8812(ptxdesc, 1); SET_TX_DESC_LAST_SEG_8814A(ptxdesc, 1); //SET_TX_DESC_OWN_8812(ptxdesc, 1); //RTW_INFO("%s==> pkt_len=%d,bagg_pkt=%02x\n",__FUNCTION__,sz,bagg_pkt); SET_TX_DESC_PKT_SIZE_8814A(ptxdesc, sz); offset = TXDESC_SIZE + OFFSET_SZ; #ifdef CONFIG_TX_EARLY_MODE if(bagg_pkt){ offset += EARLY_MODE_INFO_SIZE ;//0x28 } #endif //RTW_INFO("%s==>offset(0x%02x) \n",__FUNCTION__,offset); SET_TX_DESC_OFFSET_8814A(ptxdesc, offset); if (bmcst) { SET_TX_DESC_BMC_8814A(ptxdesc, 1); } #ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX if (padapter->registrypriv.mp_mode == 0) { if ((PACKET_OFFSET_SZ != 0) && (!bagg_pkt)) { if ((pull) && (pxmitframe->pkt_offset>0)) { pxmitframe->pkt_offset = pxmitframe->pkt_offset -1; } } } #endif //RTW_INFO("%s, pkt_offset=0x%02x\n",__FUNCTION__,pxmitframe->pkt_offset); // pkt_offset, unit:8 bytes padding if (pxmitframe->pkt_offset > 0) { SET_TX_DESC_PKT_OFFSET_8814A(ptxdesc, pxmitframe->pkt_offset); } SET_TX_DESC_MACID_8814A(ptxdesc, pattrib->mac_id); SET_TX_DESC_RATE_ID_8814A(ptxdesc, pattrib->raid); SET_TX_DESC_QUEUE_SEL_8814A(ptxdesc, pattrib->qsel); //offset 12 if (pattrib->injected == _TRUE && !pregpriv->monitor_overwrite_seqnum) { /* Prevent sequence number from being overwritten */ SET_TX_DESC_HWSEQ_EN_8814A(ptxdesc, 0); /* Hw do not set sequence number */ SET_TX_DESC_SEQ_8814A(ptxdesc, pattrib->seqnum); /* Copy inject sequence number to TxDesc */ } else if (!pattrib->qos_en) { /* HW sequence, to fix to use 0 queue. todo: 4AC packets to use auto queue select */ SET_TX_DESC_HWSEQ_EN_8814A(ptxdesc, 1); // Hw set sequence number SET_TX_DESC_EN_HWEXSEQ_8814A(ptxdesc, 0); SET_TX_DESC_DISQSELSEQ_8814A(ptxdesc, 1); SET_TX_DESC_HW_SSN_SEL_8814A(ptxdesc, 0); } else { SET_TX_DESC_SEQ_8814A(ptxdesc, pattrib->seqnum); } if ((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG) { //RTW_INFO("pxmitframe->frame_tag == DATA_FRAMETAG\n"); rtl8814a_fill_txdesc_sectype(pattrib, ptxdesc); //offset 20 #ifdef CONFIG_USB_TX_AGGREGATION if (pxmitframe->agg_num > 1){ //RTW_INFO("%s agg_num:%d\n",__FUNCTION__,pxmitframe->agg_num ); SET_TX_DESC_USB_TXAGG_NUM_8814A(ptxdesc, pxmitframe->agg_num); } #endif //CONFIG_USB_TX_AGGREGATION rtl8814a_fill_txdesc_vcs(padapter, pattrib, ptxdesc); if ((pattrib->ether_type != 0x888e) && (pattrib->ether_type != 0x0806) && (pattrib->ether_type != 0x88b4) && (pattrib->dhcp_pkt != 1) #ifdef CONFIG_AUTO_AP_MODE && (pattrib->pctrl != _TRUE) #endif ) { //Non EAP & ARP & DHCP type data packet if (pattrib->ampdu_en==_TRUE) { SET_TX_DESC_AGG_ENABLE_8814A(ptxdesc, 1); SET_TX_DESC_MAX_AGG_NUM_8814A(ptxdesc, 0x1f); // Set A-MPDU aggregation. SET_TX_DESC_AMPDU_DENSITY_8814A(ptxdesc, pattrib->ampdu_spacing); } else { SET_TX_DESC_BK_8814A(ptxdesc, 1); } rtl8814a_fill_txdesc_phy(padapter, pattrib, ptxdesc); //DATA Rate FB LMT //SET_TX_DESC_DATA_RATE_FB_LIMIT_8814A(ptxdesc, 0x1f); if(pHalData->current_band_type == BAND_ON_5G) { SET_TX_DESC_DATA_RATE_FB_LIMIT_8814A(ptxdesc, 4); } else { SET_TX_DESC_DATA_RATE_FB_LIMIT_8814A(ptxdesc, 0); } if (pHalData->fw_ractrl == _FALSE) { SET_TX_DESC_USE_RATE_8814A(ptxdesc, 1); DriverFixedRate = 0x01; if(pHalData->INIDATA_RATE[pattrib->mac_id] & BIT(7)) SET_TX_DESC_DATA_SHORT_8814A(ptxdesc, 