mirror of
https://github.com/morrownr/8821cu-20210916.git
synced 2024-11-29 08:38:05 +00:00
184 lines
6.3 KiB
Markdown
184 lines
6.3 KiB
Markdown
### FAQ
|
|
|
|
Secure Boot Information
|
|
|
|
Question: The driver installation script completed successfully and the
|
|
driver is installed but does not seem to be working. What is wrong?
|
|
|
|
Answer: This question often comes up after installing the driver to a
|
|
system that has Secure Boot on. To test if there is a Secure Boot related
|
|
problem, turn secure boot off in the system BIOS and reboot. If the driver
|
|
works as expected after reboot, them the problem is likely related to
|
|
Secure Boot.
|
|
|
|
What will increase my chances of having a sucessessful installation on a
|
|
system that has Secure Boot on?
|
|
|
|
First and foremost, make sure Secure Boot is on when you initially install
|
|
your Linux distro. If your Linux distro was installed with Secure Boot off,
|
|
the easiest solution is likely to do a clean reinstallation with Secure Boot
|
|
on.
|
|
|
|
Ubuntu is used as the example but other distros should be similar to one
|
|
degree or another. During the installation there will be a box on one of
|
|
installation pages that will appear if the installation program detects
|
|
that Secure Boot is on. You will need to check the appropriate box and
|
|
supply a password. You can use the same password that you use for the system
|
|
if you wish. After the installation and reboot completes, the first screen
|
|
you should see is the mokutil screen. Mokutil will guide you through the
|
|
process of setting up your system to support Secure Boot. If you are unsure
|
|
what to do, I recommend you seek guidance from your distro documentation or
|
|
user forums. Having Secure Boot properly set up in your installation is very
|
|
important.
|
|
|
|
The `install-driver.sh` script currently supports Secure Boot if `dkms`
|
|
is installed. Here is a link to the `dkms` website. There is information
|
|
regarding Secure Boot in two sections in the `README`.
|
|
|
|
https://github.com/dell/dkms
|
|
|
|
Here is a link regarding Debian and Secure Boot:
|
|
|
|
https://wiki.debian.org/SecureBoot
|
|
|
|
There is work underway to add Secure Boot support for systems that do not
|
|
have `dkms` available or if a manual installation is desired.
|
|
|
|
-----
|
|
|
|
Question: Is WPA3 supported?
|
|
|
|
Answer: WPA3-SAE is supported. It works well on most modern Linux distros
|
|
but not all. Generally the reason for WPA3 not working on Linux distros is
|
|
that the distro has an old version of wpa_supplicant or Network Manager.
|
|
Your options are to upgrade to a more modern distro such as those released
|
|
after mid-2022 or compile and install new versions of wpa_supplicant and/or
|
|
Network Manager.
|
|
|
|
-----
|
|
|
|
Question: I bought two usb wifi adapters based on this chipset and am
|
|
planning to use both in the same computer. How do I set that up?
|
|
|
|
Answer: Realtek drivers do not support more than one adapter with the
|
|
same chipset in the same computer. You can have multiple Realtek based
|
|
adapters in the same computer as long as the adapters are based on
|
|
different chipsets.
|
|
|
|
Recommendation: If this is an important capability for you, I have tested
|
|
Mediatek adapters for this capability and it does work with adapters that
|
|
use the following chipsets: mt7921au, mt7612u and mt7610u.
|
|
|
|
-----
|
|
|
|
Question: Why do you recommend Mediatek based adapters when you maintain
|
|
this repo for a Realtek driver?
|
|
|
|
Answer: Many new and existing Linux users already have adapters based on
|
|
Realtek chipsets. This repo is for Linux users to support their existing
|
|
adapters but my STRONG recommendation is for Linux users to seek out USB
|
|
WiFi solutions based on Mediatek chipsets. Mediatek is making and
|
|
supporting their drivers per Linux Wireless Standards guidance per the
|
|
Linux Foundation. This results in far fewer compatibility and support
|
|
problems. More information and recommended adapters shown at the
|
|
following site:
|
|
|
|
https://github.com/morrownr/USB-WiFi
|
|
|
|
-----
|
|
|
|
Question: Will you put volunteers to work?
