/******************************************************************************
 *
 * Copyright(c) 2007 - 2017 Realtek Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 *****************************************************************************/
/*++
Copyright (c) Realtek Semiconductor Corp. All rights reserved.

Module Name:
	HalPwrSeqCmd.c

Abstract:
	Implement HW Power sequence configuration CMD handling routine for Realtek devices.

Major Change History:
	When       Who               What
	---------- ---------------   -------------------------------
	2011-10-26 Lucas            Modify to be compatible with SD4-CE driver.
	2011-07-07 Roger            Create.

--*/
#include <HalPwrSeqCmd.h>


/*
 *	Description:
 *		This routine deal with the Power Configuration CMDs parsing for RTL8723/RTL8188E Series IC.
 *
 *	Assumption:
 *		We should follow specific format which was released from HW SD.
 *
 *	2011.07.07, added by Roger.
 *   */
u8 HalPwrSeqCmdParsing(
	PADAPTER		padapter,
	u8				CutVersion,
	u8				FabVersion,
	u8				InterfaceType,
	WLAN_PWR_CFG	PwrSeqCmd[])
{
	WLAN_PWR_CFG	PwrCfgCmd = {0};
	u8				bPollingBit = _FALSE;
	u8				bHWICSupport = _FALSE;
	u32				AryIdx = 0;
	u8				value = 0;
	u32				offset = 0;
	u8				flag = 0;
	u32				pollingCount = 0; /* polling autoload done. */
	u32				maxPollingCnt = 5000;

	do {
		PwrCfgCmd = PwrSeqCmd[AryIdx];


		/* 2 Only Handle the command whose FAB, CUT, and Interface are matched */
		if ((GET_PWR_CFG_FAB_MASK(PwrCfgCmd) & FabVersion) &&
		    (GET_PWR_CFG_CUT_MASK(PwrCfgCmd) & CutVersion) &&
		    (GET_PWR_CFG_INTF_MASK(PwrCfgCmd) & InterfaceType)) {
			switch (GET_PWR_CFG_CMD(PwrCfgCmd)) {
			case PWR_CMD_READ:
				break;

			case PWR_CMD_WRITE:
				offset = GET_PWR_CFG_OFFSET(PwrCfgCmd);

#ifdef CONFIG_SDIO_HCI
				/*  */
				/* <Roger_Notes> We should deal with interface specific address mapping for some interfaces, e.g., SDIO interface */
				/* 2011.07.07. */
				/*  */
				if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO) {
					/* Read Back SDIO Local value */
					value = SdioLocalCmd52Read1Byte(padapter, offset);

					value &= ~(GET_PWR_CFG_MASK(PwrCfgCmd));
					value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd));

					/* Write Back SDIO Local value */
					SdioLocalCmd52Write1Byte(padapter, offset, value);
				} else
#endif
				{
#ifdef CONFIG_GSPI_HCI
					if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
						offset = SPI_LOCAL_OFFSET | offset;
#endif
					/* Read the value from system register */
					value = rtw_read8(padapter, offset);

					value = value & (~(GET_PWR_CFG_MASK(PwrCfgCmd)));
					value = value | (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd));

					/* Write the value back to sytem register */
					rtw_write8(padapter, offset, value);
				}
				break;

			case PWR_CMD_POLLING:

				bPollingBit = _FALSE;
				offset = GET_PWR_CFG_OFFSET(PwrCfgCmd);

				rtw_hal_get_hwreg(padapter, HW_VAR_PWR_CMD, &bHWICSupport);
				if (bHWICSupport && offset == 0x06) {
					flag = 0;
					maxPollingCnt = 100000;
				} else
					maxPollingCnt = 5000;

#ifdef CONFIG_GSPI_HCI
				if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
					offset = SPI_LOCAL_OFFSET | offset;
#endif
				do {
#ifdef CONFIG_SDIO_HCI
					if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
						value = SdioLocalCmd52Read1Byte(padapter, offset);
					else
#endif
						value = rtw_read8(padapter, offset);

					value = value & GET_PWR_CFG_MASK(PwrCfgCmd);
					if (value == (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd)))
						bPollingBit = _TRUE;
					else
						rtw_udelay_os(10);

					if (pollingCount++ > maxPollingCnt) {
						RTW_ERR("HalPwrSeqCmdParsing: Fail to polling Offset[%#x]=%02x\n", offset, value);

						/* For PCIE + USB package poll power bit timeout issue only modify 8821AE and 8723BE */
						if (bHWICSupport && offset == 0x06  && flag == 0) {

							RTW_ERR("[WARNING] PCIE polling(0x%X) timeout(%d), Toggle 0x04[3] and try again.\n", offset, maxPollingCnt);
							if (IS_HARDWARE_TYPE_8723DE(padapter))
								PlatformEFIOWrite1Byte(padapter, 0x40, (PlatformEFIORead1Byte(padapter, 0x40)) & (~BIT3));

							PlatformEFIOWrite1Byte(padapter, 0x04, PlatformEFIORead1Byte(padapter, 0x04) | BIT3);
							PlatformEFIOWrite1Byte(padapter, 0x04, PlatformEFIORead1Byte(padapter, 0x04) & ~BIT3);

							if (IS_HARDWARE_TYPE_8723DE(padapter))
								PlatformEFIOWrite1Byte(padapter, 0x40, PlatformEFIORead1Byte(padapter, 0x40)|BIT3);

							/* Retry Polling Process one more time */
							pollingCount = 0;
							flag = 1;
						} else {
							return _FALSE;
						}
					}
				} while (!bPollingBit);

				break;

			case PWR_CMD_DELAY:
				if (GET_PWR_CFG_VALUE(PwrCfgCmd) == PWRSEQ_DELAY_US)
					rtw_udelay_os(GET_PWR_CFG_OFFSET(PwrCfgCmd));
				else
					rtw_udelay_os(GET_PWR_CFG_OFFSET(PwrCfgCmd) * 1000);
				break;

			case PWR_CMD_END:
				/* When this command is parsed, end the process */
				return _TRUE;
				break;

			default:
				break;
			}
		}

		AryIdx++;/* Add Array Index */
	} while (1);

	return _TRUE;
}