1); SET_TX_DESC_TX_RATE_8814A(ptxdesc, (pHalData->INIDATA_RATE[pattrib->mac_id] & 0x7F)); } if (padapter->fix_rate != 0xFF) { // modify data rate by iwpriv SET_TX_DESC_USE_RATE_8814A(ptxdesc, 1); DriverFixedRate = 0x01; if(padapter->fix_rate & BIT(7)) SET_TX_DESC_DATA_SHORT_8814A(ptxdesc, 1); SET_TX_DESC_TX_RATE_8814A(ptxdesc, (padapter->fix_rate & 0x7F)); if (!padapter->data_fb) SET_TX_DESC_DISABLE_FB_8814A(ptxdesc,1); } if (pattrib->ldpc) SET_TX_DESC_DATA_LDPC_8814A(ptxdesc, 1); if (pattrib->stbc) SET_TX_DESC_DATA_STBC_8814A(ptxdesc, 1); //work arond before fixing RA //SET_TX_DESC_USE_RATE_8814A(ptxdesc, 1); //SET_TX_DESC_TX_RATE_8814A(ptxdesc, 0x10); } else { // EAP data packet and ARP packet and DHCP. // Use the 1M data rate to send the EAP/ARP packet. // This will maybe make the handshake smooth. SET_TX_DESC_USE_RATE_8814A(ptxdesc, 1); DriverFixedRate = 0x01; SET_TX_DESC_BK_8814A(ptxdesc, 1); // HW will ignore this setting if the transmission rate is legacy OFDM. if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT) { SET_TX_DESC_DATA_SHORT_8814A(ptxdesc, 1); } SET_TX_DESC_TX_RATE_8814A(ptxdesc, MRateToHwRate(pmlmeext->tx_rate)); } } else if ((pxmitframe->frame_tag&0x0f)== MGNT_FRAMETAG) { //RTW_INFO("pxmitframe->frame_tag == MGNT_FRAMETAG\n"); SET_TX_DESC_USE_RATE_8814A(ptxdesc, 1); DriverFixedRate = 0x01; #ifdef CONFIG_INTEL_PROXIM if ((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){ RTW_INFO("\n %s pattrib->rate=%d\n", __func__,pattrib->rate); SET_TX_DESC_TX_RATE_8814A(ptxdesc, pattrib->rate); } else #endif { SET_TX_DESC_TX_RATE_8814A(ptxdesc, MRateToHwRate(pattrib->rate)); } #ifdef CONFIG_BEAMFORMING // VHT NDPA or HT NDPA Packet for Beamformer. if ((pattrib->subtype == WIFI_NDPA) || ((pattrib->subtype == WIFI_ACTION_NOACK) && (pattrib->order == 1))) { SET_TX_DESC_NAV_USE_HDR_8814A(ptxdesc, 1); SET_TX_DESC_DATA_BW_8814A(ptxdesc, BWMapping_8814(padapter,pattrib)); SET_TX_DESC_RTS_SC_8814A(ptxdesc, SCMapping_8814(padapter,pattrib)); SET_TX_DESC_RETRY_LIMIT_ENABLE_8814A(ptxdesc, 1); SET_TX_DESC_DATA_RETRY_LIMIT_8814A(ptxdesc, 5); SET_TX_DESC_DISABLE_FB_8814A(ptxdesc, 1); //if(pattrib->rts_cca) //{ // SET_TX_DESC_NDPA_8812(ptxdesc, 2); //} //else { SET_TX_DESC_NDPA_8814A(ptxdesc, 1); } } else #endif { SET_TX_DESC_RETRY_LIMIT_ENABLE_8814A(ptxdesc, 1); if (pattrib->retry_ctrl == _TRUE) { SET_TX_DESC_DATA_RETRY_LIMIT_8814A(ptxdesc, 6); } else { SET_TX_DESC_DATA_RETRY_LIMIT_8814A(ptxdesc, 0); } } #ifdef CONFIG_XMIT_ACK //CCX-TXRPT ack for xmit mgmt frames. if (pxmitframe->ack_report) { SET_TX_DESC_SPE_RPT_8814A(ptxdesc, 1); #ifdef DBG_CCX RTW_INFO("%s set tx report\n", __func__); #endif } #endif //CONFIG_XMIT_ACK } else if((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG) { RTW_INFO("pxmitframe->frame_tag == TXAGG_FRAMETAG\n"); } #ifdef CONFIG_MP_INCLUDED else if(((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG) && (padapter->registrypriv.mp_mode == 1)) { fill_txdesc_for_mp(padapter, ptxdesc); } #endif else { RTW_INFO("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag); SET_TX_DESC_USE_RATE_8814A(ptxdesc, 1); DriverFixedRate = 0x01; SET_TX_DESC_TX_RATE_8814A(ptxdesc, MRateToHwRate(pmlmeext->tx_rate)); } if (DriverFixedRate) SWDefineContent |= 