|
|
|
|
Answer: Yes. Post a message in `Issues` or `Discussions` if interested.
|
|
|
|
-----
|
|
|
|
Question: I am having problems with my adapter and I use Virtualbox?
|
|
|
|
Answer: This [article](https://null-byte.wonderhowto.com/forum/wifi-hacking-attach-usb-wireless-adapter-with-virtual-box-0324433/) may help.
|
|
|
|
-----
|
|
|
|
Question: Can you provide additional information about monitor mode?
|
|
|
|
Answer: I have a repo that is setup to help with monitor mode:
|
|
|
|
https://github.com/morrownr/Monitor_Mode
|
|
|
|
Work to improve monitor mode is ongoing with this driver. Your reports of
|
|
success or failure are needed. If you have yet to buy an adapter to use with
|
|
monitor mode, there are adapters available that are known to work very well
|
|
with monitor mode. My recommendation for those looking to buy an adapter for
|
|
monitor mode is to buy adapters based on the following chipsets: mt7921au,
|
|
mt7612u, mt7610u, rtl8821cu, and rtl8812bu. My specific recommendations for
|
|
adapters in order of preference currently are:
|
|
|
|
ALFA AWUS036ACHM - long range - in-kernel driver
|
|
|
|
ALFA AWUS036ACM - in-kernel driver
|
|
|
|
ALFA AWUS036ACU - in-kernel driver (as of kernel 6.2) and [out-of-kernel driver](https://github.com/morrownr/8821cu)
|
|
|
|
To ask questions, go to [USB-WiFi](https://github.com/morrownr/USB-WiFi)
|
|
and post in `Discussions` or `Issues`.
|
|
|
|
-----
|
|
|
|
Question: How do I forget a saved WiFi network on a Raspberry Pi?
|
|
|
|
Note: This answer is for the Raspberry Pi OS without Network Manager active.
|
|
|
|
Step 1: Edit `wpa_supplicant.conf`
|
|
|
|
```
|
|
sudo ${EDITOR} /etc/wpa_supplicant/wpa_supplicant.conf
|
|
```
|
|
|
|
Note: Replace ${EDITOR} with the name of the text editor you wish to use.
|
|
|
|
#### Step 2: Delete the relevant WiFi network block (including the '`network=`' and opening/closing braces).
|
|
|
|
#### Step 3: Save the file.
|
|
|
|
#### Step 4: Reboot
|
|
|
|
-----
|
|
|
|
Question: How do I disable the onboard WiFi in a Raspberry Pi?
|
|
|
|
Note: This answer is for the Raspberry Pi OS.
|
|
|
|
Answer:
|
|
|
|
Add the following line to `/boot/config.txt`
|
|
|
|
```
|
|
dtoverlay=disable-wifi
|
|
```
|
|
|
|
-----
|
|
|
|
Question: I have an adapter with the 8821cu chipset and it supports
|
|
bluetooth. The bluetooth works but the wifi does not. What is wrong?
|
|
|
|
Answer: There appears to be an issue that is caused by makers setting up
|
|
adapters differently. The fix is to set the driver option ( `rtw_RFE_type` )
|
|
in 8821cu.conf. The easiest way to edit 8821cu.conf is to run the following
|
|
from the driver directory:
|
|
|
|
```
|
|
sudo ./edit-options.sh
|
|
```
|
|
|
|
Once in the document, you can scroll down to the documentation about
|
|
`rtw_RFE_type`. You will likely have to experiment to find out what setting
|
|
works best for your adapter but a good place to start is probably...
|
|
|
|
```
|
|
rtw_RFE_type=7
|
|
```
|
|
|
|
Simply add that option to the end of the `options` line, save and reboot.
|
|
|
|
-----
|