0x01; SET_TX_DESC_SW_DEFINE_8814A(ptxdesc, SWDefineContent); SET_TX_DESC_GID_8814A(ptxdesc, pattrib->txbf_g_id); SET_TX_DESC_PAID_8814A(ptxdesc, pattrib->txbf_p_aid); rtl8814a_cal_txdesc_chksum(ptxdesc); _dbg_dump_tx_info(padapter,pxmitframe->frame_tag,ptxdesc); return pull; } #ifdef CONFIG_XMIT_THREAD_MODE /* * Description * Transmit xmitbuf to hardware tx fifo * * Return * _SUCCESS ok * _FAIL something error */ s32 rtl8814au_xmit_buf_handler(PADAPTER padapter) { PHAL_DATA_TYPE phal; struct xmit_priv *pxmitpriv; struct xmit_buf *pxmitbuf; s32 ret; phal = GET_HAL_DATA(padapter); pxmitpriv = &padapter->xmitpriv; ret = _rtw_down_sema(&pxmitpriv->xmit_sema); if (_FAIL == ret) { RTW_ERR("%s: down SdioXmitBufSema fail!\n", __FUNCTION__); return _FAIL; } if (RTW_CANNOT_RUN(padapter)) { RTW_ERR( , ("%s: bDriverStopped(%s) bSurpriseRemoved(%s)!\n" , __func__ , rtw_is_drv_stopped(padapter)?"True":"False" , rtw_is_surprise_removed(padapter)?"True":"False"); return _FAIL; } if(check_pending_xmitbuf(pxmitpriv) == _FALSE) return _SUCCESS; #ifdef CONFIG_LPS_LCLK ret = rtw_register_tx_alive(padapter); if (ret != _SUCCESS) { RTW_ERR("%s: wait to leave LPS_LCLK\n", __FUNCTION__); return _SUCCESS; } #endif //CONFIG_LPS_LCLK do { pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv); if (pxmitbuf == NULL) break; rtw_write_port(padapter, pxmitbuf->ff_hwaddr, pxmitbuf->len, (unsigned char*)pxmitbuf); } while (1); #ifdef CONFIG_LPS_LCLK rtw_unregister_tx_alive(padapter); #endif //CONFIG_LPS_LCLK return _SUCCESS; } #endif //CONFIG_XMIT_THREAD_MODE //for non-agg data frame or management frame static s32 rtw_dump_xframe(_adapter *padapter, struct xmit_frame *pxmitframe) { s32 ret = _SUCCESS; s32 inner_ret = _SUCCESS; int t, sz, w_sz, pull=0; u8 *mem_addr; u32 ff_hwaddr; struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf; struct pkt_attrib *pattrib = &pxmitframe->attrib; struct xmit_priv *pxmitpriv = &padapter->xmitpriv; struct security_priv *psecuritypriv = &padapter->securitypriv; #ifdef CONFIG_80211N_HT if ((pxmitframe->frame_tag == DATA_FRAMETAG) && (pxmitframe->attrib.ether_type != 0x0806) && (pxmitframe->attrib.ether_type != 0x888e) && (pxmitframe->attrib.ether_type != 0x88b4) && (pxmitframe->attrib.dhcp_pkt != 1)) { rtw_issue_addbareq_cmd(padapter, pxmitframe); } #endif //CONFIG_80211N_HT mem_addr = pxmitframe->buf_addr; //RTW_INFO("rtw_dump_xframe()\n"); for (t = 0; t < pattrib->nr_frags; t++) { if (inner_ret != _SUCCESS && ret == _SUCCESS) ret = _FAIL; if (t != (pattrib->nr_frags - 1)) { RTW_DBG("pattrib->nr_frags=%d\n", pattrib->nr_frags); sz = pxmitpriv->frag_len; sz = sz - 4 - (psecuritypriv->sw_encrypt ? 0 : pattrib->icv_len); } else //no frag { sz = pattrib->last_txcmdsz; } pull = update_txdesc(pxmitframe, mem_addr, sz, _FALSE); if (pull) { mem_addr += PACKET_OFFSET_SZ; //pull txdesc head //pxmitbuf ->pbuf = mem_addr; pxmitframe->buf_addr = mem_addr; w_sz = sz + TXDESC_SIZE; } else { w_sz = sz + TXDESC_SIZE + PACKET_OFFSET_SZ; } ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe); #ifdef CONFIG_XMIT_THREAD_MODE pxmitbuf->len = w_sz; pxmitbuf->ff_hwaddr = ff_hwaddr; enqueue_pending_xmitbuf(pxmitpriv, pxmitbuf); #else inner_ret = rtw_write_port(padapter, ff_hwaddr, w_sz, (unsigned char*)pxmitbuf); #endif rtw_count_tx_stats(padapter, pxmitframe, sz); //RTW_INFO("rtw_write_port, w_sz=%d\n", w_sz); //RTW_INFO("rtw_write_port, w_sz=%d, sz=%d, txdesc_sz=%d, tid=%d\n", w_sz, sz, w_sz-sz, pattrib->priority); mem_addr += w_sz; mem_addr = (u8 *)RND4(((SIZE_PTR)(mem_addr))); } rtw_free_xmitframe(pxmitpriv, pxmitframe); if (ret != _SUCCESS) rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_UNKNOWN); return ret; } #ifdef CONFIG_USB_TX_AGGREGATION static u32 xmitframe_need_length(struct xmit_frame *pxmitframe) { struct pkt_attrib *pattrib = &pxmitframe->attrib; u32 len = 0; // no consider fragement len = pattrib->hdrlen + pattrib->iv_len + SNAP_SIZE + sizeof(u16) + pattrib->pktlen + ((pattrib->bswenc) ? pattrib->icv_len : 0); if(pattrib->encrypt ==_TKIP_) len += 8; return len; } #define IDEA_CONDITION 1 // check all packets before enqueue s32 rtl8814au_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); struct xmit_frame *pxmitframe = NULL; struct xmit_frame *pfirstframe = NULL; // aggregate variable struct hw_xmit *phwxmit; struct sta_info *psta = NULL; struct tx_servq *ptxservq = NULL; _irqL irqL; _list *xmitframe_plist = NULL, *xmitframe_phead = NULL; u32 pbuf; // next pkt address u32 pbuf_tail; // last pkt tail u32 len; // packet length, except TXDESC_SIZE and PKT_OFFSET u32 bulkSize = pHalData->UsbBulkOutSize; u8 descCount; u32 bulkPtr; // dump frame variable u32 ff_hwaddr; _list *sta_plist, *sta_phead; u8 single_sta_in_queue = _FALSE; #ifndef IDEA_CONDITION int res = _SUCCESS; #endif RTW_INFO("+xmitframe_complete\n"); // check xmitbuffer is ok if (pxmitbuf == NULL) { pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); if (pxmitbuf == NULL){ //RTW_INFO("%s #1, connot alloc xmitbuf!!!! \n",__FUNCTION__); return _FALSE; } } //RTW_INFO("%s ===================================== \n",__FUNCTION__); //3 1. pick up first frame do { rtw_free_xmitframe(pxmitpriv, pxmitframe); pxmitframe = rtw_dequeue_xframe(pxmitpriv, pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry); if (pxmitframe == NULL) { // no more xmit frame, release xmit buffer //RTW_INFO("no more xmit frame ,return\n"); rtw_free_xmitbuf(pxmitpriv, pxmitbuf); return _FALSE; } #ifndef IDEA_CONDITION if (pxmitframe->frame_tag != DATA_FRAMETAG) { RTW_INFO("xmitframe_complete: frame tag(%d) is not DATA_FRAMETAG(%d)!\n", pxmitframe->frame_tag, DATA_FRAMETAG); // rtw_free_xmitframe(pxmitpriv, pxmitframe); continue; } // TID 0~15 if ((pxmitframe->attrib.priority < 0) || (pxmitframe->attrib.priority > 15)) { RTW_INFO("xmitframe_complete: TID(%d) should be 0~15!\n", pxmitframe->attrib.priority); // rtw_free_xmitframe(pxmitpriv, pxmitframe); continue; } #endif //RTW_INFO("==> pxmitframe->attrib.priority:%d\n",pxmitframe->attrib.priority); pxmitframe->pxmitbuf = pxmitbuf; pxmitframe->buf_addr = pxmitbuf->pbuf; pxmitbuf->priv_data = pxmitframe; pxmitframe->agg_num = 1; // alloc xmitframe should assign to 1. #ifdef CONFIG_TX_EARLY_MODE pxmitframe->pkt_offset = (PACKET_OFFSET_SZ/8)+1; // 2; // first frame of aggregation, reserve one offset for EM info ,another for usb bulk-out block check #else pxmitframe->pkt_offset = (PACKET_OFFSET_SZ/8); // 1; // first frame of aggregation, reserve offset #endif if (rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe) == _FALSE) { RTW_INFO("%s coalesce 1st xmitframe failed \n",__FUNCTION__); continue; } // always return ndis_packet after rtw_xmitframe_coalesce rtw_os_xmit_complete(padapter, pxmitframe); break; } while (1); //3 2. aggregate same priority and same DA(AP or STA) frames pfirstframe = pxmitframe; len = xmitframe_need_length(pfirstframe) + TXDESC_SIZE+(pfirstframe->pkt_offset*PACKET_OFFSET_SZ); pbuf_tail = len; pbuf = _RND8(pbuf_tail); // check pkt amount in one bulk descCount = 0; bulkPtr = bulkSize; if (pbuf < bulkPtr) descCount++; if (descCount == pHalData->UsbTxAggDescNum) goto agg_end; else { descCount = 0; bulkPtr = ((pbuf / bulkSize) + 1) * bulkSize; // round to next bulkSize } // dequeue same priority packet from station tx queue psta = pfirstframe->attrib.psta; switch (pfirstframe->attrib.priority) { case 1: case 2: ptxservq = &(psta->sta_xmitpriv.bk_q); phwxmit = pxmitpriv->hwxmits + 3; break; case 4: case 5: ptxservq = &(psta->sta_xmitpriv.vi_q); phwxmit = pxmitpriv->hwxmits + 1; break; case 6: case 7: ptxservq = &(psta->sta_xmitpriv.vo_q); phwxmit = pxmitpriv->hwxmits; break; case 0: case 3: default: ptxservq = &(psta->sta_xmitpriv.be_q); phwxmit = pxmitpriv->hwxmits + 2; break; } //RTW_INFO("==> pkt_no=%d,pkt_len=%d,len=%d,RND8_LEN=%d,pkt_offset=0x%02x\n", //pxmitframe->agg_num,pxmitframe->attrib.last_txcmdsz,len,pbuf,pxmitframe->pkt_offset ); _enter_critical_bh(&pxmitpriv->lock, &irqL); sta_phead = get_list_head(phwxmit->sta_queue); sta_plist = get_next(sta_phead); single_sta_in_queue = rtw_end_of_queue_search(sta_phead, get_next(sta_plist)); xmitframe_phead = get_list_head(&ptxservq->sta_pending); xmitframe_plist = get_next(xmitframe_phead); while (rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist) == _FALSE) { pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); xmitframe_plist = get_next(xmitframe_plist); if(_FAIL == rtw_hal_busagg_qsel_check(padapter,pfirstframe->attrib.qsel,pxmitframe->attrib.qsel)) break; pxmitframe->agg_num = 0; // not first frame of aggregation #ifdef CONFIG_TX_EARLY_MODE pxmitframe->pkt_offset = 1;// not first frame of aggregation,reserve offset for EM Info #else pxmitframe->pkt_offset = 0; // not first frame of aggregation, no need to reserve offset #endif len = xmitframe_need_length(pxmitframe) + TXDESC_SIZE +(pxmitframe->pkt_offset*PACKET_OFFSET_SZ); if (_RND8(pbuf + len) > MAX_XMITBUF_SZ) //if (_RND8(pbuf + len) > (MAX_XMITBUF_SZ/2))//to do : for TX TP finial tune , Georgia 2012-0323 { //RTW_INFO("%s....len> MAX_XMITBUF_SZ\n",__FUNCTION__); pxmitframe->agg_num = 1; pxmitframe->pkt_offset = 1; break; } rtw_list_delete(&pxmitframe->list); ptxservq->qcnt--; phwxmit->accnt--; #ifndef IDEA_CONDITION // suppose only data frames would be in queue if (pxmitframe->frame_tag != DATA_FRAMETAG) { RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_, ("xmitframe_complete: frame tag(%d) is not DATA_FRAMETAG(%d)!\n", pxmitframe->frame_tag, DATA_FRAMETAG)); rtw_free_xmitframe(pxmitpriv, pxmitframe); continue; } // TID 0~15 if ((pxmitframe->attrib.priority < 0) || (pxmitframe->attrib.priority > 15)) { RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_, ("xmitframe_complete: TID(%d) should be 0~15!\n", pxmitframe->attrib.priority)); rtw_free_xmitframe(pxmitpriv, pxmitframe); continue; } #endif // pxmitframe->pxmitbuf = pxmitbuf; pxmitframe->buf_addr = pxmitbuf->pbuf + pbuf; if (rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe) == _FALSE) { RTW_INFO("%s coalesce failed \n",__FUNCTION__); rtw_free_xmitframe(pxmitpriv, pxmitframe); continue; } //RTW_INFO("==> pxmitframe->attrib.priority:%d\n",pxmitframe->attrib.priority); // always return ndis_packet after rtw_xmitframe_coalesce rtw_os_xmit_complete(padapter, pxmitframe); // (len - TXDESC_SIZE) == pxmitframe->attrib.last_txcmdsz update_txdesc(pxmitframe, pxmitframe->buf_addr, pxmitframe->attrib.last_txcmdsz,_TRUE); // don't need xmitframe any more rtw_free_xmitframe(pxmitpriv, pxmitframe); // handle pointer and stop condition pbuf_tail = pbuf + len; pbuf = _RND8(pbuf_tail); pfirstframe->agg_num++; #ifdef CONFIG_TX_EARLY_MODE pxmitpriv->agg_pkt[pfirstframe->agg_num-1].offset = _RND8(len); pxmitpriv->agg_pkt[pfirstframe->agg_num-1].pkt_len = pxmitframe->attrib.last_txcmdsz; #endif if (MAX_TX_AGG_PACKET_NUMBER == pfirstframe->agg_num) break; if (pbuf < bulkPtr) { descCount++; if (descCount == pHalData->UsbTxAggDescNum) break; } else { descCount = 0; bulkPtr = ((pbuf / bulkSize) + 1) * bulkSize; } }//end while( aggregate same priority and same DA(AP or STA) frames) if (_rtw_queue_empty(&ptxservq->sta_pending) == _TRUE) rtw_list_delete(&ptxservq->tx_pending); else if (single_sta_in_queue == _FALSE) { /* Re-arrange the order of stations in this ac queue to balance the service for these stations */ rtw_list_delete(&ptxservq->tx_pending); rtw_list_insert_tail(&ptxservq->tx_pending, get_list_head(phwxmit->sta_queue)); } _exit_critical_bh(&pxmitpriv->lock, &irqL); agg_end: #ifdef CONFIG_80211N_HT if ((pfirstframe->attrib.ether_type != 0x0806) && (pfirstframe->attrib.ether_type != 0x888e) && (pfirstframe->attrib.ether_type != 0x88b4) && (pfirstframe->attrib.dhcp_pkt != 1)) { rtw_issue_addbareq_cmd(padapter, pfirstframe); } #endif //CONFIG_80211N_HT #ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX //3 3. update first frame txdesc if ((PACKET_OFFSET_SZ != 0) && ((pbuf_tail % bulkSize) == 0)) { // remove pkt_offset pbuf_tail -= PACKET_OFFSET_SZ; pfirstframe->buf_addr += PACKET_OFFSET_SZ; pfirstframe->pkt_offset--; //RTW_INFO("$$$$$ buf size equal to USB block size $$$$$$\n"); } #endif // CONFIG_USE_USB_BUFFER_ALLOC_TX update_txdesc(pfirstframe, pfirstframe->buf_addr, pfirstframe->attrib.last_txcmdsz,_TRUE); #ifdef CONFIG_TX_EARLY_MODE //prepare EM info for first frame, agg_num value start from 1 pxmitpriv->agg_pkt[0].offset = _RND8(pfirstframe->attrib.last_txcmdsz +TXDESC_SIZE +(pfirstframe->pkt_offset*PACKET_OFFSET_SZ)); pxmitpriv->agg_pkt[0].pkt_len = pfirstframe->attrib.last_txcmdsz;//get from rtw_xmitframe_coalesce UpdateEarlyModeInfo8812(pxmitpriv,pxmitbuf ); #endif //3 4. write xmit buffer to USB FIFO ff_hwaddr = rtw_get_ff_hwaddr(pfirstframe); //RTW_INFO("%s ===================================== write port,buf_size(%d) \n",__FUNCTION__,pbuf_tail); // xmit address == ((xmit_frame*)pxmitbuf->priv_data)->buf_addr rtw_write_port(padapter, ff_hwaddr, pbuf_tail, (u8*)pxmitbuf); //3 5. update statisitc pbuf_tail -= (pfirstframe->agg_num * TXDESC_SIZE); pbuf_tail -= (pfirstframe->pkt_offset * PACKET_OFFSET_SZ); rtw_count_tx_stats(padapter, pfirstframe, pbuf_tail); rtw_free_xmitframe(pxmitpriv, pfirstframe); return _TRUE; } #else //CONFIG_USB_TX_AGGREGATION s32 rtl8814au_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf) { struct hw_xmit *phwxmits; sint hwentry; struct xmit_frame *pxmitframe=NULL; int res=_SUCCESS, xcnt = 0; phwxmits = pxmitpriv->hwxmits; hwentry = pxmitpriv->hwxmit_entry; RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("xmitframe_complete()\n")); if(pxmitbuf==NULL) { pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); if(!pxmitbuf) { return _FALSE; } } do { pxmitframe = rtw_dequeue_xframe(pxmitpriv, phwxmits, hwentry); if(pxmitframe) { pxmitframe->pxmitbuf = pxmitbuf; pxmitframe->buf_addr = pxmitbuf->pbuf; pxmitbuf->priv_data = pxmitframe; if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG) { if(pxmitframe->attrib.priority<=15)//TID0~15 { res = rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe); } //RTW_INFO("==> pxmitframe->attrib.priority:%d\n",pxmitframe->attrib.priority); rtw_os_xmit_complete(padapter, pxmitframe);//always return ndis_packet after rtw_xmitframe_coalesce } RTW_DBG("xmitframe_complete(): rtw_dump_xframe\n"); if(res == _SUCCESS) { rtw_dump_xframe(padapter, pxmitframe); } else { rtw_free_xmitbuf(pxmitpriv, pxmitbuf); rtw_free_xmitframe(pxmitpriv, pxmitframe); } xcnt++; } else { rtw_free_xmitbuf(pxmitpriv, pxmitbuf); return _FALSE; } break; }while(0/*xcnt < (NR_XMITFRAME >> 3)*/); return _TRUE; } #endif static s32 xmitframe_direct(_adapter *padapter, struct xmit_frame *pxmitframe) { s32 res = _SUCCESS; //RTW_INFO("==> %s \n",__FUNCTION__); res = rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe); if (res == _SUCCESS) { rtw_dump_xframe(padapter, pxmitframe); } else{ RTW_INFO("==> %s xmitframe_coalsece failed\n",__FUNCTION__); } return res; } /* * Return * _TRUE dump packet directly * _FALSE enqueue packet */ static s32 pre_xmitframe(_adapter *padapter, struct xmit_frame *pxmitframe) { _irqL irqL; s32 res; struct xmit_buf *pxmitbuf = NULL; struct xmit_priv *pxmitpriv = &padapter->xmitpriv; struct pkt_attrib *pattrib = &pxmitframe->attrib; struct mlme_priv *pmlmepriv = &padapter->mlmepriv; u8 lg_sta_num; _enter_critical_bh(&pxmitpriv->lock, &irqL); if (rtw_txframes_sta_ac_pending(padapter, pattrib) > 0) { //RTW_INFO("enqueue AC(%d)\n",pattrib->priority); goto enqueue; } if (rtw_xmit_ac_blocked(padapter) == _TRUE) goto enqueue; if (padapter->dvobj->iface_state.lg_sta_num) goto enqueue; pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); if (pxmitbuf == NULL) goto enqueue; _exit_critical_bh(&pxmitpriv->lock, &irqL); pxmitframe->pxmitbuf = pxmitbuf; pxmitframe->buf_addr = pxmitbuf->pbuf; pxmitbuf->priv_data = pxmitframe; if (xmitframe_direct(padapter, pxmitframe) != _SUCCESS) { rtw_free_xmitbuf(pxmitpriv, pxmitbuf); rtw_free_xmitframe(pxmitpriv, pxmitframe); } return _TRUE; enqueue: res = rtw_xmitframe_enqueue(padapter, pxmitframe); _exit_critical_bh(&pxmitpriv->lock, &irqL); if (res != _SUCCESS) { RTW_ERR("pre_xmitframe: enqueue xmitframe fail\n"); rtw_free_xmitframe(pxmitpriv, pxmitframe); pxmitpriv->tx_drop++; return _TRUE; } return _FALSE; } s32 rtl8814au_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe) { return rtw_dump_xframe(padapter, pmgntframe); } /* * Return * _TRUE dump packet directly ok * _FALSE temporary can't transmit packets to hardware */ s32 rtl8814au_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe) { return pre_xmitframe(padapter, pxmitframe); } s32 rtl8814au_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe) { struct xmit_priv *pxmitpriv = &padapter->xmitpriv; s32 err; if ((err=rtw_xmitframe_enqueue(padapter, pxmitframe)) != _SUCCESS) { rtw_free_xmitframe(pxmitpriv, pxmitframe); pxmitpriv->tx_drop++; } else { #ifdef PLATFORM_LINUX tasklet_hi_schedule(&pxmitpriv->xmit_tasklet); #endif } return err; } #ifdef CONFIG_HOSTAPD_MLME static void rtl8814au_hostap_mgnt_xmit_cb(struct urb *urb) { #ifdef PLATFORM_LINUX struct sk_buff *skb = (struct sk_buff *)urb->context; //RTW_INFO("%s\n", __FUNCTION__); rtw_skb_free(skb); #endif } s32 rtl8814au_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt) { #ifdef PLATFORM_LINUX u16 fc; int rc, len, pipe; unsigned int bmcst, tid, qsel; struct sk_buff *skb, *pxmit_skb; struct urb *urb; unsigned char *pxmitbuf; struct tx_desc *ptxdesc; struct rtw_ieee80211_hdr *tx_hdr; struct hostapd_priv *phostapdpriv = padapter->phostapdpriv; struct net_device *pnetdev = padapter->pnetdev; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter); //RTW_INFO("%s\n", __FUNCTION__); skb = pkt; len = skb->len; tx_hdr = (struct rtw_ieee80211_hdr *)(skb->data); fc = le16_to_cpu(tx_hdr->frame_ctl); bmcst = IS_MCAST(tx_hdr->addr1); if ((fc & RTW_IEEE80211_FCTL_FTYPE) != RTW_IEEE80211_FTYPE_MGMT) goto _exit; pxmit_skb = rtw_skb_alloc(len + TXDESC_SIZE); if(!pxmit_skb) goto _exit; pxmitbuf = pxmit_skb->data; urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { goto _exit; } // ----- fill tx desc ----- ptxdesc = (struct tx_desc *)pxmitbuf; _rtw_memset(ptxdesc, 0, sizeof(*ptxdesc)); //offset 0 ptxdesc->txdw0 |= cpu_to_le32(len&0x0000ffff); ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<txdw0 |= cpu_to_le32(OWN | FSG | LSG); if(bmcst) { ptxdesc->txdw0 |= cpu_to_le32(BIT(24)); } //offset 4 ptxdesc->txdw1 |= cpu_to_le32(0x00);//MAC_ID ptxdesc->txdw1 |= cpu_to_le32((0x12<txdw1 |= cpu_to_le32((0x06<< 16) & 0x000f0000);//b mode //offset 8 //offset 12 ptxdesc->txdw3 |= cpu_to_le32((le16_to_cpu(tx_hdr->seq_ctl)<<16)&0xffff0000); //offset 16 ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate //offset 20 //HW append seq ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29. rtl8188eu_cal_txdesc_chksum(ptxdesc); // ----- end of fill tx desc ----- // skb_put(pxmit_skb, len + TXDESC_SIZE); pxmitbuf = pxmitbuf + TXDESC_SIZE; _rtw_memcpy(pxmitbuf, skb->data, len); //RTW_INFO("mgnt_xmit, len=%x\n", pxmit_skb->len); // ----- prepare urb for submit ----- //translate DMA FIFO addr to pipehandle //pipe = ffaddr2pipehdl(pdvobj, MGT_QUEUE_INX); pipe = usb_sndbulkpipe(pdvobj->pusbdev, pHalData->Queue2EPNum[(u8)MGT_QUEUE_INX]&0x0f); usb_fill_bulk_urb(urb, pdvobj->pusbdev, pipe, pxmit_skb->data, pxmit_skb->len, rtl8192cu_hostap_mgnt_xmit_cb, pxmit_skb); urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(urb, &phostapdpriv->anchored); rc = usb_submit_urb(urb, GFP_ATOMIC); if (rc < 0) { usb_unanchor_urb(urb); kfree_skb(skb); } usb_free_urb(urb); _exit: rtw_skb_free(skb); #endif return 0; } #endif